EL Wire Hearts Container

Hearts Jar Single Print.stl

Parametric Pocket Dice Tower and Storage

Pocket Dice Tower - Demo - Tower.stl

Surface Slab (SplitP)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S: https://than.gs/m/868235 
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


Surface Slab (Fischer-Koch S)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S:
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


Smashed Teacup

Frustrated by your 3D printer? Feel like smashing something? This model is for you!

This Smashed Teacup is part of a set of Smashed Tableware. See links below for other pieces in the set. More to come!

Other pieces of Smashed Tableware:
Teacup:
Saucer:


Locking Twist Capsule

Top - Small Twist Capsule (Original).stl

Annoying Piggy Bank

container (coin slot).stl

Cat Pot

Cat Pot Lid.stl

Print-in-Place Fridge

Print in place container that looks like a fridge... Because why not? The doors snap closed satisfyingly.

I recommend putting a small brim on the doors, they don't have much area touching the bed otherwise.

Reversing Rope Vase

Reversing Rope Vase.stl

Print-in-Place Stackable Storage Cube

Print in place, hinged version of the [Stackable Storage Cube](https://than.gs/m/850764).

Obelisk

Oblelisco.stl

'Enduring Love' Decorative Hearts Flower Vase :: Home Decor

**The _REVERSIBLE_ Flower Vase!**

'Vase' seems to be a fixture on the most-searched terms - so here I am, giving the people what they want! ⚱️

Feel the love on both sides with our latest vase design. Though not necessarily a Mother's Day design, it definitely works well for the occasion! If you have a tough time making decisions like I do - this vase is just for you, because that's also how it was made. 

** **3mm wall (approx.); _Spiral/Vase Mode_ for single perimeter** **


**THIS MODEL IS NOT TO BE USED FOR COMMERCIAL USE IN ANY WAY, SHAPE, FORM, OR MANNER. THANK YOU & ENJOY!**

Feel free to **TAG US** in any post on social media! (**_TikTok, Instagram, Facebook_**)

TWO-WAY LOVE VASE :: Decorative | Home | Love

Transforming Rope Vase aka The Carla Vase

These coiled-rope bowls fit neatly together for storage.

See here for video: https://youtu.be/AAXGi_Sm62k 

Download the full set:
Small: https://than.gs/m/811394 
Medium: https://than.gs/m/811395 
Large:


Nesting Rope Bowl (Large)

 Yin-Yang Container

Yin-Yang Container Top.stl

bottle cap catcher.stl

**NO SUPPORTS NEEDED**
this is a round, smaller (about the same width as the bottle opener itself, the issue with the last one seemed to be that it was to wide) and also more pleasant looking version of my rectangle cap catcher that I made for those bottle openers that mount to a wall and drop the caps, meaning they fall to the floor and are a pain to pick up or are in an annoying place to prevent it falling to the floor (above a table or low down meaning it's "not much further to grab the cap off the floor"). this model comes with a draining hole for all the different liquids that may end up in there whether it's rain, beer, juice of some kind or in some country's, tomato sauce. Simply place 2 screws/nails into wall where you want to mount it under bottle opener. (I place on wall and use a pencil to mark holes) then slide on and push down to secure. When full, slide up and pull out to remove. empty into a bin and slide back on.
Happy printing!

Rugged Box - Small Size - Print as is, supports included

Hi all,
i saw many modelks of rugged boxes, i decided to design one of my own, printable in one shot, with internal supports added in blender.
Two Sizes: small 100x90x60(height) and Big 180x143x90 (mm).
Must be printed on the short side, with only external supports (touching bluildplate) as the internals are already added.

I hope you'll Enjoy it!.


Rugged_box_simple_Opened_Small_110x90.stl

Rugged Box - Big Size - Print as is, supports included

Rugged Box - two Sizes - Print as is, supports included

Dual Color Remix of Knitted Stocking

Warm your winter supplies with this cozy Knitted Stocking container! 

See here for video: https://youtu.be/jKJB6-62kV4 

The toe, heel and body of the stocking use a regular knit geometry. The upper trim uses a rib knit geometry.

Print without supports. You will get some small areas of print fail on the inside and lower edges, but this will either not be visible or easy to clean up with a file if you choose.


Container

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EL Wire Hearts Container

Parametric Pocket Dice Tower and Storage

Surface Slab (SplitP)

Surface Slab (Fischer-Koch S)

Smashed Teacup

View 10 new models

View 28 new models

Cat Pot

Print-in-Place Fridge

Reversing Rope Vase

Print-in-Place Stackable Storage Cube

Obelisk

'Enduring Love' Decorative Hearts Flower Vase :: Home Decor

View 15 new models

Yin-Yang Container

View 11 new models

Rugged Box - Small Size - Print as is, supports included

Rugged Box - Big Size - Print as is, supports included

Dual Color Remix of Knitted Stocking

Cheeseburger Container - 150mm x 150mm x 100mm