BackPack Hook Under Desk Reinforced

This is a backpack hook that you can screw under the desk. It has 4 screw and should support laptop backpacks.

Basket Smalls (Hoop)

Standard Print Rim and Net.stl

Basket Smalls (Basketball)

Display only do not print.stl

Geometric Origami Pencil pot Pen holder with Drawer

Pen Holder or Plants Pot 120mm.stl

Aperiodic Desk Organizer

Monotile 1 50mm.stl

Remixable Pen Mod for Bic™ Crystal™ type pens

Bic_Mod_Flat_Display_Only.stl

Thrashcan style Pen Holder - remixable - 140x90mm w cap

Thrashcan_iconic_display_only.stl

Knot My Problem

Tired of your kids/classmates/coworkers coming to you with stupid excuses? This cheesy desktop pun can help you get through it. 

See here for video: https://youtu.be/JsiyiJYPUkM 

For first time excuses, run your fingers along the “Knot My Problem” text and quietly repeat the words “Knot My Problem, Knot My Problem…” If the problem does not go away, increase volume.

If the excuses persist, hand “Knot My Problem” to the offender, get up, and leave the room.

If you’ve tried everything and the excuses just won’t let up, you may throw “Knot My Problem” at the whiner in a fit of frustration. 

DISCLAIMER: Don’t blame me if you injure them or break something. Knot My Problem.


Celtic Knot Gridfinity Bin 2x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard: https://social.thangs.com/m/733962 
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Chain Link Gridfinity Bin 2x2 (80mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Microphone Base Holder

Holds the round tapered base of my microphone stand in place via screws, upside-down under a shelf, or could be mounted anywhere.

Chain Link Gridfinity Bin 1x2 100mm

This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


Chain Link Gridfinity Bin 100mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 80mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 60mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 40mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm:
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


DESKTOP

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

BackPack Hook Under Desk Reinforced

Basket Smalls (Hoop)

Basket Smalls (Basketball)

Geometric Origami Pencil pot Pen holder with Drawer

Aperiodic Desk Organizer

Remixable Pen Mod for Bic™ Crystal™ type pens

Thrashcan style Pen Holder - remixable - 140x90mm w cap

Knot My Problem

Celtic Knot Gridfinity Bin 2x2 Extended

View 10 new models

Microphone Base Holder

Chain Link Gridfinity Bin 1x2 100mm

Chain Link Gridfinity Bin 100mm

Chain Link Gridfinity Bin 80mm

Chain Link Gridfinity Bin 60mm

Chain Link Gridfinity Bin 40mm

GIGABYTE H370N WIFI Motherboard IO Shield

Kartell™ inspired Butterfly Container - medium - 150x150x100

Kartell™ inspired Butterfly Container - small - 100x100x70

Kartell™ Inspired Container - medium - 150x150x100