Point Crown // Lil'Hats'N'Stuff

crown-18mm.stl

Crown dragon hairpin 

Crab Earring

A small earring of a crab holding the loop for the earring hooks

Pi Pico Caddy [Snap-Fit + 2020 Connection]

Wall sword holder Bleach

base 1

bottle cages - rigid

anti ret. cagelogo.stl

Fully Printable Bottle Opener

This bottle opener, unlike other 3d printed ones that are designed to use coins or other metal objects to pry, is designed to function with plastic alone. 

Please leave comments, as I am trying to improve on the design.

Pokemon-Themed Roll-Up Ring TCG Playmat Holder

**:: POKEMON TCG ACCESSORY ::**

I needed a storage solution for my Pokemon **TCG playmats** - and here's the result! A _decorative **roll-up ring**_ for keeping your playmats snug & tight while not in use.


Feel free to **TAG US** in any post on social media! (**_TikTok, Instagram, Facebook_**)

**THIS MODEL IS NOT TO BE USED FOR COMMERCIAL USE IN ANY WAY, SHAPE, FORM, OR MANNER. THANK YOU & ENJOY!**

PLAYMAT ROLL-UP RING :: Pokemon | TCG | Accessories

Headphone Horns

A fun little accessory for your headphones, headband, or whatever.  Designed to hold a velcro strap to keep them in place.

Magnetic Front Plate - Bambu Lab P1P #ThangsBambuContest

DISPLAY_ONLY.stl

Horny Helmet | Motorcycle Accessory

Horn_L.stl

T-Handle Allen Wrench Holder Guides for Harbor Freight Pittsburgh Set Metric SAE Hex

Metric Guide.stl

End-Cap for 4040 V-Slot Bar

Customize your 3D printer with your favorite color.

Aplysina archeri

This coral model, belonging to the coral accessories collection, honours the species Aplysina archeri.

In it you can keep your bracelets, pendants, rings and at the same time decorate your home by immersing it in an underwater atmosphere.
(Apart from jewellery you can even use it as a vase).

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable. You can increase its size to be able to store even other accessories or use it as a vase.

I printed it with orange matte PLA with 15% infill and 0,2 mm layer height.

Porites furcata

This coral model, belonging to the coral collection for accessories, honours the species Porites furcata.

Honouring its family (finger coral), it is designed to store rings while decorating your home by immersing it in an underwater environment.

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable, although its size is correct for conventional rings.

I printed it with purple matte PLA with 15% infill and 0,16 mm layer height.

Acropora palmata

This coral model, belonging to the coral accessories collection, honours the Acropora palmata species.

In it you can leave your bracelets, pendants, rings and at the same time decorate your home by immersing it in an underwater atmosphere.
(Apart from jewellery you can leave your house keys, wallet...).

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable. You can increase its size to be able to store even other accessories.

I printed it with red matt PLA with 15% infill and 0,2 mm layer height.

VanMoof S3 Reflektorhalterung

Halterung für den Rückreflektor des VanMoof S3. Damit kann der Reflektor aus dem Lieferumfang an die Schrauben vom Schutzblech geschraubt werden

Shower-holder

showerholder

oculus quest 2 front battery holder

Link to battery holder V2 with a more secure design and less "moment" weight so it feels lighter than V1: https://thangs.com/mythangs/file/488533

this is a remix and my first design so that you can have a power bank plugged into the oculus while playing, since my power bank has a built-in USB-C cable

The dimensions of the hole for the power bank are 140x21mm big with a little wiggle room for ease of use, if the 140mm direction needs to be bigger or smaller you can go into cura and make a support blocker over the hole, highlight the support blocker and go to "per model settings" and in the modify settings go to infill settings only and adjust the "horizontal expansion" setting.

there are clips on the 3d design to clip onto the vent gap, but if your clips don't print well like mine, use some double sided tape, rubber bands or string to keep it in place, where string would be the best choice for a permeant solution, and the tape and rubber bands for a temporary solution.

if you want the same power bank i have you can buy it from this amazon link:
https://www.amazon.co.uk/gp/product/B097819MNF/ref=ox_sc_act_title_1?smid=A3H4EX84EP2E60&psc=1

If you would like to support me and help me buy more filament so I can test and make more designs, you can send money via paypal through this link: https://www.paypal.me/GeorgeElliott11

filament support.stl

Filament spool support. Fits Ender 3 Pro, sits at ground level to left of printer (support rod facing away from front).
5.75" height to center of holding rod. Holding rod is 1" across. Base is 4" wide.

ACCESSORY

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 111 new models

Crown dragon hairpin

Crab Earring

Pi Pico Caddy [Snap-Fit + 2020 Connection]

Wall sword holder Bleach

bottle cages - rigid

Fully Printable Bottle Opener

Pokemon-Themed Roll-Up Ring TCG Playmat Holder

Headphone Horns

Magnetic Front Plate - Bambu Lab P1P #ThangsBambuContest

Horny Helmet | Motorcycle Accessory

T-Handle Allen Wrench Holder Guides for Harbor Freight Pittsburgh Set Metric SAE Hex

View 40 new models

Aplysina archeri

Porites furcata

Acropora palmata

VanMoof S3 Reflektorhalterung

View 14 new models

oculus quest 2 front battery holder

filament support.stl