Christmas Card Gift with Snap out Ornament

little christmas hug_1.stl

Annoying Gift Card Bundle - Merry Christmas, Grinch

ANNOYING CARD BOXES GENERIC.3mf

Boa Constrictor Straw Topper

A snake straw topper for all tour straw topping needs!

No supports needed, print flat on buildplate 

Sugar Skull Turtle

Teal Cat Creative Turtle.stl

3 Part Road Bike Stand

ROAD STAND-BASE.stl

SRAM AXS Charger Wall Mount or Multiboard

SRAM AXS Charger Wall Mount or Multiboard.stl

Mandala flowers

3D Mandala magnolia flowers_2.stl

KNOMI Christmas Ornament Smirking Face

KNOMI Christmas Ornament Smirking Face Frikarte3D.stl

Gunpla Runner Rack Stands - Regular and Mini

Gunpla Large Stand - v2 - Plain.stl

Winged Kaleidoscope Christmas Ball

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 6.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height or even adding infill. Infill is counter-intuitive, but it means the hot end moves to a different part of the layer, giving the outside a chance to cool. 

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm
* Alternate Extra Layer: Yes

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
I would recommend adding 100% infill to the loop at the top of the ornament to make the loop stronger, but I wouldn't add infill anywhere else. It just adds weight.

To add infill (or extra walls, tops or bottoms) to just one area of an object in Cura:
1. Add a support blocker
2. Select the support blocker and scale and position it where you want the added infill
3. Select “Per Model Settings” then select “Modify Settings for Overlaps”
4. Select “Select Settings” and check “Infill Density” then select “Close”
5. Enter the amount of infill you want

*Speed*
* Outer Wall: 20 mm/sec
* Inner Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for bed adhesion.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

I also added a custom cylindrical support to either side where the bottom ledges intersect. This not only helps with printing the point of intersection, it help prevent the model from wobbling or coming loose from the print plate.

Aquarium Water Test Tube Rack

Test Tube Rack.3mf

Ugly Christmas Sweater Can Koozy, Ugly Christmas Can Mug (hard print)

Ugly Can Cup x2.3mf

Twisted Vase

Just a vase with a cool twisty pattern.

Print Settings:
DO NOT use vase mode
.1 - .2 mm layerheight
no supports
the model is scalable to any size you want to print it at

Creepy Leather Pumpkin

Christmas Mega Bundle Clay Cutter for Polymer Clay | Digital STL File | Clay Tools

Christmas snowman -35mm sharp.stl

Easter Egg (3)

Easter Egg (3)_Top.stl

Multi-Material Road Bike Stand

ROAD STAND-MULTI-BASE_23.stl

SPIDER TEALIGHTS FOR HALLOWEEN

SPIDER TEALIGHT.stl

The Batman Christmas Ornament

This Ornament is based on the Batman Logo.

floss_bobbin_labeled

A 3D printable bobbin for storing and organizing your floss.

The thickness if modifiable with the thickness parameter in the customizer so you can play with the flexibility of the finished product.

You can also add a label to the part that will print in the top right of the bobbin raised 0.4mm for indicating the floss number. It is positioned to ensure 5 characters will fit so you can label you B5200, BLANC, and White.

Hobbies & Leisure

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Card Gift with Snap out Ornament

Annoying Gift Card Bundle - Merry Christmas, Grinch

Boa Constrictor Straw Topper

Sugar Skull Turtle

3 Part Road Bike Stand

SRAM AXS Charger Wall Mount or Multiboard

Mandala flowers

KNOMI Christmas Ornament Smirking Face

Gunpla Runner Rack Stands - Regular and Mini

Winged Kaleidoscope Christmas Ball

Aquarium Water Test Tube Rack

Ugly Christmas Sweater Can Koozy, Ugly Christmas Can Mug (hard print)

Twisted Vase

Creepy Leather Pumpkin

Christmas Mega Bundle Clay Cutter for Polymer Clay | Digital STL File | Clay Tools

Easter Egg (3)

Multi-Material Road Bike Stand

SPIDER TEALIGHTS FOR HALLOWEEN

The Batman Christmas Ornament

floss_bobbin_labeled