Flexi Phoenix

phoenix body 2 (1).stl

Monster Energy Toxic Waste Can Cup

BARREL.stl

Bat Wing Coaster Holder

Bat wings coaster holder.3mf

Hoopoe

Full.stl

3DL Cockatoo

cockatoo_3.stl

Geometric eagle wall art

geometric-eagle_full.stl

Not So.. XL April showers Goose, for smaller build plates, below 300x300x300

Not So XL April showers Goose.3mf

Canary Bird Mandala Art – 2D geometric wallart (Stained Glass Style)

canary.stl

Love birds + friends

Cockatiel_flexi_keychain.stl

Duck Foot Splint v1

Duck Foot Splint v1.stl

Birdhouse 

Bird House with Perch Plated.3mf

Raven Skull (Pre Supported)

Raven_Skull_Top.stl

Penguin Poppers Multi-Pack

Base - Penguins Feets.3mf

Canadian Plague Doctor Goose

Plague Doctor Goose_Standing.stl

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

BIRD

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Flexi Phoenix

Monster Energy Toxic Waste Can Cup

Bat Wing Coaster Holder

Hoopoe

3DL Cockatoo

Geometric eagle wall art

Not So.. XL April showers Goose, for smaller build plates, below 300x300x300

Canary Bird Mandala Art – 2D geometric wallart (Stained Glass Style)

Love birds + friends

Duck Foot Splint v1

Birdhouse

Raven Skull (Pre Supported)

Penguin Poppers Multi-Pack

Canadian Plague Doctor Goose

Yeah, Another christmas Ball

Flexi Eagle

Flexi Parrot Toy - Articulated Cute Bird

Who's Hoot

Baby Flexi Phoenix Keychain

Flexi Cardinal Bird