My replica Astro Blaster is inspired by Power Rangers in Space and just like in the show, the blaster can detach into two parts for dual blaster mode.

Build Video:https://youtu.be/9-b_Rtv8mP8

Connect version measurements:
Main Blaster Length:26.10cm
Main Blaster Height:18.04cm
Main Blaster Width: 4.73cm

Secondary Blaster Length:23.8cm
Secondary Blaster Height:11.20cm
Secondary Blaster Width:3.75cm

Astro Blaster Set – Includes both:
A connect version - that attaches to other Space Ranger weapons to form the combined blaster mode.

A standalone version -of the Astro Blaster that does not connect, perfect for display or cosplay on its own.

Scale Info:
The standalone version is 15% smaller for easier handling or display.
You can scale up the standalone version to fit your needs. 

Print Settings:
Layer height: 0.16 - 0.2mm
Walls: 2 - 3
Supports: Yes
Infill: 10% - 15%
Brim: (optional)
If any objects appear too small when sliced, try scaling to 1000%for full-size cosplay builds.

Whether you're printing for cosplay, display, or just for fun, each part is crafted for detail and modular connection. When combined, the weapons transform into the iconic versions from the show.

Thanks for supporting MrCampbellPrints — more awesome builds coming soon!

🔗 Be sure to tag me if you build this!
📸 Instagram: @MrCampbellPrints
🎥 YouTube: MrCampbellPrints

Power Rangers in Space - Astro Blaster

Connect All Parts.stl

This release includes the ship with full cockpit interior and all weapon accessories in 1/48 and 1/72 scale. 

The length in 1/48 scale is 373.5 mm (14.705 in)
The length in 1/72 scale is 249 mm (9.803 in)

All parts are optimized for resin printing.
Pre-supported STL files and Lychee Slicer Scenes for resin printing are included for both scales.


**Notes for assembly 1/48 scale**
The ship has a recess for a M6 nut on the bottom.
M6 Nuts: https://amzn.to/42J9tkB

The Gatling Guns and the Gatling Gun Hatches have recesses for Magnets to swap them out.
Magnets 5x1mm: https://amzn.to/418CW6S

The Bottom Gun and Bottom Gun Hatch have recesses for Magnets to swap them out.
Magnets 3x1mm: https://amzn.to/42QLAb5
The Bottom Gun comes in two versions. One solid and one hollow for LED lighting (1.5mm LED, holes for cable routing must be drilled)

The Canopy can be printed with or without glass.


**Notes for assembly 1/72 scale**
The ship has a recess for a M3 nut on the bottom.
M3 Nuts: https://amzn.to/4jSBEES

The Gatling Guns and the Gatling Gun Hatches have recesses for Magnets to swap them out.
Magnets 5x1mm: https://amzn.to/418CW6S

The Bottom Gun is too small for magnets. Therefore, you need to use double-sided tape (or similar) in order to swap the parts.
The bottom gun comes in two versions. One solid and one hollow for LED lighting (1mm LED, holes for cable routing must be drilled).

The Canopy can be printed with or without glass.


If you still need a good slicer for resin printing, I recommend Lychee Slicer:
https://lychee.co/pricing-and-subscription?utm_source=affiliae&utm_campaign=lychee&utm_medium=NerdMaker&ae=55 *


**Info**
Min. required printer build volume: 192x120x200 mm (WxDxH)
Print the wings and the fuselage with engineering resin (or similar that has little to no flex) to prevent any sagging. Don’t use an ABS-like resin.
Cure the wings and the fuselage very thoroughly immediately after printing for at least 20-30 minutes (washed of course).

My resin recommendation: https://amzn.to/454ywQd

For assembly guidance I recommend to import all STL files in Fusion. Then you can see the entire model in 3D, hide/show every part and see exactly where every part goes. An instruction how to do that and a color guide are included in the download.


**Join the NerdMaker Community**
[YouTube](https://www.youtube.com/@DominicSchwarz?sub_confirmation=1)
[Twitch](https://www.twitch.tv/nerdmaker86) 
[Discord ](https://discord.gg/9jppu3AxJK)
[Instagram ](https://www.instagram.com/nerd_maker_engineer)
[Facebook ](https://www.facebook.com/nerdmakerengineer)


**License**
A Commercial License, to sell 3D-Prints of my Models, is available here:
[Patreon ](https://www.patreon.com/NerdMaker)



All amzn.to links are Amazon Affiliate links. As an Amazon Associate I earn from qualifying purchases. The price will stay the same for you of course!
*This is an affiliate link. If you purchase the Plus or Library license via this link, I get a small commission from Lychee. The price will stay the same for you of course!

Bandai

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Power Rangers in Space - Astro Blaster

Model-T Avenger - 1-48 and 1-72 scale