Every Harry Potter fan needs a Harry Potter themed bookmark or two…or three 😂 Please note: these bookmarks require mesh fabric to be inserted during the print. I recommend using polyester mesh fabric (often called mosquito mesh fabric - more details below👇🏼).

Dimensions of Harry Potter Bookmark: 8 in x 1 ¾ in x 1.6mm thick
Dimensions of 9 ¾ Bookmark: 7 in x 1 ½ in x 1.6mm thick
Dimensions of Dobby Sock BookmarK: 7in x 2 in x 1.6mm thick

**How to Print:**
PLA works great
Layer Height 0.2mm
Infill 15%
No supports needed

3mf Print Profile for Harry Potter Bookmark: 4 colors, print pauses at Layer 6 (layer height 0.6mm) to insert mesh fabric; flushing volumes for filament change set at 0.6

3mf Print Profile for 9 ¾ Bookmark: 3 colors; print pauses at Layer 6 (layer height 0.6mm) to insert mesh fabric; flushing volumes for filament change set at 0.6

3mf Print Profile for Dobby Sock): 1 color, print pauses at Layer 6 (layer height 0.6mm) to insert mesh fabric

Items you will need:
Polyester Mesh Fabric (Mosquito Netting)

A note about fabric: I have tried several different types of fabric. Polyester Mesh fabric (also called Mosquito Netting) is my favorite. Here is a link for where to find it on Amazon: https://amzn.to/4cb77Od

I have found that mesh made from PE (Polyethylene) tears very easily. Tulle prints well but is not very durable and also tears very easily. Nylon mesh will also work but it is thicker for the print head to print over and I think if you have never printed with fabric before you will feel more comfortable using Polyester Mesh instead.

**How to print the bookmarks:** 
I recommend slowing down the print (to 50% silent mode) initially to get a really clean first layer. I have inserted a pause print at layer 6 (layer height 0.6mm). When the printer pauses, lay a piece of mesh (that has been cut about an inch wider in diameter than the print) over the print. I like to secure the fabric down with blue painters tape (you can also use magnets but I prefer tape). Resume the print at a slower speed (50% silent mode) for a layer or two and then you can increase the speed back up to 100%. After the Harry Potter bookmark is done printing, you can cut the fabric (in between the squares of the bottom gold section) vertically to make it look more like tassels:)

Note: These bookmarks will each fit on the print bed of an Bambu A1 Mini but there is not as much room around the edges to secure the fabric with tape. Although it's a tighter fit it can still be done 💪 you will just have to trim the fabric a little smaller and take a little more time to tape and secure it in place:)

Another note: I tried several different “skin” colored filaments (light pinks, peachy pinks, off-whites, etc.). The one I have linked in the Amazon link for my favorite for Harry. (Some of the other ones I tried made his look more angry (red'ish), or ill (gray'ish) 😂)

**Commercial Use**
My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, you can sign up for my Thangs club. 

**Support**
If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much!

Harry Potter Themed Bookmark Set (requires mesh fabric)

Harry Potter Bookmark.3mf

Harry Bookmark.stl

🪄🪄🪄 **Free for a Limited time**🪄🪄🪄

✨ A Customizable Wand That Actually Fires Spells (Rubber Bands)! ✨
Step into the world of magic and adventure with the Rubber Band Wand, a Harry Potter, Dungeons & Dragons, and fantasy inspired 3D printed wand that shoots rubber bands! Designed for cosplayers, role-players, and wizard duels, this modular wand lets you mix and match different styles to create your perfect spell-casting wand.

Key Features:
🪄 Modular Mix-and-Match Design – Build your own custom wand by swapping different wand tips, triggers, handles, and pommels.
🎯 Functional Rubber Band Shooter – Load size 64 or 33 rubber bands, pull back, and fire with the trigger mechanism!
🖨️ Designed for Multicolor 3D Printing – Compatible with BambuLab MMU printers or single-color prints and hand paint.
🎨 Perfect for Cosplay, D&D, LARPing & Wizard Duels – Fun for kids, adults, and magical role-players.
⚡ Accessories Included! – Comes with a target stand and printable target sheets for wizard training.

Printing Tips:
🔹Print with a high wall count for strength (0.4 mm nozzle > 6 walls)
🔹Bambu Slicer File is Named "GEARXYZ RBG Wand UniqueHorn BambuStudio.3mf"
🔹Use tree supports for the wand tip
🔹Looks good Single color, Need AMS for Multicolor

📜 Want to Sell This?
🔹 Subscribe to the GEARXYZ Commercial License.
🔹 Get access to wand styles & new releases.
🔹 Print and sell legally while keeping 100% of the profits!!!

Rubber Band Wand (Unique Horn)

GEARXYZ RBG Wand UniqueHorn Full Wand.3mf

**Harry Potter - Complete Character Collection**
18 print-ready STL files from the beloved wizarding world
What's Included:

Golden Trio: Harry Potter, Hermione Granger, Ron Weasley + Dobby
Students: Neville Longbottom, Draco Malfoy, Luna Lovegood, Ginny Weasley
Professors: Dumbledore, Snape, McGonagall, Lupin, Mad-Eye Moody, Umbridge, Hagrid, Sirius Black
Villains: Voldemort, Bellatrix Lestrange

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Potterheads, wizarding world collectors, and 3D printing enthusiasts!**

Harry Potter STL Files - Harry Hermione Ron - Wizarding World 3D Print Models

Character_7_Hagrid.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 50 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

How to make
**(1)** Please print the following files: "owl_primary_color.stl", "owl_secondary_color.stl", "owl_beak_legs_color.stl"I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!


HARRY POTTER

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Harry Potter Themed Bookmark Set (requires mesh fabric)

Rubber Band Wand (Unique Horn)

Harry Potter STL Files - Harry Hermione Ron - Wizarding World 3D Print Models

Low Poly Owl Magnet Puzzle (No supports, no AMS)