Zig Zag Planters (4 variations)

Zig Zag Planter Alpha.stl

Hexagonal pot v3.stl

Rec Bonsai Pot Legs.stl

Modern Planter 001

Tall Planter 01.STEP

Sprinkler for Plants with Hose

Barrel Planter Rim w Drain

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
_____________________________________________

Barrel Planter Rim w Drain Holes

Hope you Enjoy



_____________________________________________

If you print some of my models please tag me on social media.

www.Twitter.com/carmelo_nazario
www.instagram.com/thecreatorx3d

If you want to help a brother out please consider signing up to my patreon.

www.patreon.com/thecreatorx3d

Succulent Planter

PLANT STAND ASSY-REF ONLY.stl

Wall hanging planter

Watering Can

watering_can.stl

Llama succulent planter

Llama for your succulents! Has drain holes. Would recommend as little support as possible because it is a nightmare to get out from underneath if too thick.

Stackable Planter

It's a Truncated Octahedron, and a planter. 
You can stack them! Hooray!!

Small self-watering plant starter pot

This is a simple design of a small plant starter pot that allows you to fill a cavity in the bottom with water to keep the soil moist for over a week ensuring that your new seeds or seedlings never go dry.

This is an original design and not remixed but I've see similar pots out there from which I took inspiration. Apologies for not giving specific credit.

This print consists of 2 parts: the pot and the insert. I've printed several of these and they've all been water-tight, but (of course) print and use at your own risk. Here are my print settings:

(PrusaSlicer 2.3)
Layer Height: .2 mm
First Layer: .2 mm
Vertical shells--perimeter shells: 2 minimum
Horizontal shells--solid layers: 5 top, 4 bottom
Ensure Vertical Shell Thickness (selected)
Infill: 15% (DOESN'T MATTER as the shell settings and thickness should ensure 100% infill regardless)


Self watering plant starter pot

Self Watering Plant Pot with Water Level Indicator

sprial_plant_pot.stl

Sphere Planter Split, Vase Mode, Slimprint

HydroponicTree

A modular based hydroponic tree, fits 2inch netcups (or print them too). Sit the tree on a bucket with a lid, fill it with nutrient, pop a water pump into the bucket, feed the tube up the center and connect it to the spout at the top.

Printed best (and quickest) with a .8 nozzle, but can print with .4 (increases time).

Best printed in food grade material such as PETG (as PLA is somewhat water sensitive)

HydroponicTree-Pod-3bay.stl

Bee Watering Board

Designed to be used with a regular mouth mason jar. Fill a mason jar, place the watering board on top of the mouth of the mason jar, then while holding the two together, flip them over and place on a level surface. The water will flow into the trench and be kept full by the mason jar. The trenches are shallow enough that the bees will not drown.

NOTE: Print in light-colored material to reduce heat collection and thus evaporation.

Gardening & Landscaping

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 35 new models

Hexagonal pot v3.stl

Rec Bonsai Pot Legs.stl

Modern Planter 001

Sprinkler for Plants with Hose

View 24 new models

Succulent Planter

Wall hanging planter

Watering Can

Llama succulent planter

Stackable Planter

Small self-watering plant starter pot

Self Watering Plant Pot with Water Level Indicator

View 16 new models

HydroponicTree

Bee Watering Board