Whoop or E010 Camera Mount

ISDT 608AC Slim Power Pack

Drone Gate Light Rod 

Hey, this is an enclosure and stand for a light rod that i made for my brothers drone racing tiny whoop group (BTW, Birmingham Tiny Whoops) as a slalom obstacle. 
The LED strip is inserted into a length of 20mm oval conduit that you can get from Screwfix or Wickes. the Tri-pod style legs are made from 16mm oval conduit.
it is sized and shaped as quadrants to be able to fit inside a poster tube of which the ID is 110mm.
the two "IN/OUT" square holes are for RJ45 breakout boards to provide Data and Power to each unit in a daisy chain.(https://www.amazon.co.uk/gp/product/B083C4LYQL/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)
Internal height of this print is designed to accommodate a DC DC converter for power (https://www.amazon.co.uk/gp/product/B07H5MC6V3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) 
Cover is attached to Base with M3 machine screws with heat set brass inserts.
hole in a hole in the bottom is for a M6 heat set threaded insert for screwing in a M6 hook. small hole perpendicular to the M6 one is for a wooden skewer for a loop of string or paracord.

Printed with minimal supports
10% infil
4 walls/top/bottom
0.2 layer height
0.4 nozzle

storage box for X2D case Lid.stl

DJI MINI 5 PRO ULTRA COMPACT HARDCASE

Mini 5 Pro Hardcase Part B v1.step

Emax E8 transmitter gimbal protector

stick protector.3mf

Sky-Hero Anakin - Buzzer Holder

Battery Holder for RaGG-e Whoop frame

Fpv Racing RR210 Frame - Gopro Action Camera Holder

2S4ILR_prints.stp

Plates to mill for my 2S 4in Long Range FPV quad

SourceX Antenna Mount for Big VTX with FAN

I modified the one that was already on Thiniverse so that it would better allow the fan of my Big AKK VTX to have maxium effect.
This model allows full flow of air accross the fan and the top of the VTX unit.
The AKK VTX unit is mounted to the top plate of the SourceX frame to allow easy access to the buttons of the VTX.
the 2812 LED Controller fits under it and allows access to the buttons.
its a remix but I can't find a link to the original file.

TBS SourceX GPS holder

This is a GPS Holder for the TBS Source X drone.

Project Oreo: 3.5" FPV Drone

PET-CF Unibody Frame.3mf

Bayraktar TB2 – 1:25 Scale Model

Stand.stl

DJI AVATA 2 ORGANIC FIN + AIRTAG HOLDER

Avata 2 Fin 1.3mf

Sky-Hero Anakin - LED and RX Spektrum Holder

Vortex250Pro Spektrum Satellite RX Mount

TBS SourceX Camer Control holder

At the bottom of the TBS SourceX frame there is a square hold below the FPV Camera.
This is a great spot to put a camera control for the FPV Camera. It fits in nice and tight and the control unit goes in on top. Then screw in the top pad part.
The pad allows the buttons to be pushed but keeps the unit water resistant from Rain. etc.
to make a better seal just put sold glue at the front and sides between the two parts.
Fits the Foxeer Camera 5 button perfectly, but will also fit other models. 
Print with TPU so that you can use the buttons.

Quadcopter Cookie Cutter STL File - 4 inches

Quadcopter 4 B.stl

Littoral Combat Ship LCS-2 USS Independence 3D Print Model

LCS_Complete.stl

DRONE

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Whoop or E010 Camera Mount

ISDT 608AC Slim Power Pack

Drone Gate Light Rod

storage box for X2D case Lid.stl

DJI MINI 5 PRO ULTRA COMPACT HARDCASE

Emax E8 transmitter gimbal protector

Sky-Hero Anakin - Buzzer Holder

Battery Holder for RaGG-e Whoop frame

Fpv Racing RR210 Frame - Gopro Action Camera Holder

2S4ILR_prints.stp

SourceX Antenna Mount for Big VTX with FAN

TBS SourceX GPS holder

Project Oreo: 3.5" FPV Drone

Bayraktar TB2 – 1:25 Scale Model

DJI AVATA 2 ORGANIC FIN + AIRTAG HOLDER

Sky-Hero Anakin - LED and RX Spektrum Holder

Vortex250Pro Spektrum Satellite RX Mount

TBS SourceX Camer Control holder

Quadcopter Cookie Cutter STL File - 4 inches

Littoral Combat Ship LCS-2 USS Independence 3D Print Model