**For Instructions Download the:**
>[GEN2 Interactive Catalog Download](https://tinyurl.com/GEN2system)

The Crystal Series is part of the GEN2 Decor series. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - https://than.gs/m/1116945

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Handles - Crystal

Crystal B Wide - Handle 44mm .stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
__________________________________________________

The BlockBar Series is part of the **GEN2 Decor series**. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4dEgnLM) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**UPDATE: V1.1** (1-21-2024)
• This update omitted the M3 nut slot and instead uses a new self-tapping hole for M3 screws.
• I've also added a few of my original BlockBar handle designs that didn't make the initial cut

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Handles - BlockBar

V1.1 BlockBar A - Handle 44mm.stl

V1.1 BlockBar B - Handle 44mm.stl

V1.1 BlockBar C - Handle 44mm.stl

V1.1 BlockBar D - Handle 44mm.stl

V1.1 BlockBar E - Handle 44mm.stl

V1.1 BlockBar F - Handle 44mm.stl

V1.1 BlockBar Knob.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
__________________________________________________

The Essential Series is a collection of drawer faceplates for the **GEN2 Decor Series**. Simply print the drawer bodies HERE, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with an M3 screw and nut.

The key feature of Essential series offers is the ability to customize the faceplate easily in a number of way. With a flat surface you can print with different textured beds for pleasing appearance or add logos, designs, or text within your slicer.

Faceplates are available in two variations, a single center hole for knobs or a two holes for handles. Oh right! let's look at available handles so you can see what's available.

**Update 10/3/2024:** _V1.1 - Slightly larger to cover top and bottom gaps in drawer cases_

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)
 
**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Poplar Wood Filament](https://amzn.to/3X0rYzz) (this is what I used in many of my photos) ps. use hardened nozzle for abrasive filaments.
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.


GEN2 Decor - Faceplates - Essential Series

Essential 4W-15H.stl

Essential 4W-05H.stl

Essential 4W-2H.stl

Essential 4W-1H.stl

Essential 3W-15H.stl

Essential 3W-05H.stl

Essential 3W-2H.stl

Essential 3W-1H.stl

Essential 2W-15H.stl

Essential 2W-05.stl

Essential 2W-3H.stl

Essential 2W-2H.stl

Essential 2W-1H.stl

Essential 1W-15H.stl

Essential 1W-05H.stl

Essential 1W-3H.stl

Essential 1W-2H.stl

Essential 1W-1H.stl

4W-15H Back Cover.stl

4W-05H Back Cover.stl

4W-2H Back Cover.stl

4W-1H Back Cover.stl

3W-15H Back Cover.stl

3W-05H Back Cover.stl

3W-2H Back Cover.stl

3W-1H Back Cover.stl

2W-15H Back Cover.stl

2W-05H Back Cover.stl

2W-3H Back Cover.stl

2W-2H Back Cover.stl

2W-1H Back Cover.stl

1W-15H Back Cover.stl

1W-05H Back Cover.stl

1W-3H Back Cover.stl

1W-2H Back Cover.stl

1W-1H Back Cover.stl

Essential 4W-15H.3mf

Essential 4W-05H.3mf

Essential 4W-2H.3mf

Essential 4W-1H.3mf

Essential 3W-15H.3mf

Essential 3W-05H.3mf

Essential 3W-2H.3mf

Essential 3W-1H.3mf

Essential 2W-3H.3mf

Essential 1W-2H.3mf

Essential 2W-2H.3mf

Essential 1W-15H.3mf

Essential 1W-05H.3mf

Essential 1W-3H.3mf

Essential 1W-1H.3mf

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This GEN2 Decor Drawers - STANDARD is a collection of the standard length drawer bodies. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.
__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length.

To customize these drawer here are my recommended links to get started, you can also fin more at jerrari3d.com
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Decor Gridfinity Magnet Drawers - STANDARD

gen2-2x1-decor-gridfinity-magnet-double-drawer-standard.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
_______________________

The EdgeMetal Series is a collection of drawer faceplates for the **GEN2 Decor Series**. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.

The EdgeMetal series has a strong sharp look unlike anything else. Printed in a highly reflective filament, the angled corners generate an striking appearance. Print as one solid color or experiment with multicolor printing for some really fascinating results.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)
 
**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4g88Hn8) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)

**INSTRUCTIONS**
• Print the model laying face up, no supports needed
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Faceplate - EdgeMetal

EdgeMetal - Single - 44mm Handle.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This is a collection of the SMALL length drawer bodies. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.
__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in SMALL length. Here are my recommended links to get started:
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

GEN2 Decor Drawers - SMALL

GEN2 1x0.5 Slim Single Case - SMALL.stl

GEN2 1x0.5 Slim Single Drawer - SMALL.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 270 Decor Drawers are part of the GEN2 QuickLock Modular System, a 3D printable storage system designed to be expanded, rearranged, and customized over time.

