Pikachu Sleeping - 3MF Colour Print - Pokemon - Fan Art

Spider Gwen - 3MF Full Color - Fan Art

Color Pencil Box

pencil bottom.stl

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

What's better than a donut? _SIX donuts!_

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

This 'Deconstructed' version is the same as the original, but with a sleek, refined exterior

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Once the glue is dry, you can remove the bands, and give the puzzles some good twists to rub off any excess E6000 between the faces.

That's it. The Donut Factory is complete!

---

**_Sources for Non-printed Parts_**

**24mm 2x2x2 Cube**
- [Eastsheen Mini 2x2 Keychain Cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889)

**14mm no hole ABS beads**
- [eBay](http://bit.ly/PuzzleBeads)

**or these Chinese Checkers Beads on**
- [Amazon](https://amzn.to/3byXlsV)

**6mmx3mm Neodymium magnets**
- [eBay N52](https://ebay.to/3kMB1A4)*
- [eBay N35](https://ebay.us/iHdF18)
- [Amazon](https://amzn.to/3Qtm6f6)

*Since this puzzle uses so many magnets the N35 strength ones are sufficient. N52 might be slightly overkill and pricey

**E6000 Craft Adhesive**
- [Amazon](https://amzn.to/3OHX22J)

**Silicone Bands for Assembly**
- [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6)

---

_Alright, get to work. These donuts aren't going to make themselves!_ Enjoy :)

Pumpkin Skull - Low Poly

Pumpkin Skull_Full_Low Poly.stl

Stepped Octasphericon (Single and Dual Color Versions)

sidea-solid.stl

Bat Skull - Low Poly

The Bat Skull in its minimalist low poly version is a mesmerizing fusion of darkness and geometry.

Sharp angles and haunting shadows bring an air of intrigue, while the simplicity of the design draws you in.

His spooky essence will add a touch of spine-chilling charm to your space.

It's the perfect blend of spooky and stylish, ready to cast its spell on anyone who gazes upon it! 🦇💀
⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #randomizy when sharing your video)_**

⸻⸻⸻⸻⸻⸻⸻⸻

𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_** https://than.gs/u/296962?plans=true

⸻⸻⸻⸻⸻⸻⸻⸻
**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

Bat Skull_Low Poly.stl

Textured Snell the Snail

single-textured.stl

Hooman Googly Eyes

lashes.stl

9 Groove Sphericon (Single and Dual Material)

sidea-single.stl

Snell ( the Snail )

single-snell.stl

Chromatic Split Vase

monochromatic-bvase.STL

Filament spool keyring

Filament Spool Keyring

Ork Fighter - Full Colour Miniature - D&D

want to learn how to make models like this? check out the video
https://youtu.be/cc8p4dHNYdw

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Trippy Colour Lithophane

white1.stl

Bat Skull

Caves are one of the most fascinating natural places around the world and they're the abode of a large number of animals.
The most famous one is certainly the bat 🦇
For this reason, if you want to explore these places, you might end up finding a lot of these Bat Skulls scattered all over the cave.

**Do you think you'd be brave enough to venture? Or are you scared by it?** 🦇💀

⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #randomizy when sharing your video)_**

⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/RandomizY

Large Tulip Bowl - includes AMS files

Large Tulip Bowl.stl

Colourful Butterfly

A butterfly to celebrate colour swaps, or use a dual-extrusion filament and have fun! 

The butterflies can be up sized or reduced in your slicer! Play with your X and Y!


💜🌟🦋 I love hearts and stars, a 90s kid vibe! 💜🌟🦋

Makerdeck Mesmerizer

PRINT IN PLACE THREADED LOCKING VALENTINES DAY HEART BOX WITH A TWIST! 

Geared Heart File.3mf

COLOR

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pikachu Sleeping - 3MF Colour Print - Pokemon - Fan Art

Spider Gwen - 3MF Full Color - Fan Art

Color Pencil Box

View 78 new models

Pumpkin Skull - Low Poly

View 18 new models

Bat Skull - Low Poly

View 21 new models

View 20 new models

View 66 new models

View 111 new models

View 72 new models

Filament spool keyring

Ork Fighter - Full Colour Miniature - D&D

Trippy Colour Lithophane

View 18 new models

Large Tulip Bowl - includes AMS files

Colourful Butterfly

View 19 new models

PRINT IN PLACE THREADED LOCKING VALENTINES DAY HEART BOX WITH A TWIST!