Impress your friends and intimidate your foes with my TCG deck box design.  The initimidating skull relief sculpture evokes themes of eldritch horror and will strike fear into your opponents.  This box has a nested pin closure and prints in one piece on the plate, no need for any assembly of support.  Just pop this bad boy off the plate, stow your deck, and instert the pin to close it.  This box has storage for over 100 double sleeved standard sized playing cards.  

 This model is available for personal use only.  If you would like merchants rights, please consider a membership.  This model and any other you get from me are then available to print and sell physically, both online and in person.  The .stl is never authorized for resale.


Print in Place skull TCG deck box

skull box one piece_v3.stl

Do you want a fancy place to keep your playing cards nice and safe? This print on fabric model is perfect for standard 2.5" x 3.5" playing cards (Magic, Pokemon, Uno, Skyjo, etc). There is an optional set of pieces you can use to give the inside of the box the same holographic effect as the outside (any PFLAT or holographic build sheet will do - I sell a magnetic version at www.kaizen3dprints.com)

There are two versions, one with a flat top, and the other with a similar arc design as my original clutch. There are two versions with different bottom layers saved in the 3MF file. 
Archimedean Chords = Circles
Octagram Spiral - Stars

The print is .96mm tall with a .24mm layer height, and can be printed on build plates 256x256 or larger. The 3MF file contains printing parameters, with pause commands inserted at layer 3 of 4. Resume the print after your fabric and tape/magnets have been placed for tension. I like using either an illusion mesh found at www.dfwfabricmart.com, a two-way stretch polymesh found at Joann's, or Hobby Lobby for example. Petticoat tulle is a little delicate for the continued use of this box.

You can purchase a fabric sample pack here - https://kaizen3dprints.com/products/fabric-sample-pack

I like using Tri Color PLA silk, where the different bottom layer patterns really shine.

If you are downloading the STL and trying your own settings, a slower speed does wonders for not snagging or dragging fabric. If the speed exceeds 100mm/s, you may have issues with adhesion. I prefer keeping it a constant 50mm/s

If you have any questions, please contact me at Kaizen3DPrints@gmail.com


Playing Card Box

Card Box 3MF.3mf

Card Box.stl

I designed these folding boxes after playing Arkham Horror and Elder Sign many times. These games, like many others, paper your gaming surface with many decks of cards as they require several players to distribute cards while keeping track of their own character cards. That said, this is a common issue for board games so these card boxes can be scaled for your needs.

This page contains two versions of this box: the standard size, and tall version. The tall version is 2x the height of the standard size.

Key benefits of this design:
- It's print in place so you get the lid and box bottom hinged together
- There is a small off-set on the spine so when they are laying flat in a row, they link together and can be moved as a group
- The lid is handy for discards, so to reset the deck, you simply close the lid
- There is a grid of holes in the lid so you can see which deck is inside the box without opening the box (though you can put labels on the spine as well
- There is a large hole on the bottom to allow you to easily pop the cards out
- There is a small protrusion of plastic on the lid which fits into a recess on the bottom for a satisfying click
- All of the holes also reduce plastic use

These have been thoroughly play-tested and are described as being an essential tool for many of the games we play.

Enjoy and game on!

Card box

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Print in Place skull TCG deck box

Playing Card Box