@ Cookie Cutter

Modern Candle Holder with Storage

Semioval Candle Holder With Match Storage.STEP

Carved Stone Candle Holder With Match Storage

Carved Stone Candle Holder With Match Storage.STEP

Hanger with Rotating Label

Dial Hanger Display.stl

Tealight Holder

Tealight_Gate.stl

Hole Saw Tool Caddy: Gridfinity

Hole Saw tool Caddy.step

Turtle_Decorative.stl

Here's a cute little smiley turtle with a decorative shell 🐢

Hope you like it!

**Happy printing!** 😃

_Grab the #exclusive base version of the Turtle on my Patreon page : https://www.patreon.com/RandomizY_
_
**. No support needed
. Size is 10 x 10,7 x 5,8 cm (X,Y,Z)**
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY

⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Shower Hook

This is a shower hook for 1 cm thick glass.  It is very strong so you can print it with only 40% infill for lots of strength. You could probably do less but i haven't tested anything lower.

IKEA Trones shoe storage divider

The [Ikea Trones shoe cabinet](https://www.ikea.com/us/en/p/trones-shoe-storage-cabinet-white-00397307/) stores shoes upright but they fall over if the cabinet isn't full. This divider prevents the shoes (or other tall items) from falling sideways in the cabinet. It clips to the back lip of the drawer and can be positioned anywhere along the drawer length. No adhesive or screws needed, just uses friction to stay in place.

Also included is a file of just the clip portion if you want to test that first. Some filaments may be to brittle or rigid to work.

IKEA Trones show storage divider

Wavy Vase (Tealight Holder)

This is designed to be printed in vase/spiralise mode

There's also a version of this with a light fitting to be used as a lampshade - you can find that here: https://social.thangs.com/m/111471

This was designed using full control gcode - if you'd like to know more, I've written an instructable on creating lampshades and you can check out their own site too
https://www.instructables.com/3D-Printing-Lampshades-With-Full-Control-Gcode/
http://fullcontrolgcode.com/

Printed in Prusament Pistachio PETG

Lack Leg Extension

This is a 6cm leg extension for an IKEA Lack table. I wanted to use a LACK as a frame to an enclosure for my Anycubic Mega Pro 3D printer. The legs on the Lack are about 6cm too short to clear the top of the printer. This simple block has a hole trough the middle to enable you to attach it to the end of hte lack leg using a 2.5 inch deck screw. (because that's what I had around the house)
The screw will be inset 1 cm into the bottom of the leg so that it does not stick out and interfere with the table's balance or scratch any surface it sits on. 

 Miter Gear

Miter bevel set.STEP

Jupiter lamp with base

Picket Fence

fence-piece-v3.stl

candle holder

candle holder   (1.27 cm diametr).stl

Octet Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


BINO 6M sconce, SKU. 28699 by Pikartlights

6B sconce, SKU. 28699 by Pikartlights
Material: aluminum
Made in Ukraine
https://pikartlights.com/shop/sconce/nastinne-bra-spot-6b-art-28699/

6B sconce, SKU. 28699 by Pikartlights

2B sconce, SKU. 28693 by Pikartlights

Spot 2B sconce, SKU. 28693 by Pikartlights
Material: aluminum
Made in Ukraine
https://pikartlights.com/shop/sconce/nastinne-bra-spot-2b-art-28693/

Spot 2B sconce, SKU. 28693 by Pikartlights

IKEA Lack Leg Riser - 130mm

These have been designed to lift a standard IKEA Lack table by 130mm.  There is one screw hole for improved stability which can be hidden at the back of the table.


Originally designed to make sure my modified Ender 3 V2 could fit in the area underneath.

#MakerMay

Sliding Dovetail Lock Box with Key

Sliding Dovetail Lid Box by Product Design Online. (Base file for remixing)

Home & garden

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

@ Cookie Cutter

Modern Candle Holder with Storage

Carved Stone Candle Holder With Match Storage

Hanger with Rotating Label

Tealight Holder

Hole Saw Tool Caddy: Gridfinity

Turtle_Decorative.stl

Shower Hook

IKEA Trones shoe storage divider

Wavy Vase (Tealight Holder)

Lack Leg Extension

Miter Gear

View 49 new models

Picket Fence

candle holder

View 14 new models

BINO 6M sconce, SKU. 28699 by Pikartlights

2B sconce, SKU. 28693 by Pikartlights

IKEA Lack Leg Riser - 130mm

Sliding Dovetail Lock Box with Key