Setting aside the obvious food safety issues here, you should definitely print one for your next Halloween party!

You'll regret watching the video, but here it is: https://youtu.be/dgwsM9Ma6t0 
 
The threads are sized for a standard Heinz ketchup bottle.

So gross. In so many ways.


Skull Ketchup Cap

Setting aside the obvious food safety issues here, you should definitely print one for your next Halloween party!

You'll regret watching the video, but here it is: https://youtu.be/dgwsM9Ma6t0 

The threads are sized for a standard Heinz ketchup bottle.

So gross. In so many ways.


The ventricles in this full-sized anatomically correct human heart are large enough to hold a nice selection of chocolates. For your weirdo Valentine. Or cardiologist. The model can be used again for Halloween.

See here for video: https://youtu.be/k8YbW3daSc0 

There are four versions provided: “Plain,” “Magnet,” “Supports,” and “Support Magnet”. Each version includes a “Lid” and “Base”

In the “Plain” version, the Lid is held loosely in place with the overlap of the atria around the ventricles. If you want the lid held more securely, print one of the “Magnet” versions and insert four 3mmx3mm (1/8” x 1/8”) cylindrical neodymium magnets into the two holes in the Lid and Base.

The “Supports” versions are pre-supported on the inner overhangs that are not reachable from the build plate. You will still need to add supports to the bottom.

Print both files as oriented. The “Base” prints in normal orientation, but the lid needs to print upside down to preserve the smoothness of the contact area and ensure that the lid fits nicely on the base. 

I recommend raising the Lid off the surface of the build plate by 3mm and building tree supports underneath. This means that you will need to do a bit of cleanup on what will become top of the lid.


Open Heart Chocolate Box

Display only do not print.stl

Make Flu Season more festive this year with this offbeat Nose Box tissue dispenser! Give it to a friend? Bring it to the office? Who nose, it just might catch on!

See here for video: https://youtu.be/7JLSfzse0xQ 
 
This nose box is sized to fit an 11x11x13cm tissue box such as the one pictured.

The box prints upside-down to eliminate the need to build supports for the noses. You’ll need to put in a small amount of support under the open edge where the lid inserts. Given the relatively small footprint on the first layer, brim is recommended.

The lid should be snug to slide in at first. Slide it back and forth a few times to smooth out contact surfaces. If it is still too tight, file a very small amount off the slide surfaces of the lid, retesting the fit as you go. Don’t take too much off or the lid will be loose!

If noses on boxes aren’t your thing and you’re just looking for a plain tissue box, try this one: https://social.thangs.com/m/451804 . See here for video: https://youtu.be/isOyi836-U0


Nose Box

Nose Box Display only do not print.stl

Tired of your kids/classmates/coworkers coming to you with stupid excuses? This cheesy desktop pun can help you get through it. 

See here for video: https://youtu.be/JsiyiJYPUkM 
 
For first time excuses, run your fingers along the “Knot My Problem” text and quietly repeat the words “Knot My Problem, Knot My Problem…” If the problem does not go away, increase volume.

If the excuses persist, hand “Knot My Problem” to the offender, get up, and leave the room.

If you’ve tried everything and the excuses just won’t let up, you may throw “Knot My Problem” at the whiner in a fit of frustration. 

DISCLAIMER: Don’t blame me if you injure them or break something. Knot My Problem.


Knot My Problem

Tired of your kids/classmates/coworkers coming to you with stupid excuses? This cheesy desktop pun can help you get through it. 

See here for video: https://youtu.be/JsiyiJYPUkM 

For first time excuses, run your fingers along the “Knot My Problem” text and quietly repeat the words “Knot My Problem, Knot My Problem…” If the problem does not go away, increase volume.

If the excuses persist, hand “Knot My Problem” to the offender, get up, and leave the room.

If you’ve tried everything and the excuses just won’t let up, you may throw “Knot My Problem” at the whiner in a fit of frustration. 

DISCLAIMER: Don’t blame me if you injure them or break something. Knot My Problem.


Pop this Zit Vase on your printer, go wash your hands and don’t touch your face. This dual color print is so gross you won’t be able to turn away. Honestly, even reading this description is going to make you queasy. Don’t say I didn’t warn you.

