Giant Voronoi Split Globe Lamp

voronoiGlobe.stl

Wall lamp “Robur tree”

Body.stl

Asymmetric Table Lamp

Asymmetric_Table_Lamp_Shade.stl

LAMP (DOUBLE VERSION)

GROVE LAMP ESTERNO TOP.stl

DELTA RIDGE | Table lamp E14 & E27 fast-print

Delta_table-lamp-Shade.stl

RING | Fastprint Table Lamp

RING_table-lamp_Shade.STL

LAMP (WEAVE) 2V.

LAMP WEAVE INTRECCIO ESTERNO TOP.stl

Lamp (Weave) 1V.

TOP LAMP WEAVE.stl

TRIANGOLINO LAMP

TRIANGOLINO TOP.stl

Pallino Lamp

TOP PALLINO -1.stl

New year lamp.blend

Quadratino Lamp

TOP LAMP QUADRATINO.stl

Modular Lamp Blank 

Display Only Blank Lamp.stl

Cleo Lamp

Cleo Lamp Body.stl

Marshmello Lamp

RIVESTIMENTO ESTERNO CHIUSO.stl

Koone Lamp by 3esign.eth

Original design by PhD Poturak Semir: www.Linktr.ee/3esign : No needs for supports, regular print settings should do.

Moon Light // Dome Light Cover

Moon Lamp.stl

Crystal Lamp

TOP 177MM

SP00L Lamp

Spool is a 3d printable lamp design that gives new life to filament spools.

Those of us who print know what it's like to have spent spools lying around not knowing what to do with them, plus they are difficult to recycle. That's why I created this design that ingeniously plays with the spools to make the most of them.

If you give a lot of support to the design I will create a line of lamps with the same concept of reusing spools!

To assemble it you only have to print 4 times the same piece (SPOOL.stl), I recommend printing them 2 by 2. The next step would be to glue or solder two pieces so that you have two half-cylinders with the bases at the ends. These halves are attached to two spools, one at the top where the socket with the bulb will be attached, and another at the bottom. Finally, the two halves are tied together with string or you can even use filament scraps.

You can play with the combination of different types and colors of spools that you have: dark or transparent, plastic or cardboard... I used the dark spools from 3DJake and the transparent ones from Sakata 3D.

The outer diameter of the lamp is 22.5 cm, I left a margin so you can assemble it with coils of different brands of 1kg. You can even scale the design so that you can mount a smaller version with smaller spools!

For more clarification you can check my Instagram where I will be posting more information about the project:
https://www.instagram.com/creaserra


3D PRINTING SETTINGS
For the model (SPOOL.stl) it should be printed using transparent PLA (I used from 3DJake) in the optimal orientation (big base down) and using the following parameters:

Infill: 0%
No Support
No adhesion
Layer height: 0.3 mm
Top layers 4
Bottom layers 4
Wall line count: 3
Nozzle size: 0.4 mm
Line width: 0.4 mm
Nozzle temperature: 210ºC
Retraction: Yes

Spool Lamp

Sliding lamp

Lamps & Lighting

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Giant Voronoi Split Globe Lamp

Wall lamp “Robur tree”

Asymmetric Table Lamp

LAMP (DOUBLE VERSION)

DELTA RIDGE | Table lamp E14 & E27 fast-print

RING | Fastprint Table Lamp

LAMP (WEAVE) 2V.

Lamp (Weave) 1V.

TRIANGOLINO LAMP

Pallino Lamp

New year lamp.blend

Quadratino Lamp

Modular Lamp Blank

Cleo Lamp

View 25 new models

View 21 new models

View 10 new models

Crystal Lamp

SP00L Lamp

Sliding lamp