#pdo | Aadhav Prabu Custom Iron Man Helmet v57.stl

Chunky the Doll - Child's Play Chucky Kit | No Supports, No AMS, No Glue

Chunky 3MF (For Bambu Printers).3mf

Skull Bloom Sculpture - Unique Gothic Art

Skull-flower.3mf

Articulated Bearded Dragons | Pre-Painted + Optional 8mm Glass Eye Version

BEARDED_DRAGON GLASS EYES PAINTED 1.3mf

PIXEL ART CHAINMAIL - FABRIC MATS CUSTOMIZATION

FABRIC MAT (215mm x 215mm).stl

MCM Incense Fireplace

Base.stl

Halloween Ghost Duck

halloween-ghost-duck.3mf

Articulated Print in Place Dragon Rockscale

Articulated Dragon Rockscale Mesh Mayhem.3mf

1x1x1 - Simple Walls - Standard Click-In Multibin Shell Extension

1x1x1 CU - Simple Walls - Standard Click-In - Loose.stl

Kuiil Bust (Pre-Supported)

KuiilBust.stl

Gnome Christmas Countdown 

Gnome-XmasCountdown.stl

Bad Kuchi Kopi

**Bad Kuchi Kopi from Bob's Burgers.**  

This is a single-piece version of Louise's favorite night light.  So far I have created the normal version ([Good Kuchi Kopi](https://social.thangs.com/m/65498)) and the melted version (Bad Kuchi Kopi), both versions are support free.

**Printing Info:**		
**These are just the settings I used to test the model, feel free to use whatever settings work best for you.
**FDM or Resin:** FDM 
**Scaling:**	Scale the single-piece version as big or as small as you would like.
**Supports:** None
**Infill/Perimeters:** I just used 10% infill with 2 perimeters, but I would use extra perimeters for more strength.
**Nozzle Size:** 0.4
**Layer Height:** 0.2

**Printing & Assembly**					
- This model is support free and you can paint it afterwards. I printed mine in green, then painted the eyes white and the pupils black to match the show.

**This design is uploaded with a non-commercial license. Downloading this file does not grant you the right to sell commercially.

If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D

Puzzle Cube.step

16x16 MU - Top Left Grid Interfitted - MultiBoard Octagon Plate

16x16 Top Left Corner - Multiboard Border Tile.stl

3DL Shark

3DL_Shark.stl

Print-in-Place Folding Scalpel

Folding Scalpel 1v00 3d045.stl

Death Predator Mask

Door stop

**A door stop that you can hang on the door handle when you do not need it without blocking the lock.**
It is flexible and locks under the door when you push it down with your foot.

Size: 20 x 40 (height) x 120 mm
This is the V2
Don’t forget to post your makes!

**Print settings**
Required build volume: 20 x 40 x 120 mm
Material usage: 11g
Print time: 1h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 30% - or more if you want it to be less flexible
Build plate adhesion type: none, if you have bed bad adhesion then a brim 
If you experience any problems, please feel free to contact me on twitter or Instagram

Sailboat Small

Sails MINI.stl

MINI PNP Vice - Heavy Version

**Print-in-Place Mini Vice** 
_Heavy Duty Version_

This version is similar to the [original]( https://social.thangs.com/m/37017) but the weight saver holes have been removed so that it’s a little stronger and easier to print. The knob on the hand wheel is also now solid, instead of rotating. 
___

**Description**
This mini vise prints vertically as one piece using no supports. There are small pads on the moving jaws that reduce the clearance required in order to print it in place.  The risers under the vise allow the handwheel to be turned while sitting on a flat surface. The knob on the hand wheel should swivel as well.  The jaws are 64mm wide and  open to 80mm.  It has an overall printing height of 164mm.

**Print Instructions**
The moving jaws form on top of the serrations of the stationary jaw and as a result it’s important that you use a .4mm nozzle x .45mm line width, and .2mm layer heights if printing at 100%.  To free the jaws after printing I pried slightly with a screw driver on each side of the jaws before opening it with the screw.
___
**Support and Licensing**
If you would like to help support more free models, or gain permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


C

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

#pdo | Aadhav Prabu Custom Iron Man Helmet v57.stl

Chunky the Doll - Child's Play Chucky Kit | No Supports, No AMS, No Glue

Skull Bloom Sculpture - Unique Gothic Art

Articulated Bearded Dragons | Pre-Painted + Optional 8mm Glass Eye Version

PIXEL ART CHAINMAIL - FABRIC MATS CUSTOMIZATION

MCM Incense Fireplace

Halloween Ghost Duck

Articulated Print in Place Dragon Rockscale

1x1x1 - Simple Walls - Standard Click-In Multibin Shell Extension

Kuiil Bust (Pre-Supported)

Gnome Christmas Countdown

Bad Kuchi Kopi

Puzzle Cube.step

16x16 MU - Top Left Grid Interfitted - MultiBoard Octagon Plate

3DL Shark

Print-in-Place Folding Scalpel

Death Predator Mask

Door stop

Sailboat Small

MINI PNP Vice - Heavy Version