See here for video: https://youtu.be/C6m6XKhYqII 

There are three sizes of Zit Vases:

Small: https://than.gs/m/903479 
Medium: https://than.gs/m/903481 
Large: https://than.gs/m/903483 


Each vase comes with three pus options: whitehead, oozing and squirting. A smaller Practice Pimple is included with each to make it easier to calibrate your settings.

Want to squeeze out the perfect print? Here are a few recommendations:

1.	For dual color printing, select your size and pus preferences and assign your extruders. For single color printing, select your size and pus preferences and merge the models together in your slicer.
2.	Select “User Specified” Z Seam Position and enter coordinates for the center of the model. This ensures that the pus starts printing inside the zit and not out in midair.
3.	For dual color printing, you will not need a prime tower; the extra bumps just add to the effect.
4.	The pus geometry is 0.4mm high. I suggest a layer height of 0.2mm.
5.	To get the juiciest pus formation with your dual color prints, lower the speed of your pus extruder and increase the flow rate. The model printing in the video shows the “oozing” pus option printing at 10mm/sec at 300% flow rate.

Thanks for picking this Zit Vase! Is your stomach turning yet?


Zit Vase (Large)

Zit Vase Large.stl

Pop this Zit Vase on your printer, go wash your hands and don’t touch your face. This dual color print is so gross you won’t be able to turn away. Honestly, even reading this description is going to make you queasy. Don’t say I didn’t warn you.

See here for video: https://youtu.be/C6m6XKhYqII 

There are three sizes of Zit Vases:

Small: https://than.gs/m/903479 
Medium: https://than.gs/m/903481 
Large: https://than.gs/m/903483 

Each vase comes with three pus options: whitehead, oozing and squirting. A smaller Practice Pimple is included with each to make it easier to calibrate your settings.

Want to squeeze out the perfect print? Here are a few recommendations:

1.	For dual color printing, select your size and pus preferences and assign your extruders. For single color printing, select your size and pus preferences and merge the models together in your slicer.
2.	Select “User Specified” Z Seam Position and enter coordinates for the center of the model. This ensures that the pus starts printing inside the zit and not out in midair.
3.	For dual color printing, you will not need a prime tower; the extra bumps just add to the effect.
4.	The pus geometry is 0.4mm high. I suggest a layer height of 0.2mm.
5.	To get the juiciest pus formation with your dual color prints, lower the speed of your pus extruder and increase the flow rate. The model printing in the video shows the “oozing” pus option printing at 10mm/sec at 300% flow rate.

Thanks for picking this Zit Vase! Is your stomach turning yet?


Zit Vase (Medium)

Zit Vase Medium.stl

Zit Vase (Small)

Zit Vase Small.stl

Look kid, stop asking what you’re getting for Christmas. Do you know what nosey kids get for Christmas?
 
See here for video: https://youtu.be/s-7BUE-TcME 

Print as orientated with the point up. Ensure that you have good bed adhesion. Thread a knotted string through the hole in the cap and attach the cap to the ornament with a twist.


Nosey Ornament

Look kid, stop asking what you’re getting for Christmas. Do you know what nosey kids get for Christmas?

See here for video: https://youtu.be/s-7BUE-TcME 

Print as orientated with the point up. Ensure that you have good bed adhesion. Thread a knotted string through the hole in the cap and attach the cap to the ornament with a twist.


Cap.stl

I’m giving out gumballs for Halloween this year! 

These creepy gumballs print in two snap-together parts, no supports needed. There is room inside to hold a small (real!) gumball or some candies.

See here for video: https://youtu.be/cExBrRuhn48 

There are three gumball versions, one with “All Teeth” and two versions with missing teeth, “Teeth Missing 1” and “Teeth Missing 2.”

Each version comes with files for either single or dual extruder printers. The dual extruder files let you print the teeth and gums different colours.

To print a gumball, you will need to print the “Gumballs – Back” file and either the “Single Colour” or “Dual Colour” files. If printing the dual colour model you will need to merge the “Gun” and “Teeth” files in your slicer and assign extruders as usual.

