Pumpkin | Candlecube

CUBOCALABAZA.stl

Candle Holders Set

Gracewindale-candle-holder-narrow-2cm.stl

Tumbler, cande holder.

Tumbler.stl

Runa | Candlecube

runa.stl

Concha | Candlecube

concha.stl

Celula | Candlecube

celula.stl

The Lasi Display Stand for Unique Items, Candles, or Plants | Modern Home Decor

LASISTAND.stl

The Lanio Display Stand for Unique Items, Candles, or Plants | Modern Home Decor

LANIOSTAND.stl

The Ranio Display Stand for Unique Items, Candles, or Plants | Modern Home Decor

RANIOSTAND.stl

Candleholder insert

candleholder-insert.stl

Starry Candle

Starry Candle is a minimalist candle holder that plays with light and shadow to reflect the shape of a star on the table.

Use this Christmas decoration to set the mood with its lights, as a centrepiece for your Christmas dinners or as a home decoration.

The ideal candles to achieve the maximum shadow effect are the elongated ones, which can be nailed directly to the base, as it has a small spike, or use the tube that is attached to the base to insert the candle. You can also use small candles to achieve a different effect, which are nailed directly to the base.

**3D PRINTING PARAMETERS**
The following configurations are recommended for printing:

No need to use support
Filling of 20%.
Layer height 0.15 mm or less
Bottom layers: 5
Top layers: 3
Wall line count: 7
Recommended to print in matt filament. You can print the candle holder and support tube in different colours to create different combinations.

Concrete candle holder “Gugelhupf”

**A beautiful concrete candle holder – easily produced at home**
Candle diameter: 16 mm - 26 mm

**What you need**
- TPU filament
- Hobby grade pouring concrete
- Water
- Optional: Acrylic colors
- Optional: Vaseline or kitchen oil

**Instructions (also check images)**
1. Print the mold in TPU – I you have not yet printed this material, check YouTube for instructions. It’s quite easy even with a beginner machine like a Ender 3V2
2. Mix the concrete according to the instructions of the manufacturer
3. Optional: Add acrylic colors to the mix
4. Optional: rub the inside of the mold with Vaseline or kitchen oil for easier separation later
5. Pour the mix into the mold
6. Optional: Bumb the filled mold lightly on your table to get rid of air bubbles
7. Wait until the mix dried. Note that the acrylic color might add to the time it takes to fully dry.
8. Remove the cast by inverting the mold and pulling it out
9. Optional: Paint the cake
10. Have fun!

Size of the finished holder: 89 x 89 x 41 mm
Don't forget to post your makes

**Print settings**
Required build volume: 100 x 100 x 60 mm
Material usage: 40g
Print time: 4h

Material: TPU 95 – other shore hardness down to 80 should work, too – but are not tested.
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Candleholder

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pumpkin | Candlecube

Candle Holders Set

View 11 new models

Runa | Candlecube

Concha | Candlecube

Celula | Candlecube

View 21 new models

View 20 new models

View 29 new models

Candleholder insert

View 21 new models

Concrete candle holder “Gugelhupf”