Sitting Cat Desk Decor

SittingCat-Body_holoprops.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Medium Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Kitty Clickers

Bases - Kitty Clickers.3mf

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Medium Tolerance Snappy Cat:**
Coming Soon
**Loose Tolerance Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Stackable Kitty Tray

Kitty Tray.stl

Kitty Bookmarks

Long_Kitty_bookmark_tabby_stl.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Loose Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Medium Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940296

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

My Dream Monster -Kitty

MyDreamMonsterKitty4Color3MF_FunFam3D.3mf

Kawaii Cat Loot Box -  No support

Top_Cat_EpicBox_Holoprops.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

3DL Mini Lions

3DL_mini_lions.3mf

Mother's Day Roseables Cat

CatRoseable1Color3MF_FunFam3D.3mf

Fluffy Switch Dock

Fluffy_Switch_Dock_by_Holoprops.stl

Halloween Pusheen Kitten Pumpkin / 3MF Included / No Supports

Pusheen Pumpkin Kitten Pot.stl

Ghost Cat Halloween Decor

GhostCat.stl

 Zombie Kitty

Teal Cat Creative Zombie Kitty.stl

Cat Wall Art Kitty Wall Decor Kitten 3D Optical Illusion Art

cat 3d optical illusion.stl

Box Cat Fidget Clicker Keychain

Boxcat_Clicker_v01.3mf

Balloon Cat

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
A fun series of balloon animals I've always wanted to make! Hope you enjoy!

***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chaoscoretech

KITTY

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Sitting Cat Desk Decor

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Kitty Clickers

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

Stackable Kitty Tray

Kitty Bookmarks

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

My Dream Monster -Kitty

Kawaii Cat Loot Box - No support

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

3DL Mini Lions

Mother's Day Roseables Cat

Fluffy Switch Dock

Halloween Pusheen Kitten Pumpkin / 3MF Included / No Supports

Ghost Cat Halloween Decor

Zombie Kitty

Cat Wall Art Kitty Wall Decor Kitten 3D Optical Illusion Art

Box Cat Fidget Clicker Keychain

Balloon Cat