Cable ties - Kabelbinder 

Mountable Marker Holder

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

Filament swatch and tracker

Rack Mount - QNAP QSW-2104

Remix from - https://www.thingiverse.com/thing:966973

Quick and dirty edit to fit the QNAP QSW-2104 Switch

Rack Mount - QNAP QSW-2104.stl

Flexi Articulated Dolphin 1

Brembo brake disk and caliper - CHECK NEW DESIGN IN DESCRIPTION

Creality Ender 3 / MicroSwiss Direct Drive Extruder Motor Knob 

Creality Ender 3 Extruder Motor Knob

joker 

joker-final-v3.stl

Samus' Armcannon (Metroid Prime)

Split Gridfinity Box

Split Box.stl

cable comb (wall-mounted cable holder)

cable comb

Custom holder for darts

Cat Toy Table Hanger 

FlashForge Adventurer 3 pro spool holder

TIE Spinner

D.I.C.E Tower - Dice Integrated Can Enchantment Tower - Dice Tower Can Holder - Print In Place

D.I.C.E Tower - Dice Integrated Can Enchantment Tower - Dice Tower Can Holder - No Supports

Turbo Impeller Blower Attachment for Rotary Tool

Seagate Backup Plus Slim 2TB Holder // Peg Anything

Get your [Seagate Backup Plus Slim](https://amzn.to/3sinPtQ) external drive off the desk and on the wall with this holder compatible with your standard 1" grid 1/4" hole pegboard. Nice!

This is for the 2TB model. You may have to modify the print for different storage sizes.

MacBook Pro (2015) Vertical Mount 

mac mount.stl

Computer Hardware

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cable ties - Kabelbinder

Mountable Marker Holder

ZigZag Christmas Ornament

Filament swatch and tracker

Rack Mount - QNAP QSW-2104

Flexi Articulated Dolphin 1

Brembo brake disk and caliper - CHECK NEW DESIGN IN DESCRIPTION

Creality Ender 3 / MicroSwiss Direct Drive Extruder Motor Knob

joker

Samus' Armcannon (Metroid Prime)

Split Gridfinity Box

cable comb (wall-mounted cable holder)

Custom holder for darts

Cat Toy Table Hanger

FlashForge Adventurer 3 pro spool holder

TIE Spinner

D.I.C.E Tower - Dice Integrated Can Enchantment Tower - Dice Tower Can Holder - Print In Place

Turbo Impeller Blower Attachment for Rotary Tool

Seagate Backup Plus Slim 2TB Holder // Peg Anything

MacBook Pro (2015) Vertical Mount