Cat Statue (Pre Supported)

Cat_Statue.stl

Snowy Lawren Trees - Small

Small Snowy Lawren Tree 1 - Snow.stl

Woven Wreath Form - FDM

Woven Wreath Form - FDM.stl

Flintlock – Gun Kit (No AMS, No Support, No Glue)

Earth Brown 2.stl

Spiral Christmas Balls

#Summary
These are a quick, fun, and are very lightweight. Each ball has the same cross-section and twist. The main differences are the size and number of arms.

* Large ball: 80mm diameter, weighs less than 17g, takes about 6 hours to print
* Small ball: 56mm diameter, weighs less than 9g, takes about 3 hours to print

These are part of my [Christmas Collection](https://www.thingiverse.com/dazus/collections/christmas-collection).

I designed these using Affinity Designer (for cross-sections) and Blender (everything else).

The arms need support at multiple points to keep from warping and breaking if you're using an FDM printer. To make this quick and easy, I provided a version of each ornament with built-in supports. I still had Cura add supports, but only where the balls touch the build plate. For details, se the print settings below.

#Print Settings
##Basics

* Layer Thickness: 0.15mm
* Walls: 0.4mm (1 line)
* Top/Bottom thickness: 0.45mm (3 layers)
* Build Plate Adhesion: Brim

If you have holes in your print (from the thin walls), I recommend increasing flow and/or print temperature. You might also decrease print speed and travel speed (I use 30mm/second and 80mm/second).

##Infill

Infill is optional. They should print OK without it, but I added some just at the bottom of each ball. I used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill (Lines pattern) for the first 51mm for the large ball and 37mm for the small ball.

##Supports

I recommend using the versions of the balls with built-in supports. You'll still need a little support for the first few layers (where the ball touches the build plate), but my supports make printing the arms of the ball easy. You can remove my supports with your bare hands (no tools) and they leave little or no marks on the print.

I recommend printing these with Cura-generated supports "touching buildplate" with a 60-65 degree overhang angle and a brim for the supports.

For support infill, use Concentric pattern, 10% density. Roof density of 75%, floor density of 50% works well and releases cleanly.

The small ball doesn't need any supports for the inside roof. I found it printed very cleanly. 

The large ball printed well enough for my taste without supports for the roof. It print was a little rough, but it only shows if you pick the ornament up and look up from the bottom of the ornament. When it's hanging on a tree, you'll never see that part of it. There's enough space between the arms of the ornament that you could get tools in to cut up and remove supports if you want to add them, but I don't think it's worth the effort.

Year of the Dragon Yin Yang

Ying_Yang_Dragons_2.stl

Snowflake Fidget Spinner (Hollowed)

Snowflake Fidget Spinner (Hollowed).stl

Gimli’s Bearded Axe – Axe Kit | No Supports, No AMS, No Glue

Ash Grey 3.stl

Tetsukiba

Ash Grey.stl

Pop Garland

Pop Garland Display only Do Not Print.stl

White Dragon wall art

Dragon Light_1.stl

PLAYSTATION ICONS - DECOR

PS_DECOR_BACK.stl

The Toy Factory (Bundle Version)

STL Demo Placeholder (User Master File Instead).stl

Not So XL Grinch 

Not So.. XL Grinch.3mf

Chef Goose Gear for Porch Goose

PorchGooseChef3mf_FunFam3D.3mf

SANTA Shhhhh

SANTA Shhhhh.stl

Viking Axe – Axe Kit (No AMS, No Support, No Glue)

Army Beige.stl

Bubble Vases

Bubble Vase 150mm.stl

Cat in Pumpkin

Cat pumpkin.stl

PumpkinKeychain - 5 Versions - Halloween

PumpkinKeychainV1+.stl

Decoration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cat Statue (Pre Supported)

Snowy Lawren Trees - Small

Woven Wreath Form - FDM

Flintlock – Gun Kit (No AMS, No Support, No Glue)

Spiral Christmas Balls

Year of the Dragon Yin Yang

Snowflake Fidget Spinner (Hollowed)

Gimli’s Bearded Axe – Axe Kit | No Supports, No AMS, No Glue

Tetsukiba

Pop Garland

White Dragon wall art

PLAYSTATION ICONS - DECOR

The Toy Factory (Bundle Version)

Not So XL Grinch

Chef Goose Gear for Porch Goose

SANTA Shhhhh

Viking Axe – Axe Kit (No AMS, No Support, No Glue)

Bubble Vases

Cat in Pumpkin

PumpkinKeychain - 5 Versions - Halloween