Due to the success of my Mounted Trash Bin, I've created this standalone version. It's a large trashcan that prints in several parts optimized for 3D printing, with plenty of variations and optional additions for total customization!

---

_**Printing & Assembly**_

Due to the optimized design, you can print most of these parts using default print settings. Nearly all the parts print without supports, but the new Locking Inner Rim requires support generation for a long bridge to allow for the improved lid flap.

Here is a description of the various parts:

- **Lid_Locking** : The lid of the trashcan, which snaps into place when fully opened for one handed operation. Print with 4 shells/perimeters for a hinge longevity.
- **Top_Rim_Inner_Locking** : Snap the Lid into this part. _Enable Supports!_
- **Top_Rim_Inner_Locking_Loose** _(optional)_ : A looser version of the Inner Rim, useful for thicker trashbags or less precise printing. _Enable Supports!_
- **Top_Rim_Outer** : This is the part you wrap the top of your trash bag around, which is then sandwiched into place with the Inner Rim. _There is an oval notch on the front of both the Inner and Outer Rim. Make sure they're oriented the same way!_
- **Lid_OG** _(optional)_ : The original version of the lid, without a flap on the front, and doesn't lock in the open position
- **Top_Rim_Inner_OG** _(optional)_ : Only use with Lid_OG
- **Corner_Post** : The four vertical posts that connect the Top and Bottom Rims. I would suggest 4+ perimeters/shells for strength. Print 4. Align with the channels on the Bottom_Rim and snap all 4 into place. Then set the Top_Rim_Outer onto the four posts and press each corner straight down to snap into place.
- **Bottom_Tray** _(optional)_ : This tray rests inside the Bottom_Rim to support the bottom of the trash bag. Useful if you're throwing away heavy things that might rip the bag if unsupported.
- **Bottom_Tray_Deep** _(optional)_ : Another version of the bottom tray with higher walls. Usefull if you are tossing things that might leak.
- **Foot_TPU** _(optional)_ : Small feet to be printed with TPU or another flexible filament. These are simply glued to the corners of the bottom of the Outer_Rim to add a cushion between bin and floor, for protection and non-slip.
- **Walls_Plain** _(optional)_ : Conceal the trash bag and keep it from bulging out if it's larger than the bin. Print in vase mode with 0.6mm extrusion width and 0 top/bottom solid layers. 
- **Walls_Fluted** _(optional) : Same as Walls_Plain but with a fluted texture that adds a bit of strength and decorative appearance. More likely to warp from filament shrinkage while printing!

---

Yes, it's a lot of parts, but the result is a nice, large, super functional trashcan that you can customize to your needs! Leave a comment if you have any questions or requests and I'll respond ASAP!

- **Nov 2, 2025 Update** : Added an 'ExtraFlex' version of the Corner Posts, which makes it easier to take apart and put together over and over.

---


Photographed model was printing with various PLA filaments on the [Qidi Plus4](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK))

Wireframe Wastebin // Standalone Trashcan

Lid_Locking.stl

Corner_Post(4)_ExtraFlex.stl

I designed this switch for a game I'm working on, and it turned out so satisfying that I made it into this compact fidget keychain. It's printed in several parts for easy customization and the internal flat spring creates an almost magnetic feel without the rare earth minerals!

Add color indicators and use it to track things, or just flick it for the fun of it.

For more extras and variations, check out the [bonus pack here](https://than.gs/m/1313223?affiliateCode=MAKE). There is also a [Big Snappy Switch](https://than.gs/m/1313210?affiliateCode=MAKE).

---

**_Printing Guidelines_**

Check out [this short](https://www.youtube.com/shorts/Nx2y7_GfCkQ) for assembly tips. Adding a tiny bit of oil and then running the print under water really does wonders for smoothness! 

The download includes standard and 'lite' versions of the spring, case front, and case back. The standard version has a stiffer snap, while the lite version is super easy to flip back and forth. You must use either OG or Lite versions for each of those files for perfect fit. You can also print the outer case with or without the loop for a keychain.

Print the 'ColorTag' twice in different colors to use as an indicator switch.

Use your standard best settings at 0.16mm layer height. 2 shells and 15% infill works well.



Snappy Switch Keychain

SnappyOG_CaseBack_Keychain.stl

Buck the Wingless Duck is here to enjoy the springtime! He will keep you company, patient and oh so content. He cannot fly, but even if he could, he would stick around because you're pretty cool!

---

**_Printing Guidelines_**

Print using standard settings. Lower layer heights will help show off Buck's smooth featherless form. Little to no infill necessary... I used Lightning infill to represent Buck's thunderous confidence (and minimize filament usage). No supports necessary, but you may want to use a brim for the small parts to ensure bed adhesion. I also used seam-painting to run the seam along Buck's back and the bottom of his legs.

Two sizes available, print all the parts at 42mm or 84mm sizes. You'll want to print the 'Peepers' twice to give Buck stereo vision. Glue all the parts together with [E6000](https://amzn.to/42xH4Ot), cyanoacrylate, or your preferred adhesive. 42mm Buck has some tiny parts so you may need tweezers and steady hands for clean assembly!

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Basic Sunflower Yellow](https://bit.ly/bamFIL) and [Elegoo Rapid PLA+ Black and White](https://shrsl.com/4vqfx) (Also on [Amazon](https://amzn.to/4iioPSQ)).**

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

Multi-part

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wireframe Wastebin // Standalone Trashcan