Pig Christmas Ornament

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

merry christmas sign xmas decor

merry christmas-1.stl

Snowman - Cookie Cutter with Stamp

Snowman - Cookie Cutter.stl

Solid Christmas Tree Slices

4.5 Inch Solid Christmas Tree Slices.3mf

Halloween door decoration 10

Halloween door decoration.
Join my membership plan and get commercial to sell the prints of all my designs.

Christmas Decoration Style 6

Decoration Style 6 Type 1_STL.stl

Stocking Stuffers

Bases - stockings.3mf

Death Star Halloween Candy Bucket

DeathStar Halloween Candy Bucket.stl

Halloween door decoration 6

Bell - Cookie Cutter with Stamp

Bell - Cookie Cutter.stl

Twist Close Egg

DISPLAY ONLY.stl

Chicken Christmas Ornament

This is the small Chicken remixed into a Christmas Ornament

Halloween cookie cutters

Christmas bowl

model302.stl

Viral Scream Ghostface Holiday, Halloween Decoration

SCREAM DECOR.3mf

M3D Free Holiday Bundle (Personal-Use)

M3D-ReindeerBabyDuck.stl

Swoop 3 Christmas Bulb 2024

bulb swoop 3 simplified v2.stl

Christmas Tree Desktop Ornament

Tree2022-Tree.stl

Solid Christmas Tree Slices with Star! ⭐

4.5 Inch Solid Christmas Tree with Star.3mf

Holidays & Seasonal Events

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pig Christmas Ornament

Yeah, Another christmas Ball

merry christmas sign xmas decor

Snowman - Cookie Cutter with Stamp

Solid Christmas Tree Slices

Halloween door decoration 10

Christmas Decoration Style 6

Stocking Stuffers

Death Star Halloween Candy Bucket

Halloween door decoration 6

Bell - Cookie Cutter with Stamp

Twist Close Egg

Chicken Christmas Ornament

Halloween cookie cutters

Christmas bowl

Viral Scream Ghostface Holiday, Halloween Decoration

M3D Free Holiday Bundle (Personal-Use)

Swoop 3 Christmas Bulb 2024

Christmas Tree Desktop Ornament

Solid Christmas Tree Slices with Star! ⭐