Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Medium Tolerance Long Bony Basilisk:**
https://than.gs/m/937050

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Shakaworld3d Baby Pumpkin Patch Dragon fidget spinner 

Easy to print in place pumpkin patch dragon

Dust Blower Vase mode TPU/Flexible

Shelled dust blower.stl

Christmas Tree Springo

tree-springo.stl

Shakaworld3d Pumpkin Patch Dragon Challenge Release V1.stl

Another printing Challenge - the Pumpkin Patch Dragon is a print in place dragon.  The challenge is to print it without supports and a brim.

Squash Springo (2 sizes)

squash-full-bot-nosupports.stl

Flexy Italian Hand

This is a VERY SIMPLE file for a flexible italian hand. I am not that experienced with 3d modeling and this is my attempt to make something funny.

Guitar Wall Mount Hanger with Flexible Top

60mm_Arm.stl

FlexiGorilla 2.0

Articulated Flexi Gorilla. About 92mm x 74mm x 8mm at 100%. 

Prints with no supports.

Examples printed in Hatchbox Black PLA on Bambu X1-Carbon with 3 top & bottom layers and 15% gyroid infill.

Flexi Hammer keychain

Flexi Hammer Keychain, easy print.
Print with 30% infill density. 

Flexi Hammer Keychain

Coffee Pal

Coffee Pal Mug.STL

flexi bat

Pineapple Springo // Tasty Springos Pack No.1

pineapple-full-bot.stl

PrintABlok Flexi Block

178b Flexi Blok B.stl

Pentagon Springo

This five-sided Springo behaves a bit differently! For best results, print at .15mm layer height with 100% infill. Prints without supports, just carefully pry the coil apart with a palette knife, butter knife or something similar after printing!

[Relevant Video](https://www.youtube.com/watch?v=HgY7ovYWplg)



68 Key Cover // Embedded Print

[Process Video](https://www.youtube.com/watch?v=ABUVz4zIPfo)

A key cover made for the 68 (Schlage, SC1, C) type key. The key is embedded into the print by pausing at 3.4mm and, if necessary, moving the extruder out of the way, to place the key inside the print. Optionally, you can also do a filament change at 4.8 mm to introduce a second color for the top pattern.

---

Pause at Z height 3.4mm to embed key, and at 4.8mm to change colors.

If the layer isn't clean above the key, increase infill/bridging overlap in your slicer, or dry a coat of hairspray on the key.

Compliant Stand Clips

standclipwide.stl

Sausage Link Chain - Articulated Fidget Model

sausage_top.stl

Flexy Banana

A silly little print of a Flexible Banana. It's a great fidget toy.

No need for support while printing.

Prints in PLA with no problems, but I assume PETG should give the gecko an even more flexible.

Be aware that you need to have a pretty well-tuned printer to pull this off.

Have fun with your super flexi banana!

Creative Commons (4.0 International License)
Attribution-ShareAlike
: [https://creativecommons.org/licenses/by-sa/4.0/](https://creativecommons.org/licenses/by-sa/4.0/)

FLEXIBLE

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Shakaworld3d Baby Pumpkin Patch Dragon fidget spinner

Dust Blower Vase mode TPU/Flexible

View 16 new models

Shakaworld3d Pumpkin Patch Dragon Challenge Release V1.stl

View 78 new models

Flexy Italian Hand

View 18 new models

FlexiGorilla 2.0

Flexi Hammer keychain

Coffee Pal

flexi bat

View 20 new models

PrintABlok Flexi Block

View 66 new models

View 111 new models

View 72 new models

View 10 new models

Flexy Banana

Flexi Extruder Toy