Embark on a morphinominal journey with my 3D printed Mighty Morphin Power Rangers Power Bow! This life-sized 1:1 scale replica pays tribute to the iconic weapon wielded by Kimberly, the Pink Ranger.

Build Video:
https://www.youtube.com/watch?v=JSQLWwm2xGI

There are 2 models for the bow  ends  one witha hole to add a bow string and one without 

3D PRINTING SETTINGS
Layer height: 0.16 - 0.2mm
Walls: 2
Supports: Yes
Infill: 10% - 15%

Follow me on social media:
https://www.instagram.com/mrcampbellprints
https://www.tiktok.com/@mrcampbellprints
https://youtube.com/@MrCampbellPrints

Scale: 1:1 (Life-sized replica)
Bow Lenght:98cm
Bow Height:4.5cm
Bow Width:20cm

Arrow Lenght:76cm
Arrow Width Fin to Fin:10cm
Arrow Width Shaft:1.7cm

This Power Bow replica is perfect for Power Rangers enthusiasts, cosplayers, or collectors looking to own a piece of the legendary series. The bow is carefully designed capture every detail of the original weapon, from the graceful curves to the powerful design.

Pink Ranger Power Bow with Arrow- Mighty Morphin Power Rangers

All Parts.stl

Unleash the power of Donatello's iconic Bo Staff from Teenage Mutant Ninja Turtles! This life-sized 1:1 scale replica is a meticulously crafted homage to the iconic weapon wielded by Donatello.

Build Video:
https://youtu.be/QTSDISMl-ms

Recomended Print settings:
infill: 10%
Layer Height 0.16mm
support: Yes
Brim: depends on your printer adhersion(i did use brim)

Scale: 1:1 (Life-sized replica)
Length:200cm

Donatello's Bo Staff - Teenage Mutant Ninja Turtle - 1:1 Scale

Donatello Bo Staff.stl

Looking for a cute way to frame your Instax photos? Meet the Coquette Bow Photo Holder. It is perfectly sized for Instax Mini film prints and super quick to print with no AMS or supports required. Go from slicer to shelf in no time, then pop in your favorite snaps to brighten up your desk, bookshelf or bedside table.

**No AMS needed!**

**Print Settings**
- No brim needed
- No supports needed
- 45% infill
- 2-3 walls
- 0.4 mm nozzle
- .12mm layer height
- See .3mf file for part orientation

**PLA Used:**
- Jelly Red: https://amzn.to/4jlO34i or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-jred
- Blush Pink: https://amzn.to/4lEBnad or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-blpnk
- Vivid Tangerine: https://amzn.to/42Towtk or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-vtan
- Cantaloupe Orange: https://amzn.to/42sPcRm or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-corn
- Matte Orange: https://amzn.to/3YhBrT5 or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-orn

**Assembly Video:** 
https://youtu.be/qvyANmkL8zE

Coquette Bow Photo Holder - For Instax Film, Desk, Shelf, Table Display, Photo Frame,

pixelandpapier__bow_photo_holder__front.stl

Unleash the power of the Pink Ranger with my Pink Ranger Turbo Wind Fire (Bumper Bow) This life-sized replica is a meticulously crafted homage to the iconic weapon wielded by , the Turbo Pink Ranger.
The five Turbo Weapons put together into The Turbo R.A.M (Robotic Arsenal Mobilizer)

If file comes out small please scale to 1000%

Build Video: https://youtu.be/cT7QX6cq0ls

Follow me on social media:https://www.instagram.com/mrcampbellprintshttps://www.tiktok.com/@mrcampbellprintshttps://youtube.com/@MrCampbellPrints

Scale: 1:1 (Life-sized replica)Height : 5cmLength : 60cmWidth : 23.5cm

This Pink Ranger Turbo Wind Fire (Bumper Bow) replica is perfect for Power Rangers enthusiasts, cosplayers, or collectors looking to own a piece of the iconic series. It captures every detail of the original , from the intricate habdle to the powerful Bow tip.

3D printing settings

Layer height: 0.16 - 0.2mmWalls: 2Supports: YesInfill: 10% - 15%Brim: yes (for handle)

Power Rangers Turbo - Pink Ranger Turbo Wind Fire (Bumper Bow)

All Parts Pink Ranger Turbo Wind Fire (Bumber Bow).stl

Turbo Ram Connectors .stl

This is a digital 3D printable model of **Kindred’s Bow** from **League of Legends**.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.

**SIZE**
At 100% scale, the model’s dimensions are approximately:
**Width** 60 mm
**Length** 1215 mm
**Height** 377 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. Explore more of our creations on Thangs and join our membership for exclusive access to our incredible library of models! 
Follow and tag us on [social media](https://3d-mon.com/links/) to stay in touch! 

BOW

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pink Ranger Power Bow with Arrow- Mighty Morphin Power Rangers

Donatello's Bo Staff - Teenage Mutant Ninja Turtle - 1:1 Scale

Coquette Bow Photo Holder - For Instax Film, Desk, Shelf, Table Display, Photo Frame,

Power Rangers Turbo - Pink Ranger Turbo Wind Fire (Bumper Bow)

Kindred Bow - League of Legends