Crisalida | Lamp

OLAS.stl

Vortice | Vase

Vase model Vórtice.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (vortice.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and purple matte PLA)

Anima | Vase

Vase model Ánima.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (anima.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte black PLA)

Dama | Vase

Vase model Dama.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and PLA matte lady)

Perla | Vase

Vase model Perla.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (perla.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of around 0.2 mm
PLA matt white or light grey)

Starry Candle

Starry Candle is a minimalist candle holder that plays with light and shadow to reflect the shape of a star on the table.

Use this Christmas decoration to set the mood with its lights, as a centrepiece for your Christmas dinners or as a home decoration.

The ideal candles to achieve the maximum shadow effect are the elongated ones, which can be nailed directly to the base, as it has a small spike, or use the tube that is attached to the base to insert the candle. You can also use small candles to achieve a different effect, which are nailed directly to the base.

**3D PRINTING PARAMETERS**
The following configurations are recommended for printing:

No need to use support
Filling of 20%.
Layer height 0.15 mm or less
Bottom layers: 5
Top layers: 3
Wall line count: 7
Recommended to print in matt filament. You can print the candle holder and support tube in different colours to create different combinations.

Uvas | Vase

Vase model Uvas.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (uvas.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and purple matte PLA)

Totem | Table

TABLEBASE.stl

Redvelvet | Vase

Red Velvet vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (redvelvet.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and red matte PLA)

Girasol | Vase

Sunflower vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (girasol.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

Materia negra | Lamp

CUBE.stl

line art -3 .stl

USB Brilliant Diamond Organizer

This brilliant Usb holder will stash 4 of your usb sticks or dongles. The inside of the diamond has also been cut to provide a small storage location

let me know if you want some kind of custom decoration or model

https://b-render.itch.io/

CC BY-NC
Created By B._.render

Coaster Ornament v1.2

Hexagonal Based Wall Wire Beautifier

I'm not drilling into my walls or crawling through the attic to run more cat5 so I made these to at least make the visible cabling look good. PCB style, 45 degree cat5 wall hanger. 3 channels, hexagon footprint for mad cyberpunk style points. I used 3m double sided adhesive foam to mount these.

HOME

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Crisalida | Lamp

Vortice | Vase

Anima | Vase

Dama | Vase

Perla | Vase

Starry Candle

Uvas | Vase

Totem | Table

Redvelvet | Vase

Girasol | Vase

Materia negra | Lamp

line art -3 .stl

USB Brilliant Diamond Organizer

Coaster Ornament v1.2

Hexagonal Based Wall Wire Beautifier

Simple Elegance - Coasters

Headmy Tulip - All Catcher

Roundy Desk Organizer

Butterfly Blossom Vase

Pivot Lamp