Tree Lights (Without Ornaments)

Without ornaments display only do not print.stl

Santa Penguin 

santa penguin.3mf

Nutcracker, Christmas Collection  

upper body.stl

Double Spiral Christmas Stretch Ornament 2024

Stretch Double Spiral Whole.stl

Cozy Cat Christmas Tree Ornament – Holiday Decor

Cat on sofa.3mf

Swoop 3 Christmas Stretch Ornament 2024

Stretch Swoop Ornament 3 Whole.stl

Christmas Shadow Box (A)

Plate 1.stl

Double Diamond Christmas Ball

###About the Design
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

###Not To Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

###Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

###Print Time
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Double Spiral Christmas Finial 2024

Finial Double Spiral Whole.stl

Lantern Christmas Stretch Ornament 2024

Stretch Lantern v2.stl

Sh-Elf split, Female 

hat.stl

Swoop 14 Christmas Tree Topper 2024

Topper Swoop 14 Whole.stl

Festive Penguin 

Penguin.stl

Lantern - 3D Printable Modular Design with Customizable Options

281_Lantern_PirateLife_PIXELandPLASTIC_RM.3mf

Gingerbread Cookie Ornaments Set 2

GingerbreadOrnamentSet2-1-STL-FunFam3D.stl

Christmas Tree Tealight Lamp

tree.stl

Kaleidoscope Teardrop Ornament

Shield Kaleidoscope Teardrop Ornament.stl

Cathedral Christmas Finial 2024

Finial Cathedral Whole v2.stl

Santa Hat Wall Vase – Festive Holiday Decor

vase cap.3mf

Swirl Ornaments

Swirl Ornament 130.stl

Christmas ornament

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tree Lights (Without Ornaments)

Santa Penguin

Nutcracker, Christmas Collection

Double Spiral Christmas Stretch Ornament 2024

Cozy Cat Christmas Tree Ornament – Holiday Decor

Swoop 3 Christmas Stretch Ornament 2024

Christmas Shadow Box (A)

Double Diamond Christmas Ball

Double Spiral Christmas Finial 2024

Lantern Christmas Stretch Ornament 2024

Sh-Elf split, Female

Swoop 14 Christmas Tree Topper 2024

Festive Penguin

Lantern - 3D Printable Modular Design with Customizable Options

Gingerbread Cookie Ornaments Set 2

Christmas Tree Tealight Lamp

Kaleidoscope Teardrop Ornament

Cathedral Christmas Finial 2024

Santa Hat Wall Vase – Festive Holiday Decor

Swirl Ornaments