Minimalist Design Self Watering Plantpot

SW009.stl

Red Dragon wall art

Dragon Light_2.stl

Christmas Hippopotamus Ornament 

Hippopotamus.3mf

Designer Catch All Tray "Ovalism"

TR028.stl

Venus Vase for Timeless Home Decor

Venus Vase.stl

Round Self Watering Design Planter "Dropster"

SW007.stl

Flower Vase TERRA - Minimalist Decoration Vase

Vase TERRA by SLIMPRINT.stl

Mix and match cauldrons

Skull cauldron.stl

35 Snowflakes

f1.stl

3 kittens moon heart wall art home decor

3 kittens moon.stl

Planter

Model30.stl

Penguin Birthday Bonus Ornament

Penguin_Ornament_BONUS Birthday_SparkyFace5.stl

Halloween Werewolf Flexi Fidget #3 - No Supports! 

Werewolf Pup Flexi.stl

Fruit bowl “Fire”

**A unique fruit bowl made from 3d printed parts and commercially usual wooden skewers.** It is easy to print and assemble. The bowl stands very stable due to the flexibility of the skewers.

**Instructions**
- Print the thing
- Buy a pack of wooden skewers –26 are required (you can get them for a dollar in most super markets or online) Size: 200mm x 3mm
- Place the skewers with the pointy side in the thing
- Enjoy!

Size assembled: 210 x 210 x 190 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 220 x 220 x 70 mm
Material usage:120g
Print time: 14h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Christmas Dragon Egg 2025 

Christmas dragon egg base.stl

Cedar Vase for Winter Decor

Carved vase.stl

Jack Christmas Bauble- Nomz

Jack christmas bauble- Nomz.3mf

Diamond Christmas Ball Design 2

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems. It may be a little challenging to print. The key is to get the speed, temperature and flow right for your particular printer/filament combo so the stem prints cleanly at the narrowest point.

I printed this in Matterhackers Translucent Red. It's a nice balance between translucency and reflectivity. For an opaque filament, I'd use a multi-color PLA (like Matterhackers Quantum) or a medium toned silky PLA (gold, red, just use anything that's not really light or dark). Either type of filament would show off the facets nicely.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 110, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the base of the ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I really relied on the supports for build plate adhesion. I used a brim, but I set it to 3.2 mm gap from the print so it would touch the supports but not the ornament.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
Support Overhang Angle: 45 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 m above the build plate so that the supports would only be added to the bottom of the ornament.

Midcentury Miniature Bookshelf Bookend – 1:12 Scale Dollhouse Furniture or Creative Bookend

pixelandpapier__bookcase__bookshelf.stl

(Italian) Apulian Pumo (1)

Sharing something about my homeland ☺️

The **pumo** is a** traditional decorative element** from my region, Apulia, which symbolizes **spring** 🌼

Its shape resembles that of a **bud**, ready to **bloom**, with the auspicious meaning of **fertility, wealth and good omen** for future events.

To bring luck, wealth and prosperity, however, the pumo must be given as a gift. In fact, it's often chosen as party favors on several occasions.

In this case, I hope you like and would accept them as my gift for you!

Hope you'll enjoy printing these models and add them to your decorations and also, why not, gift them to your friends, relatives and everyone else you would like to ☺️

**Get the other exclusive models of Pumo available only on my** [Patreon Page](https://www.patreon.com/RandomizY) !
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printers: Geeetech A10
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.2 mm (0.4 mm wall thickness; 5 top / 2 bottom layers)
🔸 Infill : 0%
🔸 Supports are not strictly mandatory, but you can use them if you prefer (to be sure to better print bottom part of the leaves)
🔸 Printing Temperature: 205°C / Build Plate Temperature: 60°C
🔸 Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
🔸 Filaments: Silk Blue PLA by Eryone
🔸 Size: 9,5 x 9,4 x 10 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Apulian Pumo (1)

DECORATION

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Minimalist Design Self Watering Plantpot

Red Dragon wall art

Christmas Hippopotamus Ornament

Designer Catch All Tray "Ovalism"

Venus Vase for Timeless Home Decor

Round Self Watering Design Planter "Dropster"

Flower Vase TERRA - Minimalist Decoration Vase

Mix and match cauldrons

35 Snowflakes

3 kittens moon heart wall art home decor

Planter

Penguin Birthday Bonus Ornament

Halloween Werewolf Flexi Fidget #3 - No Supports!

Fruit bowl “Fire”

Christmas Dragon Egg 2025

Cedar Vase for Winter Decor

Jack Christmas Bauble- Nomz

Diamond Christmas Ball Design 2

Midcentury Miniature Bookshelf Bookend – 1:12 Scale Dollhouse Furniture or Creative Bookend

(Italian) Apulian Pumo (1)