Adornos del Dia del Padre #PartyThangs

El Mejor Papa del Mundo 3.stl

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

jet fan blade.stl

jet fan for RC motor diameter of the fan is 105mm mounting hole is 5mm make sure your motor can handle current .

Easter Bunny Aiah

BunnyAiah.stl

4-Inch Drone Build (20 x 20 Stack)

Bottom (9 x 9 Motor mount).STL

SPEED BOAT | Scalable

SpeedBoat.stl

Valentine's Day Springie 2024

Wing Right.stl

Angry Christmas Light Bulb

Angry Christmas Light Bulb.stl

Happy Halloween - ghost.stl

Happy Halloween Decoration 

It's a super-easy-to-print design that doesn't require any backing. Prints flat.

**Print settings** : 
- 10-15% infill
- no support
- PLA Black from Ariane Plast

All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)

Bat Skull - Low Poly

The Bat Skull in its minimalist low poly version is a mesmerizing fusion of darkness and geometry.

Sharp angles and haunting shadows bring an air of intrigue, while the simplicity of the design draws you in.

His spooky essence will add a touch of spine-chilling charm to your space.

It's the perfect blend of spooky and stylish, ready to cast its spell on anyone who gazes upon it! 🦇💀
⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #randomizy when sharing your video)_**

⸻⸻⸻⸻⸻⸻⸻⸻

𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_** https://than.gs/u/296962?plans=true

⸻⸻⸻⸻⸻⸻⸻⸻
**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

Bat Skull_Low Poly.stl

Christmas Gonk.stl

Festive Gonk droid, perfect for hanging from the Christmas tree 🎄 

Black_House_Spider

Here is a spider for spooky Halloween. Have fun scaring your brothers, Sisters, Mom, or Dad!!!

Low_Poly_Dog

Low poly dog created by by AndrewSink from Thingiverse. All credit goes to him.

License: CC-A-SA

Bunny Paper Folding Craft

Bunny Paper.3mf

Flexi Frog with Antlers

Bellamys3DP - Frog Antlers.stl

Collapsing Christmas Tree Gift Box || Christmas

Collapsing Christmas Tree Gift Box V1.1 - Tree Box.stl

Shock for RC Car 80mm

Adjustable shock for RC Car.
Additional parts:
- M3 screw 35mm
- Compression Spring 0.9mm wire (50mm or 60mm length), 12mm OD
- Super glue

You can use Mesh Tools -> Split Model into parts (add-on in Cura) to separate parts and use better positioning.

After print, clean excess filament extrusion from threads before put adjustment ring in shock body.
If it not fit, try printing only adjustment ring at 102% X Y.

I'm using 0.9mm wire springs 50mm length 12mm O.D.
For 1.1mm wire or more, choose 13mm O.D.
Note: 1.4mm (or more) spring wire diameter is too strong for use in RC.

Hope this can be usefull for you too.

Peg Anything // Battery Holder for GH6, GH5, Sony, DMW-BLF19E, NP-F550, RP-BC009, NP-F330 F550 F570

Keep your camera/lighting batteries organized with these custom pegboard mounts for compatible Panasonic and Sony batteries.

Compatible Battery Models:

Panasonic Dmw-BLF19 and Panasonic Lumix DC-S5, DC-S5 II, DC-S5 IIX, GH5 II, GH6, S5II, S5IIX, S5M2, S5M2X, GH5M2

Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917

3 lane 350mm Straight Track.3mf

This is a 350mm long straight section of track compatible with Tamiya mini 4wd. you will need a 400mm x 400m printer for this file.

Kayak Paddle Clip.stl

Kayak paddle clip from Perception Eclipse 17

Hobbies & Leisure

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Adornos del Dia del Padre #PartyThangs

ZigZag Christmas Ornament

jet fan blade.stl

Easter Bunny Aiah

4-Inch Drone Build (20 x 20 Stack)

SPEED BOAT | Scalable

Valentine's Day Springie 2024

Angry Christmas Light Bulb

Happy Halloween - ghost.stl

Bat Skull - Low Poly

Christmas Gonk.stl

Black_House_Spider

Low_Poly_Dog

Bunny Paper Folding Craft

Flexi Frog with Antlers

Collapsing Christmas Tree Gift Box || Christmas

Shock for RC Car 80mm

Peg Anything // Battery Holder for GH6, GH5, Sony, DMW-BLF19E, NP-F550, RP-BC009, NP-F330 F550 F570

3 lane 350mm Straight Track.3mf

Kayak Paddle Clip.stl