Thin Texture Roller (Low Resin Cost) – Rock Wall Or Path – 4.5 Inches Tall

HOW TO SUPPORT

Just add a thick line of light supports around the bottom of the roller, connecting to your raft of choice. It’s that easy.


WHY BUY MY ROLLERS?

My goal is to use as little resin as possible in my texture rollers. My design displaces a cylinder’s mesh on the outside and inside (inside displacement is reversed) to use as little unneeded resin as possible. My rollers are so thin that only around 15.5 milliliters are used, letting you save precious and overpriced resin.

You can also see the texture you’ll be rolling on the inside of the cylinder, letting you easily find the right roller in your collection.


PLEASE

Let me know if the roller breaks on you. I use elegoo space grey 8k resin, which has been holding up fine with my test prints but might be less sturdy with your resin of choice. Leave a comment and I will upload a thicker version to this creation.



3D Printer settings:

115 millimeters tall, 15.5 milliliters of resin used on average.

Print with supports! I use light supports and they come out fine. Please view the link in the description for an example of support placement. It’s incredibly easy.

Spooky house tea light decoration

Spooky house.stl

Printception Small Vase

small-vase.stl

12oz CAN Can Cup... 

12oz_Can_Can_Cup_V4.step

Pikmin - Sign

A sign representing the Pikmin Logo. designed to be hung on a wall.

Sega Saturn Sign

SegaSaturn-Logo1.stl

"Magic S" Printer Belt Tensioner

s-belt-tensioner.STL

XYZ_CallibrationCube.stl

This is a small and simple XYZ calibration cube for checking the dimensional accuracy of your printer.   The cube has X, Y and Z written along their respective axes.

Once printed either use an accurate ruler or callipers to measure the dimensions of the print. The original model size is 20mm*20mm*20mm however you may wish to resize it to be bigger (or smaller). 

Once you have measured your dimensions you may want to adjust the steps or steps per mm for each axis in your printers firmware - This may or may not be possible depending on your printer. 

To do this you will need to find your current Steps per mm, and then have your observed dimension and expected dimension.

To calculate the new Steps per mm you will need to do:

(Expected/Observed)*Current Steps per mm = New Steps per mm

It is also good as just giving a gauge of how well your 3D printer works with small over hangs and flat faces to check for Z-Banding or ghosting!

Manual Filament Feeder Extruder Gear Knob Mod for CR-10 and other Bowden 3D Printers

extruderknob-v2.stl

#061 Poliwhirl Pokemon Wiremon Figure

🔥Looking for a unique home decor item that will make a statement in any room?🔥 Check out our #061 Poliwhirl Pokemon Wiremon Figure! This digital template allows you to print your own Poliwhirl figure with a stunning wire art design. 🌟Each figure is crafted with incredible attention to detail, bringing out the unique features of this classic Pokemon character.🌟 Whether you're a fan of the Pokemon franchise or simply appreciate beautiful home decor, this figure is sure to impress. 🤩Print it in your favorite color or finish to perfectly match your personal style.🤩 Get your hands on this incredible wire art Pokemon figure today!

Small Spatula

A small spatula that I use to remove the supports from my 3D printed resin objects. 


Cave Entrance

Gracewindale-cave-entrance-tree-doorway.stl

Hydrometer and Desiccant Stand for Bambu Lab X1, AMS, Tool Storage

hydrometer and desiccant stand

Remove Before Print 

removebeforeprint_full.stl

THE WALL OF 3D PRINTING

you can use screws or just tape to attach it as i did 

Valentine's Multicolor Multipart Dropy

Body_Dropy_Frikarte3D.stl

Multicolor Multipart Dropy

Wall support for my 6ft ender 3

for my six foot tall ender 3

( brackets remixed : https://www.thingiverse.com/thing:5821643)


Wall mount.3mf

Days Without Failed Prints

BASE.stl

Locking Block

This is the block that holds the things without any nut-bolt or external things.

" 3D Part Details "

@3D Printing:--
Printer Name :- Creality CR 10 MAX 3D
Printer
Nozzle Size :- 0.8mm

@Wall :--
Wall Line Count :- 4

@Top/Bottom:--
Top/Bottom thickness :- 1.0mm
Top Layer :- 2
bottom Layer :- 2

@Infill :--
Infill Density :- 100%
Infill Patten :- Grid
Infill Line Multiplier :- 2

@Speed :--
Print Speed :- 50mm/s
Infill Speed :- 50mm/s
Wall Speed :- 25mm/s
Outer Wall Speed :- 25mm/s
Inner Wall Speed :- 25mm/s
Top/Bottom Speed :- 25mm/s
Travel Speed :- 150mm/s

@Support :---
Generate Support :- No Support

Video are also there :--

3d Print

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Thin Texture Roller (Low Resin Cost) – Rock Wall Or Path – 4.5 Inches Tall

Spooky house tea light decoration

View 78 new models

12oz CAN Can Cup...

Pikmin - Sign

Sega Saturn Sign

View 72 new models

View 16 new models

Manual Filament Feeder Extruder Gear Knob Mod for CR-10 and other Bowden 3D Printers

View 104 new models

Small Spatula

View 143 new models

Hydrometer and Desiccant Stand for Bambu Lab X1, AMS, Tool Storage

Remove Before Print

THE WALL OF 3D PRINTING

Valentine's Multicolor Multipart Dropy

Multicolor Multipart Dropy

Wall support for my 6ft ender 3

Days Without Failed Prints

Locking Block