# ⚔️ Cyber Oni-Samurai 13 – Dummy 13 Custom Figurine  

A cybernetic Oni warrior brought to life!  
This figurine is built on the **Dummy 13 platform**, scaled up to **150%** to better capture the intricate details of the face, horns, and armor.  

The design is split into **4 plates**, making it easier to manage the build, mix materials, and customize your colors.  

---

## 🧩 Plates & Print Setup  

**Plate 1 – Frame**  
- 🔧 Best printed in **PETG** (recommended for joints).  
- **ABS/ASA** works best for long-term durability.  
- PLA is not recommended (stiff, brittle, and creeps under stress), though it can work if it’s all you have.  
- ⚠️ Expect tighter joints, possible snapping, and loosening over time if you go with PLA.  

*(Frame material recommendations adapted from @soozafone’s original Dummy 13 v1.0 post.)*  

---

**Plate 2 – Head Armor**  
- 🎨 Printed with **PLA** (AMS multi-color setup).  
- Easier to swap AMS filaments than to paint the head (though painting works too).  
- **Recommended Settings:**  
  - Layer Height: **0.12 mm**  
  - Supports: **Tree Supports Slim**  
- Be gentle removing supports from the **hair** – proper calibration will give you a clean result.  
- ✅ I ran a full calibration and maintenance pass before printing the head, highly recommended.  

---

**Plate 3 – Armor**  
- Printed in **PLA**.  
- Designed for multi-color printing – most parts are separated for easy AMS swaps.  
- ⚠️ Chest piece is not separated (too late in the design to redo).  
- Supports: **Tree Supports Slim** are required.  

---

**Plate 4 – Sword & Sheath**  
- Printed in **PLA**.  
- Simple weapon accessory to complete the Oni-Samurai aesthetic.  

---

## 🎨 Filament Recommendations  

**Armor parts:**  
- Works with PLA, PETG, or ASA.  

**Frame parts:**  
- Best with **ABS/ASA**, **PETG** also works.  
- PLA is possible, but expect issues with joints over time.  

---

## ⚔️ Final Notes  

- Platform scaled up to **150%** for better detail.  
- Total: **4 plates**.  
- Color scheme is flexible – swap filaments in AMS or remix your palette.  

---

## 🧵 Recommended Filaments (Affiliate Links)  
If you’d like to try the filaments I use and support my work, here are affiliate links (I may earn a small commission at no extra cost to you):  

**PLA Filaments**  
- [Overture PLA](https://amzn.to/3V8SXac)  
- [Polymaker PLA](https://amzn.to/45pdmhj)  
- [Anycubic PLA](https://amzn.to/45VPK3T)  

**PETG Filaments**  
- [Overture PETG](https://amzn.to/4mIeTog)  
- [Elegoo Rapid PETG](https://amzn.to/4oGvpqD)  
- [Anycubic PETG](https://amzn.to/4fMKTFG)  

---

 


Dummy 13

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads