Feather Dragon Egg

feather egg bottom 2.stl

Schoens Batwing Egg

This egg design is part of a series of “10 Decorative Minimal Surface Eggs”. The series was originally created in 2021.
See my page for a more recent similar series of hollow “10 Easter Eggshells” that can be used to store objects or candy.
The descriptions below offer specific suggestions for printing. One general word of caution is when using “tree” supports, be sure to add “support blocks” to prevent the tree structures from extending up into the interior of the egg. They’ll be impossible to remove.
Expect to do a bit of post-print cleaning with each piece.
Schwarz' P Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schwarz’ D Egg
The Schwarz D Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s Gyroid Egg
The Schoen’s Gyroid Egg requires tree supports for the bottom third or so.
Schoen's Batwing Egg
The Schoen's Batwing Egg is tricky in that it has some rather large horizontal surfaces. The model shown was printed with an extensive amount of tree support. While the overall structure held up, the undersides of the horizontal surface required a lot of cleanup.
Fischer-Koch S Egg
The Fischer-Koch S Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schwarz’ CLP Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schoen’s I-WP Egg
Schoen’s I-WP Egg requires tree supports for the bottom third or so.
Schoen’s F-RD Egg
Schoen’s F-RD Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s F-RD(r) Egg
Schoen’s F-RD(r) Egg requires tree supports for the bottom third or so.
Fischer-Koch C(Y) Egg
Fischer-Koch C(Y) Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.


Valentine's Egg

DragonEgg_Valentine_PrintInPlace_Colored.3mf

Cracked Mystery Dragon Egg

cracked egg top 2.stl

Bunny Chick Clicker

BunnyChickClicker_3MF.3mf

Easter Trio Egg Container, Fun Easter Design, Toy for Chick!

3 pack EggContainer_BAMBULAB.3mf

Easter egg with a bunny money giver

#26 bunny money giver.stl

Cut Crystal Eggs - Set 1

Cut Crystal Egg 1.stl

Egg // Flatland Keychain Magnet

Flatland_Keychain_Egg_Case.stl

Schoens I-WP Egg

Atria and Egg

Atria.stl

Nutcracker egg for Christmas decoration - Print in place - No supports - STL

02. NUTCRACKER EGG KEYCHAIN.stl

Schoens F-RD Egg

Schoens F-RD Egg.stl

Flexi Bunny Cute keychain

Bunny white.stl

Yoshi Clicker / Figure

YoshiFigure.stl

Gyroid Egg Shade

Egg Light v2.stl

Crumpled (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile, they're also shown in the pictures

EggWithLegs_PrintStart3D.stl

Egg with Legs - PrintStart3D
NO SUPPORTS - NO ASSYMBLY

Introducing the one-of-a-kind 3D printed model that will have everyone doing a double-take - an egg with legs! This whimsical creation is sure to add a touch of playfulness to any space.

This model is not just a simple desk decoration; it's a conversation starter that will captivate the attention of anyone who sees it. Place it on your office desk, living room bookshelf, or bedside table and watch as it brings a smile to the faces of everyone who comes across it.

The smooth and curvaceous shape of the egg perfectly complements the sleek and slender legs, creating a stunning contrast that is both pleasing to the eye and touch.

Crafted with the latest technology, this model is printed as one piece, requiring absolutely no assembly. With a printing time of just around 2 hours, you can quickly bring your egg with legs to life and marvel at its unique design.

The egg with legs 3D printed model is a perfect gift for anyone who appreciates art, design, and creativity. Whether you're a collector of unique and quirky objects, or you simply want to add some fun to your space, this model is sure to impress. Don't miss out on the opportunity to own this captivating creation!

This little guy is just waiting to be painted for Easter! :)

Egg with Legs - PrintStart3D

Make money by signing up for the PrintStart3D commercial license and sell this 3D printed model!
www.printstart3d.com

Modern Egg Cups, Egg Holders

EH004.stl

EASTER BUNNY TEALIGHTS (VORONOI) / EASTER DECOR / BUNNY DECOR / MODERN DECOR / LIGHT AMBIENTE

V2_WITHOUT-TEALIGHT.stl

Egg

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Feather Dragon Egg

Schoens Batwing Egg

Valentine's Egg

Cracked Mystery Dragon Egg

Bunny Chick Clicker

Easter Trio Egg Container, Fun Easter Design, Toy for Chick!

Easter egg with a bunny money giver

Cut Crystal Eggs - Set 1

Egg // Flatland Keychain Magnet

Schoens I-WP Egg

Atria and Egg

Nutcracker egg for Christmas decoration - Print in place - No supports - STL

Schoens F-RD Egg

Flexi Bunny Cute keychain

Yoshi Clicker / Figure

Gyroid Egg Shade

Crumpled (Easter) Egg

EggWithLegs_PrintStart3D.stl

Modern Egg Cups, Egg Holders

EASTER BUNNY TEALIGHTS (VORONOI) / EASTER DECOR / BUNNY DECOR / MODERN DECOR / LIGHT AMBIENTE