Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

Chicken Nugget 

This is a 3D printable chicken nugget model. Perfect for any nuggie lover who wants their favorite food to be forever immortalized in plastic. If you like this model, you can check out my profile for my Chicken Nugget earrings, keychain models, and all my other great designs. GIve me a follow to be notified when new designs drop.

Print Settings:
Print Settings:
Enable Fuzzy Skin (I used default bambu slicer settings for this)
.1 - .2 mm layer height
no supports
15% - 25% infill

Chicken Nugget Keychain

This a version of my chicken nugget model that has been modified to be a keychain. That way, any nuggie lover can take their favorite food item on the go (without the messiness that one might experience doing the same with a normal nugget). If you like this model, you can check out my other nugget-themed models on my profile and follow to be notified when I drop new designs.

Print Settings:
Enable Fuzzy Skin (I used default bambu slicer settings for this)
.1 - .2 mm layer height
no supports
15% - 25% infill

Chicken Nugget Earrings

This is a set of earrings for any chicken nuggie lover. Gone are the days when nuggies could only be eaten; now you can wear them, and if you like these models, you can check out my chicken nugget keychain and plain chicken nugget models on my profile.

Print Settings:
You will need to enable fuzzy skin in your slicer, I used the default settings in Bambu slicer to get the result seen in the photos

.08 - .12 mm layer height
No supports
Lay flat face on the bed

Cyborg Girl - Hueforge Print

Flat Rose Keychain

flat rose keychain.stl

White Wolf - Hueforge Print

Flower Puck

This model is a blooming flower cut down into a puck form. This is for anyone who did not like my taller version of this flower model. It's a great decorative piece for a flower lover and looks great in a dichromatic filament.

Flower Puck.stl

Decorative Flower

This is a model of a blooming flower. It's a great decorative piece for flower lover and looks great in a dichromatic filament.

Print Settings:
.1 - .15 mm layerheight
no support
15 - 25% infill

Empire State Art Deco Mosaic HueForge 

Empirepezliz_Front_107x175_S.stl

Star Wars (Inspired) "Ana-pumpkin Skywalker" HueForge Darth Vader Helmet

As a young slave on the desert planet of Tatooine, Anakin discovered his fascination with pumpkins during a rare visit to the local market. He was captivated by their vivid color, unique shapes, and the joy they seemed to bring to the people. It was a simple pleasure in a life filled with hardship, and he often dreamt of cultivating his own pumpkin patch someday.

As Anakin honed his skills with podracing and his prowess with the Force, he never forgot his dream of becoming a pumpkin farmer. When he met Padmé Amidala and fell in love, he shared his dream with her. Padmé, touched by his sincerity, supported his desire to have a peaceful life as a farmer after their turbulent adventures.

However, the Sith Lord Darth Sidious sensed Anakin's attachment to the idea of pumpkin farming and skillfully used it to manipulate him. Sidious convinced Anakin that his dreams of a simple life were unattainable within the Jedi Order, pushing him further toward the dark side. In this quirky alternate universe, Anakin's love for pumpkins became a symbol of his attachment, ultimately contributing to his transformation into Darth Vader.

As Darth Vader, he became known throughout the galaxy for his fearsome prowess and iconic helmet, which some cheekily noted bore a resemblance to the top of a pumpkin. Yet, deep within the black armor and behind the respirator's mechanical breath, there remained a trace of Anakin's dream of cultivating pumpkins, a reminder of the simple life he had once longed for but could never attain.

Sliced at .08mm in Bambu Studio:

Black to Layer 6
Translucent Orange to Layer 10
Opaque Orange to Layer 17
Cream to Top Layer

Small Jumping Spider

This is a smaller version of my jumping spider model for anyone who wants a little buddy to keep the other company. (He also looks super cute with the witch hat keychain on his head)

Print Settings:
.08 - .15 mm layer height
no supports
15 - 25% infill


Small Jumping Spider.stl

Cute Jumping Spider

Just a cute version of a jumping spider, perfect for fans of the eight-legged arachnid or as a seasonal decor piece.

Print Settings:
.1 - .2mm layerheight
no supports
AMS files are included for Bambu owners who want to print this in multi-color


Jumping Spider.stl

Angry Ghost wall art.stl

This is an angry ghost cartoon design.
Made to be printed with single extruder without an ams. 


Pumpkin Skull - Low Poly

Pumpkin Skull_Full_Low Poly.stl

FRESHENS Car Ornament

_OK_, your car smells _FINE_. That doesn't mean you can't do with some _FRESHENING_.

_FRESHENS_ keeps an eye on your car and it keeps you lookin _FRESH_.

_OK_, you can print it in PLA but it will warp on hot days. That's fine, _THINGS CHANGE_.

Witch's Hat

This model of a traditional witch's hat acts as a great aesthetic piece to have in the house for the Halloween Season. And the multi-color aspect of the hat can be achieved using layer swaps which means that no multi-color printer is needed, just two layer pauses and two filament swaps.

Print Settings:
No Supports
.1 - .15 mm layer height 
15 - 20% infill 
Scalable to whatever size suits your decorative needs


Wario - Super Mario Bros - Fan Art

Wario - Super Mario Bros - Fan Art

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Cute Cat Keychain

This fidget keychain has two spinning rings that spin perpendicular to each other, centered around a cute cat. (Ignore the labeling of the file. It is definitely a cat, not a bat that looks like a cat). You can achieve the two color looked seen in the photos with layer swaps, so there is no need for a multi-material printer.

Print Settings:
.1 - .15mm layer height
no supports
 raft optional
infill 15 - 25%

Art

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Chicken Nugget

Chicken Nugget Keychain

Chicken Nugget Earrings

Cyborg Girl - Hueforge Print

Flat Rose Keychain

White Wolf - Hueforge Print

Flower Puck

Decorative Flower

Empire State Art Deco Mosaic HueForge

Star Wars (Inspired) "Ana-pumpkin Skywalker" HueForge Darth Vader Helmet

Small Jumping Spider

Cute Jumping Spider

View 11 new models

Pumpkin Skull - Low Poly

View 18 new models

Witch's Hat

Wario - Super Mario Bros - Fan Art

Cute Cat Keychain