CR2032 Battery Container

CR2032 Battery Carrier.stl

Remix of Xbox One Controller Stand

Introducing our latest design - an Xbox controller stand with an integrated battery holder! Keep your gaming space organized and your controller always charged with this sleek and functional design.

Xbox One Controller Stand

X-wing Battery Holder

Small desktop battery holder shaped like an X-wing. Keep up to 11 batteries handy in this Star Wars inspired holder. 

Keep up to 4 - AAA, 4 - AA, 2 - C, & 1 - 9 Volt battery handy on your desk with this X-wing battery holder.

Should print on its back without supports.

Pirate Treasure Chest for AA-AAA Batteries

TreChest_AA_all.stl

Sony Battery Holder x4 (NP-FW50)

Holds 4 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long. Also check out my 6 battery version.

NOTE: Works with Sony A7,A7II and other Sony products that use the NP=FW50 Battery.

**PRINT SETTINGS:**
PLA
0.2mm height
No Supports required



Remixed: https://www.thingiverse.com/thing:2567512 adding 4 batteries, made it stronger in almost every way, fast/easy push battery release, added logo text.



Battery Holders

AAA Containter.STL

AEG 58V battery holder

AEG 58V battery holder v1.0.stl

18650 Springy Battery Holder

18650_clip_length.stl

Battery Dispenser Box with battery Icon

battery_dispenser_case.stl

Milwaukee M12 Drill and Driver Insert V4.stl

RYOBI 18V Battery for MultiBoard

RYOBI 18V Battery Holder for MultiBoard.step

Minimal 18650 Holder

18650 lithium cells are great - high capacity, higher voltage and current than household batteries. But you don't want to just throw a lithium battery in to your bag because they can be a fire risk if shorted.

I saw a simple 18650 holder that was two caps that were held together with elastic bands (https://thangs.com/designer/Nf1nk/3d-model/18650%20holder%20%281%29.stl-861781). However, I also have 21700 batteries, and this one wouldn't work with those. So I whipped up a simple FreeCAD project that could be easily modified for most common sizes.

Print two and insert up to three 18650 batteries. Secure the two caps with hair elastics.

The original had no license specified. It's a pretty trivial object so do with it what you will. I am also uploading a version for 21700 batteries.

SORTSET Milwaukee Battery M12 Wall Mount

Milwaukee Battery M12 48-11(2401,2402) Wall Mount ANGLED.3mf

Minimal 21700 Holder

Lithium cells are great - high capacity, higher voltage and current than household batteries. But you don't want to just throw a lithium battery in to your bag because they can be a fire risk if shorted.

I saw a simple 18650 holder that was two caps that were held together with elastic bands (https://thangs.com/designer/Nf1nk/3d-model/18650%20holder%20%281%29.stl-861781). However, I also have 21700 batteries, and this one wouldn't work with those. So I whipped up a simple FreeCAD project that could be easily modified for most common sizes.

Print two and insert up to three 21700 batteries. Secure the two caps with hair elastics.

The original on Thangs had no license specified. It's a pretty trivial object so do with it what you will. I am also uploading a version for 18650 batteries.

Oculus Quest V2 battery holder

OC2 battery holder V2.1.stl

MBKing M18 Battery Holder - Terminal Protection

MBKing_M18B_NoSupport_V1.stl

oculus quest 2 front battery holder

Link to battery holder V2 with a more secure design and less "moment" weight so it feels lighter than V1: https://thangs.com/mythangs/file/488533

this is a remix and my first design so that you can have a power bank plugged into the oculus while playing, since my power bank has a built-in USB-C cable

The dimensions of the hole for the power bank are 140x21mm big with a little wiggle room for ease of use, if the 140mm direction needs to be bigger or smaller you can go into cura and make a support blocker over the hole, highlight the support blocker and go to "per model settings" and in the modify settings go to infill settings only and adjust the "horizontal expansion" setting.

there are clips on the 3d design to clip onto the vent gap, but if your clips don't print well like mine, use some double sided tape, rubber bands or string to keep it in place, where string would be the best choice for a permeant solution, and the tape and rubber bands for a temporary solution.

if you want the same power bank i have you can buy it from this amazon link:
https://www.amazon.co.uk/gp/product/B097819MNF/ref=ox_sc_act_title_1?smid=A3H4EX84EP2E60&psc=1

If you would like to support me and help me buy more filament so I can test and make more designs, you can send money via paypal through this link: https://www.paypal.me/GeorgeElliott11

Stanley Battery Holder.stl

**SUPPORTS REQUIRED**
This is another battery holder that I made (maybe I should see how many different brands I can make?) This time it's Stanley. supports required for the middle bit on some printers. 
and as always, happy printing.

VR battery holder [!UPDATED!]

Have vive pro and the battery connector slowly died out on me so after  eventually getting another battery (VRULC t2055) that was 20,000mah (bit bigger than the original) i Was set out on a journey to somewhat recreate the vive battery waist holder thingy so this is basically that but for a bigger battery. use 2x 2.5m screws and nuts to hold plastic retainters in to hold the battery in. pause the print at layer 596 (easiest to do in slicer software) [test it at the 2nd layer hieght just in case]   AFTER YOU HAVE CORRECTLY PAUSED IT... insert hex nuts in the holes at the side. i used a soldering iron at its lowest setting (210C) to snugly ensure the went in smooth and straight and tight. unpause printer and allow it to print over top. add the bolts later. the back clip is somewhat fragile (hasnt broke yet after a few drops [PLA] )and make sure it is properly supported when printing. if not it will move forward and back and its not gud at all.

:)

VR battery holder.stl

SORTSET RYOBI 40V Battery Holder Wall Mount

Ryobi 40V Battery Holder Wall Mount.3mf

Battery holder

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

CR2032 Battery Container

Remix of Xbox One Controller Stand

X-wing Battery Holder

Pirate Treasure Chest for AA-AAA Batteries

Sony Battery Holder x4 (NP-FW50)

Battery Holders

AEG 58V battery holder

18650 Springy Battery Holder

Battery Dispenser Box with battery Icon

Milwaukee M12 Drill and Driver Insert V4.stl

RYOBI 18V Battery for MultiBoard

Minimal 18650 Holder

SORTSET Milwaukee Battery M12 Wall Mount

Minimal 21700 Holder

Oculus Quest V2 battery holder

MBKing M18 Battery Holder - Terminal Protection

oculus quest 2 front battery holder

Stanley Battery Holder.stl

VR battery holder [!UPDATED!]

SORTSET RYOBI 40V Battery Holder Wall Mount