Belt tool holder

Chuck Norris Approved Drill Chuck Key Hook

Chuck Norris Approved Chuck Key Hook.stl

Offset Snap (DS Part A) modified for use on US General tool wall.

Resin Tool Caddy

A caddy for your resin tools, with a grid bottom to allow resin to run through. This model 

caddy.stl

Pliers Holder

Support.stl

Ryobi 6 Gallon Shop Vac to 10 inch One+ Miter Saw Adapter

Festool D36 to OF 1010 Dust Adapter

Adapter to more easily fit the Festool D36 hose to the older OF 1010 with the oval dust fitting.

Print in TPU with a .6mm nozzle and 2 walls.

Ryobi Multi-Tool (TDW025786) allen wrench holder

If you ask me, every tool that requires a tool to adjust it should have a place on the tool to hold the tool. Some Ryobi tools have this feature, but the Multi-tool (brushed -- the brushless may be different) does not.

Three 6mm x 2mm magnets are needed to hold the allen wrench into this holder. Very likely it will just fall out without them.

You can see from the photo how it is hot-melt-glued to the base of the tool, just above the battery. It's never proven to be in the way, so I'm happy with it.

Ryobi Multi-Tool allen wrench holder

Tissue Box Organizer Striped

Box.stl

Compact tools organiser (no supports)

Easy to print fire and forget print with no supports needed, depending on your filament shrinkage and flow, print at 102% for the allan wrench holes

Gutter Downspout Filter Attachment

Downspout Filter v02.03.3mf

Festool Vac to Bosch Sander Hose Adapter

FestoolHoseToBoschSanderROS.3mf

Anycubic Mega Zero 2.0 5015 cooling fan duct

MZ 2.0 Part Cooler 5015.stl

DeWalt Blower Mount.stl

Customizable Door Hook

Door Hook.3mf

Dewalt Battery holder.stl

**SUPPORTS REQUIRED ON SOME PRINTERS**
This is yet another battery holder. it's dewalt this time, the easiest one to design. this one works the same as all the others, line it up against a wall, screw it in (use a drill for pilot holes if you want) and clip in your battery. the reason these battery holders are useful is because if you leave them on the charger it degrades quite quickly and if you leave the connection exposed accidents can happen, stuff could scratch it or dust can interfere with the connection. It also helps when you have more chargers than batteries. 
as always, Happy printing!

Home Improvement

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Belt tool holder

Chuck Norris Approved Drill Chuck Key Hook

Offset Snap (DS Part A) modified for use on US General tool wall.

Resin Tool Caddy

Pliers Holder

Ryobi 6 Gallon Shop Vac to 10 inch One+ Miter Saw Adapter

Festool D36 to OF 1010 Dust Adapter

Ryobi Multi-Tool (TDW025786) allen wrench holder

Tissue Box Organizer Striped

Compact tools organiser (no supports)

Gutter Downspout Filter Attachment

Festool Vac to Bosch Sander Hose Adapter

Anycubic Mega Zero 2.0 5015 cooling fan duct

DeWalt Blower Mount.stl

Customizable Door Hook

Dewalt Battery holder.stl

Directional Nozzle for humidifier

Activated Carbon HEPA Filter

Angle Gauge 35 to 175 degrees

Locking Key Hook