Download the set here:
All Teeth: https://than.gs/m/946145 
Missing Teeth 1: https://than.gs/m/946146 
Missing Teeth 2: https://than.gs/m/946147 



Gumballs (Missing Teeth 2)

Gumballs Single Colour - Teeth Missing 2.stl

Gumballs (Missing Teeth 1)

Gumballs Single Colour - Teeth Missing 1.stl

These creepy gumballs print in two snap-together parts, no supports needed. There is room inside to hold a small (real!) gumball or some candies.

See here for video: https://youtu.be/cExBrRuhn48 

There are three gumball versions, one with “All Teeth” and two versions with missing teeth, “Teeth Missing 1” and “Teeth Missing 2.”

Each version comes with files for either single or dual extruder printers. The dual extruder files let you print the teeth and gums different colours.

To print a gumball, you will need to print the “Gumballs – Back” file and either the “Single Colour” or “Dual Colour” files. If printing the dual colour model you will need to merge the “Gun” and “Teeth” files in your slicer and assign extruders as usual.

Download the set here:
All Teeth: https://than.gs/m/946145 
Missing Teeth 1: https://than.gs/m/946146 
Missing Teeth 2: https://than.gs/m/946147 



Gumballs (All Teeth)

Gumballs Single Colour - All Teeth.stl

That time of year is approaching when we need to reassure our loved ones that we do, in fact, love them more than our 3D printers. Including chocolates is a good idea.

See here for video: https://youtu.be/k3vLuc49StI 

Download includes a “Box” and “Lid” files, both print flat on the build plate with no supports. When printing the lid, try doing a filament change near the end to make the text and heart outline stand out!


I Love You More Than My 3D Printer

I Love you More Than My 3D Printer  - Lid.stl

Introducing the Nosey Tissue Box!

STORYTIME: In 2022 I had a video go viral on TikTok where I printed a tissue box with noses all over it. That design was originally made by DaveMakesStuff over on Thangs and is made to hold a small square tissue box. At that time I got permission from him to sell the printed model online and it was a very successful product on my Etsy shop. Fast forward to now, I no longer sell on Etsy, but I know many people love this concept. The number one request was to make it for the larger rectangular tissue boxes and to add a large nose to the lid where you can pull tissues out of the nose. I contacted Dave and got permission to redesign the model, and here it is! I know this will sell well for my Merchant Tier subscribers.

I tested it with the Great Value (Walmart) tissue boxes. It is a tight fit but it does fit if you load it at a slight angle!

3mf files included for Bambulab printers

3D printing settings
Minimum 3D printer build plate size- 256x256mm
10% Gyroid Infill
Box- 207 grams of filament
Nose Lid- 83 grams of filament

Nosey Tissue Box Holder

Nosey Tissue Box .stl

These Jibbitz-inspired poo charms insert into the holes on your Crocs. I don’t know why you’d want to, but there you go 😊

Print a “Poo” and “Insert” file. Glue the “Insert” into the hole at the bottom of the poo and let dry. CA glue works well.

Using your finger, push the hole outward from inside the Croc. This expands the hole allowing for easy insertion without damaging the Croc.


Croc Poo

Poo.stl

Looking for the worst Secret Santa gift? These should do the trick.

Trypophobia is an intense aversion or fear of clusters of small holes, bumps, or patterns, triggering strong feelings of disgust, itching, nausea, or panic.

Download includes five repulsive sizes.


Trypo Trees

Trypo Tree 160.stl

Looking for an April Fool’s Day post? Print and post to social media… be sure to tag (and blame!) all your favourite 3D printer and filament brands. Use hashtag #calibrationfool 

See here for video: https://youtube.com/shorts/ii4bMlS8C14 


Calibration Fool

Looking for an April Fool’s Day post? Print and post to social media… be sure to tag (and blame!) all your favourite 3D printer and filament brands. Use hashtag #calibrationfool 
See here for video: https://youtube.com/shorts/ii4bMlS8C14 


Joke

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Skull Ketchup Cap

Open Heart Chocolate Box

Nose Box

Knot My Problem

Zit Vase (Large)

Nosey Ornament

Gumballs (Missing Teeth 2)

I Love You More Than My 3D Printer