This listing includes all **18 size variations** of the 270 Decor Drawer collection. The 270 collection is one of the deepest GEN2 drawer sizes, making it ideal for larger storage needs around a desk, workshop, maker space, garage, or home.

The **v2602 update** is a major redesign of the Decor drawer system. These drawers now print faster, use less material, and no longer require purchased hardware for the front faceplate assembly. The new open-front design works with updated GEN2 Decor Faceplates and printed attachment features, making the system easier to print, assemble, and customize.

Decor Drawers use swappable faceplates and handles, so you can change the look of your storage setup without replacing the entire drawer. Mix colors, materials, handle styles, and faceplate designs to make the system fit your space.

For a complete Decor Drawer setup, you will also need compatible GEN2 Cases, Decor Faceplates, and handles or knobs.

See the **Instructions** tab for setup details, compatibility notes, related parts, and assembly guidance.

GEN2 270 Decor Drawers - All

decor-drawer-270-1w-1h.stl

decor-drawer-270-1w-2h.stl

decor-drawer-270-1w-3h.stl

decor-drawer-270-1w-05h.stl

decor-drawer-270-1w-15h.stl

decor-drawer-270-2w-1h.stl

decor-drawer-270-2w-2h.stl

decor-drawer-270-2w-3h.stl

decor-drawer-270-2w-05h.stl

decor-drawer-270-2w-15h.stl

decor-drawer-270-3w-1h.stl

decor-drawer-270-3w-2h.stl

decor-drawer-270-3w-05h.stl

decor-drawer-270-3w-15h.stl

decor-drawer-270-4w-1h.stl

decor-drawer-270-4w-2h.stl

decor-drawer-270-4w-05h.stl

decor-drawer-270-4w-15h.stl

drawer-stoppers.stl

gen2-ql-locking-mechanism-bi-directional-optional.stl

gen2-quicklocks-v111.stl

magnet-insert-6x2mm.stl

magnet-insert-10x2mm.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
__________________________________________________

The Deco Series is part of the GEN2 Decor system. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.
__________________________________________________

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Polymaker Silk Brass](https://amzn.to/4ftPUSn) (Creates a pleasant metal looking handle)
• (Optional) Filament - [Protopasta Bronze PLA](https://amzn.to/4heZzxs) (this is what I used in my photos, I polished the filament for a smooth appearance)
• (Optional) - [Green Patina Aging Solution](https://amzn.to/4hdBtDp) (ages the bronze filament)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.


GEN2 Decor Handles - Deco Series

Deco 44mm.stl

Visit [JERRARI3D.com](https://www.jerrari3d.com/)  
For instructions and a complete look at the entire GEN2 collection.  
__________________________________________________

### The GEN2 Modular System
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, it lets you print exactly what you need and customize each piece to match your unique style and space.  

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you unlimited expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless—so your storage can grow and adapt with you.  

---

### GEN2 Chevron Series
Where 3D printing meets home design, bringing the signature GEN2 modular system into spaces beyond the workshop. With its clean, angled pattern and subtle texture, the Chevron faceplate adds a modern, furniture-like touch whether it’s organizing coffee pods, craft supplies, or small tools.  

Designed for full customization, each faceplate supports your choice of handle or knob attached with standard M3 screws, letting you tailor both function and style. From carbon-fiber-infused prints that pop on a workbench to soft neutral tones that complement a kitchen counter, the Chevron Series proves that 3D-printed storage can look at home anywhere.  

---

### What You’ll Need
**BASE DRAWER MODELS**  
• GEN2 Decor Drawers – Standard – [DOWNLOAD](https://than.gs/m/1116945)  

**HANDLES / KNOBS**  
• BlockBar Series – [DOWNLOAD](https://than.gs/m/1116949)  
• Crystal Series – [DOWNLOAD](https://than.gs/m/1134382)  
• Deco Handle / Knob Collection – [DOWNLOAD](https://than.gs/m/1159960)  

**HARDWARE**  
Includes affiliated links to help support my projects:  
• Filament – [Poplar Wood Filament](https://amzn.to/3X0rYzz) (used in many of my photos). Use a hardened nozzle for abrasive filaments.  
• M3 nuts and screws – Stainless-Steel or Steel (screw length may vary depending on your faceplate and drawer combo—kits like [this one](https://amzn.to/3LSaQFv) offer a variety of lengths to help you find the perfect fit).  

