Hinged Gift Box (print in place)  *print upside down for best print*

Print in Place, gift box w/ wrapping & hinges.

ENjoy!

=]

_**you may have an easier time printing this upside down, with the bow tie in upright position as opposed to how it is currently being displayed.**_

Giftbox.stl

Lil' Kimono Boys | Holiday Ornament

Boys.stl

TURKEY.stl

Turkey mostly made from geometric shapes.

Happy Thanksgiving!

Gobble Gobble!

:3

Gingerbread Man 🍪

This is a cool prop of a gingerbread man. I would appreciate some feedback while you are here because it would be incredibly helpful. Let's try to reach 200 downloads by the end of 2022.

Lil' Kimono Girls | Holiday Ornament

GirlsLoop.stl

Lil' Luck Cat | Holiday Ornament

LuckCatLoop.stl

Twisted Tree Pencil Holder

Tree Vase 01.STEP

Classic Jack-O Pumpkin Jar

Jack-O-Lantern [BODY].stl

Christmas Bells 

You can scale it up or down , you can check more of my designs on my instagram https://www.instagram.com/emx_performance/

Christmas Pocket Emptier - Centerpiece 180x180

Simple design, Holiday related, Christmas container/pocket emptier/Table centerpiece.
Dimensions: 180Wx180Lx37.5H mm 
With Red/Green or Gold coloured PLA, with a Candle can be really a gamechanger on your Christmas Table.
Hope you enjoy it.


Rockachu.stl

Pickachu? The Rock?

Why not Both?!

:D

ENjoy!

Articulated Print-In-Place Christmas Nutcracker v1

Nutcracker TOP.stl

SCOREconnect | Stocking Stuffer

Board.stl

Holiday Tree Display Stand | Modular

StarTopper.stl

Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

Star Ornament

A Christmas Ornament for a Christmas Tree.

Turkey Fan Toy | Print-In-Place

Fan.stl

Goldee The Baby Dragon

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
**Patreon Sculpt, now FREE for you!**
_Sculpt by @ChelsC423_

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Ginger The Baby Dragon

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
Patreon Sculpt, now FREE for you!
**Sculpt by @ChelsC423**

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

HOLIDAY

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hinged Gift Box (print in place) print upside down for best print

Lil' Kimono Boys | Holiday Ornament

TURKEY.stl

Gingerbread Man 🍪

Lil' Kimono Girls | Holiday Ornament

Lil' Luck Cat | Holiday Ornament

Twisted Tree Pencil Holder

Classic Jack-O Pumpkin Jar

Christmas Bells

Christmas Pocket Emptier - Centerpiece 180x180

Rockachu.stl

Articulated Print-In-Place Christmas Nutcracker v1

SCOREconnect | Stocking Stuffer

Holiday Tree Display Stand | Modular

Star Christmas Tree Ornament

View 31 new models

Turkey Fan Toy | Print-In-Place

Goldee The Baby Dragon

Ginger The Baby Dragon

Turkey Legs