Plantronics CS55 Wireless Headset

HeadsetFinal.stl

Bookmarks (Jordan and Ballerina)

A couple bookmarks I made for family members

Phone Charging Pocket

Flat back for double-sided tape, sized for Samsung S9/S10/Note9/Note10. Pre-oriented, no support material required.

Designed in OnShape; fork this model to change dimensions for any other phone or tablet, or to use screw mounting instead of tape.
https://cad.onshape.com/documents/3be987bca2884950a6e0b1a3/w/3eea4fed50c1a6520a1a3433/e/66b773d0b0a293d3d3813465

mophie wireless charger/phone stand

I felt it was inconvenient to pick up my phone and take it off the charger to check my notifications. This allows you to have your phone charging and still be able to look at it.

I printed it at 10% infill and pla and its extremely sturdy, you likely could get away with a lower infill

This is also the second thing I have ever modeled

Elegant Phone holder For Iphone 7

I think I have a Iphone 7 and thats what I used to base my stand of off. if you have a wider phone you may want to print it so it will be wider. if your phone is slightly larger it should still work.
the swoop at the bottom is slightly too big for my phone but it does function.

I printed mine with a .4mm nozzle. the walls are 1.6mm thick meaning there is 4 layers of filament per wall. The object should be printed laying flat and you may need to lower the model  by -.1mm to get it to touch the plate properly.

Created by B._.render
CC-BY-NC

Belt Cell Phone Holder

SupCelCintoComp.stl

Baseus 65w Charger Gridfinity Box 3x2 v1.step

3x2 Gridfinity Holder for the popular Baseus 65w 20kmah charger.  Small hole in the bottom both for filament savings, and to allow use with the deckmate universal attachment

slim phone holder

print in place phone holder, about the same size as a phone

use supports on 80 degrees to support the adjusting arm

Bluetooth symbol, nestable box (v1)

Pixel 7 Pro Spigen Arcfield Stand

Stand for Spigen Arcfield to fit into. Height is optimized for Pixel 7 pro but may work for other phones as well!

Popsocket Phone Mount

PhoneMountv2.3mf

Universal Phone Holder 📱

This is an universal phone holder inspired by one I had some time ago.
It is a very simple design that allows you to use different types of mobile phones and tablets both vertically and horizontally.

It has two different sized guides to accommodate different device thicknesses.

If you print sideways you don't need to use supports. Surely printing it flat would not be necessary either since the separation is quite small.

You can find more phone stands here: [Phone Stands](https://cults3d.com/en/design-collections/Frikarte3D/phone-stand)

Hope you like it! Any advice, or recomendation is welcome!

Groot_Pixel Stand Final 2.3mf

I measured and designed a cellphone stand to have Groot holding my Google Pixel 6 Pro in a Spigen Tough Armor Case connected to an Elecjet Magnetic charger.   I downloaded Groot waving so I can't take credit for him but I modified him to hold pens or a plant in his head (with drainage hole to a birdsnest I put at his butt.)  I used Adobe Medium with a Link cable from my Oculus to my computer to sculpt in VR and save the OBJ

Caliper measured to place magnet at charge port and insert pins to hold it in place.  
Pixel 6 Pro case - https://www.amazon.com/gp/product/B0964K3MC7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Charger used -
https://www.amazon.com/gp/product/B083DSN8QW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


iPhone SE Holder for Magnetic Car Mounts 

This phone holder allows you to use you iPhone SE (Gen 2 or 3), iPhone 8  or iPhone 7 with a magnetic phone holder. Normally, you would just stick a metal plate to the back of the phone for the magnet to attract. However, attaching a metal plate to the back of the iPhone blocks the phone from wirelessly charging. The phone holder solves this problem. The metal plate can be attached to the back phone holder instead. Then you just slide the phone into the phone holder.

This holder is sized to fit this case: https://www.thingiverse.com/thing:4861842
If your case is a different size, then you will need to scale this file.

Mobile & Wireless Accessories

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Plantronics CS55 Wireless Headset

Bookmarks (Jordan and Ballerina)

Phone Charging Pocket

mophie wireless charger/phone stand

Elegant Phone holder For Iphone 7

Belt Cell Phone Holder

Baseus 65w Charger Gridfinity Box 3x2 v1.step

slim phone holder

View 468 new models

Pixel 7 Pro Spigen Arcfield Stand

Popsocket Phone Mount

View 18 new models

Groot_Pixel Stand Final 2.3mf

iPhone SE Holder for Magnetic Car Mounts

Rolling Storage Box - TPU Strap