Milwaukee M12 Drill and Driver Insert V4.stl

oculus quest 2 front battery holder

Link to battery holder V2 with a more secure design and less "moment" weight so it feels lighter than V1: https://thangs.com/mythangs/file/488533

this is a remix and my first design so that you can have a power bank plugged into the oculus while playing, since my power bank has a built-in USB-C cable

The dimensions of the hole for the power bank are 140x21mm big with a little wiggle room for ease of use, if the 140mm direction needs to be bigger or smaller you can go into cura and make a support blocker over the hole, highlight the support blocker and go to "per model settings" and in the modify settings go to infill settings only and adjust the "horizontal expansion" setting.

there are clips on the 3d design to clip onto the vent gap, but if your clips don't print well like mine, use some double sided tape, rubber bands or string to keep it in place, where string would be the best choice for a permeant solution, and the tape and rubber bands for a temporary solution.

if you want the same power bank i have you can buy it from this amazon link:
https://www.amazon.co.uk/gp/product/B097819MNF/ref=ox_sc_act_title_1?smid=A3H4EX84EP2E60&psc=1

If you would like to support me and help me buy more filament so I can test and make more designs, you can send money via paypal through this link: https://www.paypal.me/GeorgeElliott11

VR battery holder [!UPDATED!]

Have vive pro and the battery connector slowly died out on me so after  eventually getting another battery (VRULC t2055) that was 20,000mah (bit bigger than the original) i Was set out on a journey to somewhat recreate the vive battery waist holder thingy so this is basically that but for a bigger battery. use 2x 2.5m screws and nuts to hold plastic retainters in to hold the battery in. pause the print at layer 596 (easiest to do in slicer software) [test it at the 2nd layer hieght just in case]   AFTER YOU HAVE CORRECTLY PAUSED IT... insert hex nuts in the holes at the side. i used a soldering iron at its lowest setting (210C) to snugly ensure the went in smooth and straight and tight. unpause printer and allow it to print over top. add the bolts later. the back clip is somewhat fragile (hasnt broke yet after a few drops [PLA] )and make sure it is properly supported when printing. if not it will move forward and back and its not gud at all.

:)

VR battery holder.stl

SORTSET Milwaukee M18 Battery Mount for Multiboard

SORTSET Milwaukee M18 Battery Holder for Multiboard.stl

SORTSET RYOBI 40V Battery Holder Wall Mount

Ryobi 40V Battery Holder Wall Mount.3mf

Battery Holder for RaGG-e Whoop frame

9V Battery Holder for Multiboard

9V Battery Holder.STL

SORSET DeWalt 20V Max Battery Holder for Multiboard

SORTSET DeWalt 20V Battery Holder for Multiboard.stl

SORTSET RIDGID 18V Battery Mount for Pegboard

SORTSET RIDGID 18V Battery Mount.3mf

SORTSET Milwaukee Battery M18 Wall Mount

Milwaukee Battery M18 Wall Mount.3mf

AAA Battery Case Set

AAA_NEW.STL

SORTSET DeWalt 20V Max Battery Holder.stl

Dyson V8 Quick-Swap Battery Clip – Tool-Free Upgrade | Fast Battery Change Adapter

DysonV8Clip.STL

The Battery Buddy - Turn AA Batteries Into Fun Desk Buddies!

Battery with legs holder.stl

Radioactive barrel battery holder

Container.stl

SORTSET RIDGID 18V Battery Mount for Multiboard

SORTSET RIDGID 18V Battery Mount for Multiboard v2.step

Gamer Vape Pen Battery Holder

Necklace 510 cart holder 12 12 2024 111222 v2.3mf

BATTERY HOLDER

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Milwaukee M12 Drill and Driver Insert V4.stl

oculus quest 2 front battery holder

VR battery holder [!UPDATED!]

SORTSET Milwaukee M18 Battery Mount for Multiboard

SORTSET RYOBI 40V Battery Holder Wall Mount

Battery Holder for RaGG-e Whoop frame

9V Battery Holder for Multiboard

SORSET DeWalt 20V Max Battery Holder for Multiboard

SORTSET RIDGID 18V Battery Mount for Pegboard

SORTSET Milwaukee Battery M18 Wall Mount

AAA Battery Case Set

SORTSET DeWalt 20V Max Battery Holder.stl

Dyson V8 Quick-Swap Battery Clip – Tool-Free Upgrade | Fast Battery Change Adapter

The Battery Buddy - Turn AA Batteries Into Fun Desk Buddies!

Radioactive barrel battery holder

SORTSET RIDGID 18V Battery Mount for Multiboard

Gamer Vape Pen Battery Holder