Replacement cabinet door knob

This was designed not to require supports, with a .4mm nozzle. The bottom of the knob has a whole designed for an M4*6*6 brass insert. One of the best ways to insert the insert is with a soldering iron tip, press the insert in until it's flush or slightly below the plastic and then you have a perfectly useful knob. No supports were required, when I printed it but depending on the machine/slicer supports may be necessary.

Desk Shelf

left side .stl

DIY Concrete Kettlebell Shell

This is a shell for making your own DIY Kettlebell with concrete!  Just print, and fill with cheap concrete and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

scale to 90% or less for Ender3 size printers to print on its back.

Designed to print on its back, with supports under the handle.  Orienting it this way will give more strength to the handle as the plastic will lay horizontally through the handle instead of radially.  That said, it can be printed with the handle at the top, but will still most likely require supports for the handle.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

DIY Concrete Dumbbell Shell 2

This is another shell for making your own DIY Dumbbells with concrete!  And this one holds more concrete!  Just print, and fill with cheap concrete (optionally insert 1/2" rebar through handle for more strength) and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

At 100% scale it just fits an Ender3 style printer, coming in at 242mm.

Designed to print with no supports, on end with the filling hole at the top.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

DIY Concrete Dumbbell Shell

This is a shell for making your own DIY Dumbbells with concrete!  Just print, and fill with cheap concrete (optionally insert 1/2" rebar through handle for more strength) and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

At 100% scale it just fits an Ender3 style printer, coming in at 242mm.

Designed to print with no supports, on end with the filling hole at the top.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

Universal remote upgrade

Projector remote shell full.3mf

Screwdriver Holder

9mm hole.stl

Vacuum Forming Machine For A4 Sheet

Hi everyone
This is a simple vacuum forming machine designed to be used with A4 sheets of plastic.
You need to weld the plastic holder together.
To use the vacuum system, you will need to cut a hole in the vacuum box to fit a shop vac hose.
It is recommended to use rockwool to insulate the heater box.
Seal the vacuum box nicely as well. 
Seals in the design are meant to be soft rubber-like silicon.
If you have any questions just ask in the comment section.
Happy Vacuum Forming

RGB Splitter Hub 2.5in SSD Mount

Bracket for mounting a RGB Splitter hub to a 2.5" SSD mount in your PC case. I didn't like how to magnets that came with this splitter would scratch up the black finish on the metal in my case when it shifted around. 

Uses M3 bolts and nuts. Simply remove the top plexiglass piece and remove the bolts that have the magnets on them and assemble it again but with M3 bolts and bolting it to the 3D printed mount.


Diy

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 20 new models

Desk Shelf

DIY Concrete Kettlebell Shell

DIY Concrete Dumbbell Shell 2

DIY Concrete Dumbbell Shell

Universal remote upgrade

Screwdriver Holder

Vacuum Forming Machine For A4 Sheet

RGB Splitter Hub 2.5in SSD Mount

7" Tablet (Odroid N2+)

Blank Lid - Choose your own Adventure! - Can Cup

IKEA KUGGIS Drawer system

Daisy Chain DIY - See pictures...

View 12 new models

Kirigami Bed Front - Voron V0 & V0.1 Mod

Meanwell LRS350 120mm Fan Cover - Quiet Mod!

Honey Comb 120mm Fan Grill

Dyson V11 Bosch vacuum adaptor

Poo Rocket - Dog Waste Bag Holder

Jano-Leafs 1.0: 3D Printed Wall Mounted LED Panels (Triangular)