The original meaning of Easter is also important, but most people think of eggs and rabbits at Easter. And also, ordinary people think that small sharing with neighbors is a day that brings joy. I designed a rabbit piggy bank with these two things. You can also put coins in this piggy bank, but you can also put small snacks as a gift.
Even if it's not Easter, the piggy bank is still valid. Although there has been a lot less use of coins, there are still many places and areas where coins are used.
So I designed a rabbit piggy bank. Easy to fold, easy to insert and take out coins.

The size of the coin hole is designed to accommodate 25 cents of US coins. It is large enough to fit most national coins.

https://youtu.be/G-jtFxuM-Lc

I hope you will remember the preciousness of small money and the joy of sharing through this piggy bank.

Size, X 76mm, Y 124mm, Z 105mm

Design by GOODesign

Easter bunny bank(Foldable)

GOODesign_Foldable_Bunny_Bank.stl

**The complete Zootropolis character collection — 12 chibi-style figurines ready to print at home.**

Zootropolis - Complete Character Collection
12 print-ready STL files from the beloved Disney animated movie
Main Characters: Judy Hopps, Nick Wilde, Chief Bogo, Mayor Lionheart, Dawn Bellwether, Mr. Big, Finnick, Clawhauser
Supporting characters included

Specs:
10cm chibi style figurines
Pre-tested STL files
Resin and FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Zootropolis fans, Disney collectors, and 3D printing enthusiasts.**

Zootropolis Characters STL Files | Kids Cartoon 3D Print Collection

Character_6.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 52 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** I have prepared data with two types of rabbit patterns separated by color. You can choose your favorite rabbit pattern. The two rabbits have exactly the same pieces.
Please print ‘rabbit_primary_color.stl’and‘rabbit_secondary_color.stl’or‘Dutch_rabbit_primary_color.stl’and‘DDutch_rabbit_secondary_color.stl’.If you feel the adhesion to the bed is weak, I recommend adding a brim. No support is needed. 

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Rabbit Magnet Puzzle (No supports, no AMS)

low_poly_rabbit_figurine.stl

**Introducing the articulated Bunny Rabbit!!**

**_UPDATED: Multicolor 3MF files now included!_**

I'm excited to share this new design! This is 100% Print-in-place, where one body part pre-supports another as it builds upwards. No additional supports needed! Once printed, you just have to wiggle the joints to break the small contact points and free up the articulation (see video).

Please watch This Video on the best way to free up the joints after printing! Be use extra care when printing in more brittle filaments like silks. Please use 3 walls if you use a 0.4mm nozzle! 

Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

**Printing Details**
-Print-In-Place. No additional supports needed. Several joints must be wiggled and "cracked" free in order to articulate them. Be Extra careful with brittle filaments, like silks
-Pre-supported version included for extra print stability (recommended). Support is connected to the front legs that must be removed and discarded.
-Multicolor 3MF: Compatible with PrusaSlicer and Bambu Studio
-15%-20% Infill.
-3 Walls when using a 0.4mm nozzle <--This is very important!
-Please watch This Video on the best way to free up the joints!

This model has been successfully printed down to 50%. Below that the joint function may start to become compromised. YMMV

BUNNY

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Easter bunny bank(Foldable)

Zootropolis Characters STL Files | Kids Cartoon 3D Print Collection

Low Poly Rabbit Magnet Puzzle (No supports, no AMS)

Bunny Rabbit - Articulated Figure