Bambu Lab P1P Modular Dual Aux Fan / Bentobox

Assembly 2.stl

Drawer Organizer

Drawer organizer v3 Full.stl

Festool D36 to OF 1010 Dust Adapter

Adapter to more easily fit the Festool D36 hose to the older OF 1010 with the oval dust fitting.

Print in TPU with a .6mm nozzle and 2 walls.

Electrolux PA91-404DG air purifier control panel tool

To be able to replace the control panel or the engine you will need this too.

Egg Tealight Cover -Spring Bunny

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Sized to fit a typical LED tealight candle. But can be printed larger or smaller for just décor!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Allen Wrench Holder

Creality includes a set of Allen Wrenchs with every 3D Printer. A 4mm, 3mm, 2.5mm, 2mm and 1.5mm allen wrench.

This is a holder for the Allen Wrenchs and It slides into the top aluminum extrusion.

I used some of the T-Handles by garygrano https://www.thingiverse.com/thing:4912677
I included garygrano .stl files for the 4, 3, 2.5, 2 and 1.5 as well in the download.


Egg Tealight Cover -Hearts

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Sized to fit a typical LED tealight candle. But can be printed larger or smaller for just décor!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct


Gridfinity 1x3x3 Leatherman Curl

A 1x3 Gridfinity box to store the Leatherman Curl multitool.
Plenty of space around the tool so it can easily be removed.

Printing
I sliced in Cura using a fast print gridfinity profile based on some reccomendations in the gridfinity subreddit.
using a 0.4mm nozzle in my ender 3
layer height 0.34
initial layer height 0.28
top layers 2
bottom layers 2
infill usually 10%

Not my prettiest print (see the bubbles in the photos, think I set my top and bottom layers too low), but uses little filament, is sturdy enough, and prints quickly

I also made gridfinity box for my Sog Powerpint, also shared here

source files
This was remixed from jdegs filled in gridfinity boxes
https://www.printables.com/model/210548

Taurus Magnum 1000 blender coupler replacement

Replacement of the rubber connector that transfers the motion to the knife. 

Openscad file included, to adopt it to your own use as needed.

Printed with a FLEX filament, I originally planned to glue it in place with contact cement but on first try, it seems to be tight and grippy enough to hold on on its own, for now. I cleaned the aluminum part well.

Only after modelling and printing did I cut off the original rubber and discovered the perforations in the disk, incorporating teeth in the part that grip these perforations would be a solid connection, might add that later if needed.

Ender 3 Revo Cooling Fan Vent

This is an extended cooling fan vent for the Ender 3 or Ender 3 Pro when using the E3D Revo Rapid Change Nozzle. More info here: https://youtu.be/_piJzm66rL8

Pot of Gold Ale Mug #StPatricksRemix

Pot of Gold for St. Patrick's Day

Definitely print with some supports under the model


Pot of Gold

Simple Cord Organizer

Simple small appliance cord organizer that can be stuck onto stand mixers, food processors, blenders or other devices that have cords but no elegant way to store them.

Licensed under a
Creative Commons Attribution-NonCommercial 3.0 Unported License.

support fixation mini-drill

support de fixation mini-perceuse pour cnc

support-interieur-bas.stl

dewalt dust extractor adapter

1-5∕8in thread to 1-3∕4in OD hose.stl

Worksharp 70mm Stone Holder

Body.stl

Geode Lamps (Large Diameter)

Large Geode Tower Tall.stl

Décor Stand-v1

Decor_Stand-v1.stl

Pliers Holder

Support.stl

Gridfinity BLACK+DECKER Multibit Screwdriver

This should fit similar multibit screwdrivers.

This one was specifically designed for the BDHT68001 6-in 1 Black+Decker screwdriver.

Home & garden

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bambu Lab P1P Modular Dual Aux Fan / Bentobox

Drawer Organizer

Festool D36 to OF 1010 Dust Adapter

Electrolux PA91-404DG air purifier control panel tool

Egg Tealight Cover -Spring Bunny

Allen Wrench Holder

Egg Tealight Cover -Hearts

Gridfinity 1x3x3 Leatherman Curl

Taurus Magnum 1000 blender coupler replacement

Ender 3 Revo Cooling Fan Vent

Pot of Gold Ale Mug #StPatricksRemix

Simple Cord Organizer

support fixation mini-drill

dewalt dust extractor adapter

Worksharp 70mm Stone Holder

View 10 new models

View 17 new models

Pliers Holder

Gridfinity BLACK+DECKER Multibit Screwdriver

Gridfinity Lenox Multibit Screwdriver