Creepy Leather Pumpkin

Halloween 1978 style Pumpkin

HalloweenMoviePumpkin-Body.stl

Swirling Tree Ornament, Christmas Decor by Slimprint 

**What could be more fun than 3D printing your own Christmas decorations?**

This Additive Star ornament is an easy-to-print and unique model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright with just 10% infill and a 8mm brim.

Size: 10 x 3.1 x 10 cm
Weight: 26 grams
Print time: 2h 7m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.4 mm layer thickness / width
2 walls
35 – 40mm/s print speed
10% cubic infill 
No supports
8 mm brim for improved bed adhesion

SWT1, Swirling Tree Ornament.stl

Festive Christmas Ornaments 4

spherical_snowflake_5.stl

Large Spiral Christmas Tree Topper

Spiral Christmas Tree Topper

Spooky Reindeer Ornament

Spooky Reindeer Ornament ..stl

Frosty Gnome Ornament

ornament_frosty_gnome.stl

Mini Christmas Ball - Medium Lattice

Mini Christmas Ball Medium Lattice.stl

Christmas Ornament Solid Slices

4.5 Inch Solid Ornament Slices.3mf

Hinged Christmas Tree (Print in Place).stl

**RECOMMENDED PRINT SETTINGS**
Brim or Raft: No
Supports: No
Orientation: Standing up
Layer Height: 0.1mm
Infill: 40%
Speed: 60mm/s
Nozzle Size: 0.2mm
Material: PLA or ABS
Green PLA (seen in pictures): https://geni.us/greenPLA


**Learn Fusion 360:** https://ProductDesignOnline.com

**PDO YouTube:** https://www.youtube.com/productdesignonline

This model was created by Kevin Kennedy (Product Design Online) and is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

Pumpkin Horror Ghost

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

----------------------------------------------------------

Pumpkin Horror Ghost

This ghost only comes out on halloween! These ghost come out and hunt the people who have carved them and sent them into the after life. This ghost is even more dangerous than the Werewolf ghost.

Do not cross its path unless you want to get carved. 

This ghost is pretty creepy. 

Print it with the [pedestal ](https://thangs.com/mythangs/file/422307) to keep it up right.

----------------------------------------------------------

If print some of my models please tag me on social media.

www.Twitter.com/carmelo_nazario
www.instagram.com/thecreatorx3d

If you want to help a brother out please consider signing up to my patreon.

www.patreon.com/thecreatorx3d

KEEP ON PRINTING!!

Mask Display Stand

MaskStandProject.3mf

Christmas Tree Star Topper

Star_BodyHalf.stl

Double Diamond Christmas Ball

###About the Design
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

###Not To Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

###Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

###Print Time
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Ornamental Bauble 2023 (#1)

Ornamental Bauble 2023_#1.stl

Baby Yoda Christmas Tree Decoration

This is a Baby Yoda Christmas Tree Ornament. 
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Baby Yoda Christmas Tree Ornament

Merry Christmas Tree

You can scale it up or down , you can check more of my designs on my instagram https://www.instagram.com/emx_performance/

Don't wanna be a Scary Ghost for Halloween - Low Material

Don't wanna be a Scary Ghost for Halloween - Low Material

You can print with 2-3 perimeters, and it will be solid!



christmas tree dice tower holder

christmas tree dice tower holder colored.3mf

Santa Claus Gnome - Christmas Wall Art

gnome2.stl

Holidays & Seasonal Events

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Creepy Leather Pumpkin

Halloween 1978 style Pumpkin

Swirling Tree Ornament, Christmas Decor by Slimprint

Festive Christmas Ornaments 4

Large Spiral Christmas Tree Topper

Spooky Reindeer Ornament

Frosty Gnome Ornament

Mini Christmas Ball - Medium Lattice

Christmas Ornament Solid Slices

Hinged Christmas Tree (Print in Place).stl

Pumpkin Horror Ghost

Mask Display Stand

Christmas Tree Star Topper

Double Diamond Christmas Ball

Ornamental Bauble 2023 (#1)

Baby Yoda Christmas Tree Decoration

Merry Christmas Tree

Don't wanna be a Scary Ghost for Halloween - Low Material

christmas tree dice tower holder

Santa Claus Gnome - Christmas Wall Art