Christmas Flower pointsettia ornament xmas wall decor

pointsettia.stl

BUNDLE PACK OF 4 Halloween Earrings for Cosplay Costumes

skull earrings.stl

Mini Zombie Candy Bowl

Mini Zombie Candy Bowl.stl

Crochet Penguin 2

Crochet Penguin 2.stl

Christmas Tree Organiser

Christmas Tree Organiser Part 3 Style 2.STEP

Mini Christmas Dragon Keychain

MiniMonster#1SANTAhatKeychain.stl

IRISH CELTIC CATHOLIC CROSS - EASTER - 2 COLOR, MMU

CELTIC CROSS ALT COLOR WITH HOLE.stl

Kaleidoscope Christmas Ball 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled it to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.

Snowflake - Cookie Cutter with Stamp

Snowflake - Cookie Cutter.stl

Stitch Santa Skull & Ornament (Pre Supported)

Stitch_Santa_Skull.stl

Snow Flake 1

STL-Snow Flake - 1.stl

Santa Axe Fridge Magnet

Santa Axe Magnet.stl

Holiday Nunchaku – Chained Kit (No AMS, No Support, No Glue)

Lava Red.stl

Mummy Bowl (Pre-Supported)

bowl.stl

Whimsical Christmas Tree

xmas_treev0.stl

Snowflake 4

STL-Snow Flake - 4.stl

Ghost Kitten by Mesh Mayhem

Ghost Kitten by Mesh Mayhem.3mf

Berry Merry Cake Container - Jewelry Box and Gift Holder - Day 12/12 Holiday Desserts

HOLIDAY

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Flower pointsettia ornament xmas wall decor

BUNDLE PACK OF 4 Halloween Earrings for Cosplay Costumes

Mini Zombie Candy Bowl

Crochet Penguin 2

Christmas Tree Organiser

Mini Christmas Dragon Keychain

IRISH CELTIC CATHOLIC CROSS - EASTER - 2 COLOR, MMU

Kaleidoscope Christmas Ball 2

Snowflake - Cookie Cutter with Stamp

Stitch Santa Skull & Ornament (Pre Supported)

Snow Flake 1

Santa Axe Fridge Magnet

Holiday Nunchaku – Chained Kit (No AMS, No Support, No Glue)

Mummy Bowl (Pre-Supported)

Whimsical Christmas Tree

Snowflake 4

Ghost Kitten by Mesh Mayhem

Berry Merry Cake Container - Jewelry Box and Gift Holder - Day 12/12 Holiday Desserts

Santa Duck

Giant Snowman - Improved Bolts