Anycubic 3X1 Sidecar, Gridfinity

Anycubic 4X1 Sidecar, Gridfinity

Anycubic 2X1 Sidecar, Gridfinity

Gridfinity weld-on 16 5oz. glue holder

glue-base.3mf

Gridfinity Noga Mavast Deburring Tool

debur-tool-base.3mf

gridfinity deodorant storage 4x1

very functional but unfortunate looking 3d scan to storage  cutout of my degree deodorant stick. 4x1 bin.

nail clipper gridfinity bin

A bin I made for my bathroom gridfinity project to hold my nail clippers. stackable in one orientation easily grabbable in the other. magnet ready 2x1 bin. these are the nail clippers: https://a.co/d/0gAR0jk

Gridfinity BLACK+DECKER Multibit Screwdriver

This should fit similar multibit screwdrivers.

This one was specifically designed for the BDHT68001 6-in 1 Black+Decker screwdriver.

BLACK+DECKER Multibit Screwdriver

Pegboard-to-Gridfinity_2x4.stl

A 2x4 Gridfinity base that attaches to pegboard using Sy's Peglock system.
https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system


Spiralized Gridfinity Bins

Spiralized Gridfinity Bin Small Nozzle.stl

Inverted Gorilla Glue Stand (Gridfinity)

With a need to store and organize my partially used bottles of Gorilla superglue, I thought it a perfect opportunity to make a contribution to [ZackFreedman](https://thangs.com/designer/ZackFreedman)'s Gridfinity system.

This model is built on Zack's "Divider Box 2x1x2 1"  from his[ Gridfinity Divider Bins](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721).

Gridfinity - CEC Corp Superglue - 120g.stl

Angled holder for CEC Corp Superglue 120g bottle. I wanted an angled version so they could fit in the larger ALEX drawers from Ikea. 

Gridfinity DMM Probe Holster

I made this to complement the Gridfinity Aneng DMM [holder](https://thangs.com/designer/markersniffen/3d-model/Gridfinity%20Multimeter%20holder-184802)

The four holes are there to hold either bare-ended probes or hooks. The probes do poke out the back so you won't be able to put another gridfinity widget behind it.

The bottom has cavities to glue in US (or Canadian) quarters to add some weight, lest the probes tip it over. If you use magnets with your gridfinity boxes, you probably don't need it.

Celtic Knot Gridfinity Bin 2x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard: https://social.thangs.com/m/733962 
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Gundam Marker Gridfinity Bins

6x 14.5mm Gundam Marker 2x1x9.stl

Gridfinity Stackable Lids

GF_stackable_lid_4x2.stl

Gridfinity Photo Frame

5x7 Picture Frame Template for Thangs official Remix Challenge.

Prints in place (single piece), with nail holes on the back.

5x7 Picture Frame Template.stl

Gridfinity Wowstick.stl

Simple block to hold a wowstick and 3 tubes of bits. Holes are 17mm. This was quick and dirty.  May refine a bit, may not. :)

Chain Link Gridfinity Bin 2x2 (60mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Gridfinity

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Anycubic 3X1 Sidecar, Gridfinity

Anycubic 4X1 Sidecar, Gridfinity

Anycubic 2X1 Sidecar, Gridfinity

Gridfinity weld-on 16 5oz. glue holder

Gridfinity Noga Mavast Deburring Tool

gridfinity deodorant storage 4x1

nail clipper gridfinity bin

Gridfinity BLACK+DECKER Multibit Screwdriver

Pegboard-to-Gridfinity_2x4.stl

Spiralized Gridfinity Bins

Inverted Gorilla Glue Stand (Gridfinity)

Gridfinity - CEC Corp Superglue - 120g.stl

Gridfinity DMM Probe Holster

Celtic Knot Gridfinity Bin 2x2 Extended

Gundam Marker Gridfinity Bins

Gridfinity Stackable Lids

Gridfinity Photo Frame

Gridfinity Wowstick.stl

View 10 new models

Model Train Gridfinity Display Frame Remix