---

### Optional Accessories
Take your Decor setup even further with compatible accessories and inserts:  
• K-Cup Insert – Perfect for coffee stations and home setups – [DOWNLOAD](https://than.gs/m/1159960)  
• Additional GEN2 Decor Add-ons – Organizers, inserts, and new modules are always being added at [JERRARI3D.com](https://www.jerrari3d.com/).  

---

### Instructions
1. Push M3 nuts into the slots on handles or knobs.  
2. Slide the faceplate into position on your GEN2 Decor Drawer.  
3. Insert an M3 screw from inside the drawer, through the faceplate, and into the handle’s nut to secure it in place.  

*Note:* Some handle designs include self-tapping screw versions, so M3 nuts are not always required.  

---

### Slicing Tips
Both 3MF and STL files are included.  
- The 3MF file is pre-sliced and ready to print (just select your printer).  
- When using the STL file, split it into parts for multi-color printing.  
- Works in PrusaSlicer, Bambu Studio, and similar slicers.  
- Prints face down for textured build plates or face up—no supports required.  

---

### Updates
**2025-10-04** – Recreated all models from the ground up to support the latest faceplate design, now compatible with all Decor Drawer sizes including 3W and 4W units.  

---

### License
The Non-Commercial license applies only to selling printed models.  
You’re absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍  


GEN2 Decor - Faceplates - Chevron

1W-1H - V2 - Handle.stl

1W-2H - V2 - Handle.stl

1W-05H - V2 - Handle.stl

1W-15H - V2 - Handle.stl

2W-1H - V2 - Handle.stl

2W-2H - V2 - Handle.stl

2W-05H - V2 - Handle.stl

2W-15H - V2 - Handle.stl

3W-1H - V2 - Handle.stl

3W-05H - V2 - Handle.stl

4W-1H - V2 - Handle.stl

4W-05H - V2 - Handle.stl

1W-1H - V2 - Handle.3mf

1W-2H - V2 - Handle.3mf

1W-05H - V2 - Handle.3mf

1W-15H - V2 - Handle.3mf

2W-1H - V2 - Handle.3mf

2W-2H - V2 - Handle.3mf

2W-05H - V2 - Handle.3mf

2W-15H - V2 - Handle.3mf

3W-1H - V2 - Handle.3mf

3W-05H - V2 - Handle.3mf

4W-1H - V2 - Handle.3mf

4W-05H - V2 - Handle.3mf

1W-1H - V2 - Knob.stl

1W-2H - V2 - Knob.stl

1W-05H - V2 - Knob.stl

1W-15H - V2 - Knob.stl

2W-1H - V2 - Knob.stl

2W-2H - V2 - Knob.stl

2W-05H - V2 - Knob.stl

2W-15H - V2 - Knob.stl

3W-1H - V2 - Knob.stl

3W-05H - V2 - Knob.stl

4W-1H - V2 - Knob.stl

4W-05H - V2 - Knob.stl

1W-1H - V2 - Knob.3mf

1W-2H - V2 - Knob.3mf

1W-05H - V2 - Knob.3mf

1W-15H - V2 - Knob.3mf

2W-1H - V2 - Knob.3mf

2W-2H - V2 - Knob.3mf

2W-05H - V2 - Knob.3mf

2W-15H - V2 - Knob.3mf

3W-1H - V2 - Knob.3mf

3W-05H - V2 - Knob.3mf

4W-1H - V2 - Knob.3mf

4W-05H - V2 - Knob.3mf

Looks like a gem, but then again, what gem could look like this?

For more details, visit my upload on [Printables](https://www.printables.com/model/310952-the-impossible-gem-knob).

Please like it if you do and leave any comments!  If you're really feeling generous please consider **[buying me a coffee](https://www.paypal.com/donate/?business=9MATZX4ESRAB6&no_recurring=0&item_name=Help+me+to+continue+designing+and+creating+3D+models+for+you+all+with+some+spare+change+for+coffee+%3A%29&currency_code=USD)** so I can keep creating!

Check out my [TikTok](https://www.tiktok.com/@gcv3d)!

Check out my [YouTube](https://www.youtube.com/channel/UC5bZDx5pKcU-l8q12rkAs9w)!

If you like what you see, please consider joining my [Patreon](https://www.patreon.com/GCV3D).



The Impossible Gem Knob

The Impossible Gem Knob_short.stl

KNOB

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEN2 Decor - Handles - Crystal

GEN2 Decor Gridfinity Magnet Drawers - STANDARD