This 5x5 Sliding Square puzzle is blank, as it was designed for marking with a [fiber laser](https://youtu.be/xA2K56AQBho)... but if there's demand I can make fully printed versions! You might also just want to print this version and paint on your own design or design the puzzle some other way :)

Print 25 tiles, assemble them within the border, then snap it all into the frame to hold it together. Laser mark the assembled puzzle and then it's ready to be scrambled!

100mm x 100mm puzzle size, which I made specifically for the EM-Smart Basic 1 I've just reviewed [on YouTube here](https://youtu.be/xA2K56AQBho). Unfortunately I haven't had great results marking prints with diode or CO2 lasers, but you're welcome to get creative!

If you're interested you can get $100 off using my code 'Makeanything' and these affiliate links* below:
• [EM-Smart Basic (US)](https://bit.ly/3wCbxi5)
• [EM-Smart Basic (EU)](https://bit.ly/3NeBCIP)

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

Sliding Square Puzzle (for laser marking) // 5x5

SlidingSquare_Tile_Flat.stl

Frame_Sturdy.stl

This simple and easy print lets you connect the [xTool Smoke Purifier](https://bit.ly/MAxSP) ([Amazon](https://amzn.to/4d9ByGd))* to the EM-Smart Laser Safety Enclosure. The purifier hose friction fits to this print.


If you're interested you can get $100 off using my code 'Makeanything' and these affiliate links* below:
• [EM-Smart Basic (US)](https://bit.ly/3wCbxi5)
• [EM-Smart Basic (EU)](https://bit.ly/3NeBCIP)

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

xTool Smoke Purifier to EM-Smart Laser Enclosure Adaptor

EM Vent Adaptor_Screw.stl

This adaptor lets you quickly adjust the z-focus on an EM-Smart Basic fiber laser marking machine using a standard handheld drill. Both parts print without supports and just pop together! I made this for the EM-Smart Basic 1, which I've reviewed [here on YouTube](https://youtu.be/xA2K56AQBho).

It should be compatible with EM-Smart Basic 1, Basic 1R, Basic 2, Basic 2R, MOPA, and Super models of fiber laser marking machines. If you're interested you can get $100 off using my code 'Makeanything' and these affiliate links* below:
• [EM-Smart Basic (US)](https://bit.ly/3wCbxi5)
• [EM-Smart Basic (EU)](https://bit.ly/3NeBCIP)

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

FIBER

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Sliding Square Puzzle (for laser marking) // 5x5