Hybrid Hanging/Desk Jupiter Lamp

Jupiter Lithopanes

This is a Jupiter Lithopane for you to remix. It's based on actual NASA imagery.
If you need a different size check my page out I also have diameters 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width i recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

Jupiter Lithopane

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hybrid Hanging/Desk Jupiter Lamp

Jupiter Lithopanes