Double Diamond Christmas Ball

###About the Design
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

###Not To Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

###Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

###Print Time
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Double Spiral Christmas Finial 2024

Finial Double Spiral Whole.stl

Lantern Christmas Stretch Ornament 2024

Stretch Lantern v2.stl

Sh-Elf split, Female 

hat.stl

Swoop 14 Christmas Tree Topper 2024

Topper Swoop 14 Whole.stl

Festive Penguin 

Penguin.stl

Christmas Tree Set with Tray (Tealight compatible)

CHR001-Base.stl

Cathedral Christmas Finial 2024

Finial Cathedral Whole v2.stl

Baby Christmas Dragon

baby Christmas dragon .stl

Zigzag Teardrop Christmas Ornament

Zigzag Teardrop Whole.stl

Baby Yoda Christmas Tree Decoration No Circle

This a no circle version of the [Baby Yoda Christmas Tree Decoration](https://thangs.com/mythangs/file/547312).
In that version i removed the ball circle and there's only the Baby Yoda with a Christmas Hat.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Baby Yoda Christmas Decoration No Circle

Santa Octopus 

Santa octapus main.stl

Swoop 3 Christmas Tree Topper 2024

Topper Swoop 3 v2 Whole.stl

Winter Reindeer Relief Vase – Textured Holiday Decor

Winter Reindeer Relief Vase.stl

Swoop 1 Christmas Stretch Ornament 2024

Stretch Swoop 1 Whole v2.stl

LED tea light, decorative stars "Twinkle Snowflakes"

CHR004.stl

Nosey Ornament

Look kid, stop asking what you’re getting for Christmas. Do you know what nosey kids get for Christmas?

See here for video: https://youtu.be/s-7BUE-TcME 

Print as orientated with the point up. Ensure that you have good bed adhesion. Thread a knotted string through the hole in the cap and attach the cap to the ornament with a twist.


Christmas Decoration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Double Diamond Christmas Ball

Double Spiral Christmas Finial 2024

Lantern Christmas Stretch Ornament 2024

Sh-Elf split, Female

Swoop 14 Christmas Tree Topper 2024

Festive Penguin

Christmas Tree Set with Tray (Tealight compatible)

Cathedral Christmas Finial 2024

Baby Christmas Dragon

Zigzag Teardrop Christmas Ornament

Baby Yoda Christmas Tree Decoration No Circle

Santa Octopus

Swoop 3 Christmas Tree Topper 2024

Winter Reindeer Relief Vase – Textured Holiday Decor

Swoop 1 Christmas Stretch Ornament 2024

LED tea light, decorative stars "Twinkle Snowflakes"

Nosey Ornament

Swoop 1 Christmas Bulb 2024

Candy Cane Egg

Christmas Tealight Box