Call of Duty Black Ops 4 Zombies Primis Busts

RICHTOFEN-PRIMIS-BO4-BUST-FIXED.stl

Ender 3 Zero Y Offset BLTouch Mount

Ender3_ZeroY_BLTouch_Mount.stl

Ender 3 V2 Runout Sensor Filament Guide - Fully Printed

Filament Guide.stl

Ender 3 Max X motor mount for use with Sprite Zero Offset mod

X_motor_cap_01.stl

Ender 3 Filament Spool Holder - Fully printable upgrade

Ender 3 Filament Spool Holder - Master.stl

3D Printer Filament Duster

A clip-on fliment duster to ensure no dust makes it into the hotend on the filament.  Prints in place with a live hinge and friction clamp.  

You get better quality if you print this open-side-up, due to the latch. Also I highly recommend enabling top layer ironing as it makes the hinge a little bit stronger.

Filament Duster

Ender 3 Filament Spool Retainer

This cap clips onto the spool holder to prevent spools from somehow finding their way off of the holder and onto the print bed.  I didn't think this was an issue but alas the ender has proved me wrong lol.  The outer diameter of this thing is just big enough that no spool should be able to make it over.  

Creality E-Fit 5015 Cooling Fan Adapter

I created this adapter to mount a 5015 to the E-fit direct drive extruder kit from Creality.

Prints with no supports and very little filament. Use the existing bolts in the kit to mount the adapter then use M3 bolts to mount the fan to the adapter.

This is tested and works but I am no fluid dynamics expert.

Show me yours if you print one!

@kwerkshop on Instagram

HMG7.2 ADXL345 22.5mm Horizontal Mount.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**


 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**


Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.


So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 


If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.


If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com


If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Creality Water Cooler Reservoir Bracket

Two of these brackets will hold a Creality Water Cooling Tank to the top of an Ender 3, or any other printer with a similar extruded aluminum bar, 

Mini Ender 3 V2

Mini Ender 3 V2.3mf

Ender 3 V2 Neo Filament Sensor Mounting Bracket

Filament Sensor Mount Mk.2.STL

Bed leveling bushing for Ender 3 V2

Bed leveling bushing for a ender 3 v2 to get rid of springs

Ring light led Holder for 2020 frame  Ender 3, Ender 3 v2, Neptune 2, Neptune 2s.

Ring light led Holder for 2020 frame (Ender 3, Ender 3 v2, Neptune 2, Neptune 2s... ) Segurador de Ring light para Ender 3, neptune2s etc.


Ender 3V2 Hotend Fan Cover Housing Duct

Direct Drive adapter long v2.stl

I remixed this direct drive adapter for my Ender 3 V2 from this thing:
https://www.thingiverse.com/thing:4787846
I added some extras to fit my printer better:

- cable guide + ziptie bracet
- some structural braces
- small cutout for extruder wheel

Length fits any fan housing, i made it for briss moto mit 4020 fan.

Cableloom Holder.stl

I designed this small Cableloom holder for my Direct drive system since i routed my cable around the left of my Printer. 

Creality Ender-3 V2 tool holder

A tool holder for the Creality Ender-3 V2.

Print :
Resolution: 0.2 mm
Infill: 20%
Supports: No

Ender 3 V2

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Call of Duty Black Ops 4 Zombies Primis Busts

Ender 3 Zero Y Offset BLTouch Mount

View 12 new models

Ender 3 Max X motor mount for use with Sprite Zero Offset mod

Ender 3 Filament Spool Holder - Fully printable upgrade

3D Printer Filament Duster

Ender 3 Filament Spool Retainer

Creality E-Fit 5015 Cooling Fan Adapter

View 510 new models

Creality Water Cooler Reservoir Bracket

Mini Ender 3 V2

Ender 3 V2 Neo Filament Sensor Mounting Bracket

Bed leveling bushing for Ender 3 V2

Ring light led Holder for 2020 frame Ender 3, Ender 3 v2, Neptune 2, Neptune 2s.

Ender 3V2 Hotend Fan Cover Housing Duct

Direct Drive adapter long v2.stl

Cableloom Holder.stl

Creality Ender-3 V2 tool holder

View 12 new models

Ender 3 v2 Raspberry Pi 4 Touchscreen Enclosure