This dual-color cracked skull design can be printed with translucent filament to let light shine through the cracks! 

See here for video: https://youtu.be/uCC3UsVzpis 


Cracked Skull

Skull.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***


Cute Unicorn MMU Split + Bambu 3mf (No Supports)

CuteUnicorn-SplitParts.3mf

Cute Unicorn (No supports)

cuteunicorn.stl

These dual-color cracked vase designs can be printed with translucent filament to let the light shine through the cracks! The distribution of cracks gives the appearance of a bullet hole through the vase.

See here for video: https://youtu.be/iKBhvfeoSeM 

Download the set:
Small: https://than.gs/m/887994 
Medium: https://than.gs/m/887997 
Large: https://than.gs/m/887999 



Bullet Hole Vase (Large)

Vase 50x90.stl

**Introducing my Quokka design!**  This adorable Australian marsupial has a reputation of being the happiest animal in the world.  It's hard to argue with that when you see their cute little smiles.  In honor of that, I am including two different head sculpts!  One with a closed mouth smile and one with an open mouth smile.

Check out a quick [Demo Video Here](https://youtu.be/CTClTSPxiHU)!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

Please, share photos of your makes! I would love to see them!


**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.patreon.com/matmire_makes) or [MMF Tribe](https://tinyurl.com/ye3tx7kb).

If you like this design, please check out my Socials and give a follow. More designs are coming soon!

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

**Printing Details**
-   **Head (Open or Closed Mouth version!):** Snap-Fit to Body.  No additional support needed.
-   **Body:** Print-In-Place. No additional support needed.
-   **Tail:** Snap-Fit to Body. Print-In-Place. No additional support needed.
-   **Multicolor 3MF:** includes multicolor 3MF file that is compatible with both PrusaSlicer and Bambu Studio
-   **Misc: Test Fit objects (Ball and Socket):** These are trimmed down versions of the head snap fit joint. Due to tolerance variation in printers, there is a chance that the fit could be too tight or too loose. You can print these test files to either dial in your printer settings, or make fine adjustments of the head scale in order to find the fit that works best for you. Note, tight joints will loosen somewhat as they wear-in.
-   **5%-15% Infill.**
-   **3 Walls.**

Check out a quick [Demo Video Here](https://youtu.be/CTClTSPxiHU)!**

**This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.

Quokka - Articulated Figure

MMM_Quokka_Multicolor_v02_bambuEtc.3mf

MMM_Quokka_Multicolor_v02_prusa.3mf

Bullet Hole Vase (Medium)

Vase 50x70.stl

Bullet Hole Vase (Small)

Vase 50x50.stl

This model is a slight variation of my previous [Filament-Cutter Base Module V4](https://thangs.com/designer/technik.gegg/3d-model/Filament-Cutter-Base-Module%20V4-942113), which I left in this publication for reference.
The new models utilize a genuine _Bambu Lab Cutter_ blade, which nowadays is easy to source and easier to replace (see pictures). 
The second variation uses a couple of neodymium magnets instead of a mechanical spring. For that you'll need two cylindrical magnets (N35 or better), one 5x10 mm for the Punch and the other 5x5 mm for the Base. Alternatively, the base will also work with two 5x3 mm magnets.
 
The two new variants also have some cut-outs that make it easier to remove dirt (debris), but also provide a good insight into its mechanical function.

Please keep in mind: Since this is a **Base-Module** only, it needs to be integrated into your printer / toolhead using CAD. 

A video of the (previous) model in operation is linked down below.

Mmu

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cracked Skull

Cute Unicorn MMU Split + Bambu 3mf (No Supports)

Bullet Hole Vase (Large)

Quokka - Articulated Figure