Gridfinity Xacto Knife Tray Insert (1 slot)

Xacto Knife tray insert for Gridfinity with 1 slot.

Rather than dedicating a 1x3 (gridfinity units) exclusively as an Xacto knife tray, give this insert a try.
The insert fits inside an 1x3, or can be used stand alone on your work surface.

Gridfinity Windowed Bins - Rails

3_Compart.stl

Gridfinity Pegboard Frame 4x1

A pegboard adapter for a 4x1 gridfinity frame.

#gridfinity

Gridfinity 3 Popsocket holder

Gorilla Super Glue GRIDFINITY Tall.stl

Remix of GRIDFINITY Gorilla Glue Holder by bigbrisco to make it taller so that it holds the bottles better when they get low on glue.

Gorilla Super Glue GRIDFINITY Tall v2.stl

Volcano Nozzle x9, Gridfinity 1x1


This will fit 9 Volcano nozzles. The heads sit above the platform for better grabability, but below the upper lip so you can stack blocks on top. 

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

Parametric source file [https://a360.co/3KZAXs6](url)


**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Volcano Nozzle x9, Gridfinity 1x1x.5.stl

Gridfinity Pinecil & Tip Holder with some tolerance.stl

This will hold your Pinecil v2 and 5 TS100 Tips in a 1x1 #gridfinity box.

The design is remixed from the work by Waschtl [https://www.printables.com/social/308935-waschtl](url) found here 
[https://www.printables.com/model/266923-gridfinity-pinecil-tip-holder/comments](url)

The tolerances were just a bit too tight for me and it took too much force/filing to get things to fit without modification.

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

Parametric source file:
[https://a360.co/3KZAXs6](url)

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Caliper Holder, Husky 6in, Gridfinity 1x2

Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style.

Remixed from Zack Freedman's design here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Caliper%20Holder-62216 
It probably wasn't necessary, but I made a few dimensions ever so slightly wider.

#Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file:
https://a360.co/3KZAXs6

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

Gridfinity Tips!

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Caliper Holder, Husky 6in

Gridfinity Walkie talky holder

Gridfinity Walkie Talky Holder with AAA holders 

Praise be unto zack

Split Gridfinity Box

Split Box.stl

Rightest Glucose Finger pricker

A gridfinity 1 x 1 holder for the Glucose finger pricker thing that comes with the Rightest Glucose meters.

Gridfinity CR123 battery holder 8 qty

Holds 8 qty CR123 batteries and takes up two spaces on the grid.

Gridfinity Dial Test Indicator Holder

A gridfinity dial test indicator holder.

Remixed from https://www.thingiverse.com/thing:2175277 and https://github.com/kennetek/gridfinity-rebuilt-openscad

License: CC BY-NC 4.0

Gridfinity Dial Test Indicator.stl

Gridfinity Dial Indicator Holder

Gridfinity Dial Indicator.stl

Gridfinitiy Pinecil Holder

Gridfinity Pinecil horizontal holder, see my other models for a stackable tip holder

Gridfinity Heat Set Insert Tips

Storage bin for heat insert tips:
https://amzn.to/3xYm5FT

Gridfinity - Heat Set Insert Tips

Gridfintiy 9v batt holder 1x2

4x 9v battery holder for the Gridfinty system

all glory to zack

Gridfinity Bottle Lid (Correct Threading)

A lid for the Gridfinity bottle with threading that matches the bottle for a better fit than the existing model.

I recommend printing with 0.4mm line width for best quality threads.

Gridfinity | Lift'n'Carry Trays

Body.stl

Gridfinity Wera mini screwdriver holder

Gridfinity Wera mini screwdriver holder

made from:
https://www.printables.com/model/108848-wera-screwdriver-organizer/files

Gridfinity

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Xacto Knife Tray Insert (1 slot)

Gridfinity Windowed Bins - Rails

Gridfinity Pegboard Frame 4x1

View 12 new models

Gorilla Super Glue GRIDFINITY Tall.stl

Volcano Nozzle x9, Gridfinity 1x1

Gridfinity Pinecil & Tip Holder with some tolerance.stl

Caliper Holder, Husky 6in, Gridfinity 1x2

Gridfinity Walkie talky holder

Split Gridfinity Box

Rightest Glucose Finger pricker

Gridfinity CR123 battery holder 8 qty

Gridfinity Dial Test Indicator Holder

Gridfinity Dial Indicator Holder

Gridfinitiy Pinecil Holder

Gridfinity Heat Set Insert Tips

Gridfintiy 9v batt holder 1x2

Gridfinity Bottle Lid (Correct Threading)

View 11 new models

Gridfinity Wera mini screwdriver holder