Klein Bottle Diamond Lattice

Klein Bottle - Diamond Lattice.stl

Easter Eggshell 1

Eggshell 1 Gyroid.stl

Lattice Easter Egg (Chain Link)

Lattice Egg - Chain Link.stl

Chain Link Klein Bottle

This model uses chain link latticing to represent a three-dimensional approximation of the four-dimensional “Klein Bottle.”

See here for video: https://youtu.be/AWJ-R3GBT80 

The concept of a Klein bottle was first described in 1882 by the German mathematician Felix Klein. It is a closed non-orientable surface that has no inside or outside. It is similar to the Möbius strip, but unlike the Möbius strip it has no boundaries and cannot physically exist in three-dimensional space.

In this three-dimensional representation, the surface intersects with itself, but in four-dimensional space the self-intersection can be eliminated. Unfortunately, I don’t have a 4D printer yet.

Modelling this intriguing shape in chain link latticing allows for visualization of the whole surface.


Headphone stand

model146.stl

Easter Eggshell 3

Eggshell 3 Rotated Square.stl

Easter Eggshell 2

Eggshell 2 Kelvin.stl

Chain Link Gridfinity Bin 2x2 (80mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Chain Link Gridfinity Bin 2x2 (20mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: 
Chain Link Gridfinity Bin 2x2 40mm: 
Chain Link Gridfinity Bin 2x2 60mm: 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Lattice Hearts

Lattice Heart - Diamond.stl

Lattice Easter Egg (Wicker)

Lattice Egg - Wicker.stl

Easter Eggshell 4

Eggshell 4 SplitP.stl

Pliers - 3D printable tool - Editable file (Autodesk Fusion + STEP)

pliers_flowalistik_part1.stl

Vase

model253.stl

Celtic Knot Bowl

This stone-textured bowl features a band of Celtic knot latticing.

See here for video: https://youtu.be/By4EBZ9ATp0 


Lattice Skull Diamond

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Easter Eggshell 6

Eggshell 6 Columns.stl

Seismic Vases - Cylindrical

Seismic Vase Cylinder Large.stl

Chain Link Gridfinity Bin 2x2 (40mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: 
Chain Link Gridfinity Bin 2x2 60mm: 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Chain Link Gridfinity Bin 2x2 (60mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Lattice

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Klein Bottle Diamond Lattice

Easter Eggshell 1

Lattice Easter Egg (Chain Link)

Chain Link Klein Bottle

Headphone stand

Easter Eggshell 3

Easter Eggshell 2

Chain Link Gridfinity Bin 2x2 (80mm)

Chain Link Gridfinity Bin 2x2 (20mm)

Lattice Hearts

Lattice Easter Egg (Wicker)

Easter Eggshell 4

Pliers - 3D printable tool - Editable file (Autodesk Fusion + STEP)

Vase

Celtic Knot Bowl

Lattice Skull Diamond

Easter Eggshell 6

Seismic Vases - Cylindrical

Chain Link Gridfinity Bin 2x2 (40mm)

Chain Link Gridfinity Bin 2x2 (60mm)